Published in:
Open Access 01-10-2014 | Original Article
Development of a dynamic model for ventral hernia mesh repair
Published in: Langenbeck's Archives of Surgery | Issue 7/2014
Login to get accessAbstract
Introduction
The adequate way of mesh fixation in laparoscopic ventral hernia repair is still subject to debate. So far, simulation has only been carried out in a static way, thereby omitting dynamic effects of coughing or vomiting. We developed a dynamic model of the anterior abdominal wall.
Materials and methods
An aluminium cylinder was equipped with a pressure controlled, fluid-filled plastic bag, simulating the abdominal viscera. A computer-controlled system allowed the control of influx and efflux, thus creating pressure peaks of up to 200 mmHg to simulate coughing and 290 mmHg to simulate vomiting. We tested fixation with tacks (Absorbatack, Covidien Deutschland, Neustadt a. D., Germany). The model was controlled for the friction coefficient of the tissue against the mesh and the physiologic elasticity of the abdominal wall surrogate.
Results
The model was able to create pressure peaks equivalent to physiologic coughs or vomiting. Physiologic elasticity was thereby maintained. We could show that the friction coefficient is crucial to achieve a physiologic situation.
The meshes showed a tendency to dislocate with an increasing number of coughs (Fig. 4). Nevertheless, when applied in a plain manner, the meshes withstood more cough cycles than when applied with a bulge as in laparoscopic surgery.
Conclusions
The dynamic movement of the abdominal wall, the friction between tissue and mesh and the way of mesh application are crucial factors that have to be controlled for in simulation of ventral abdominal hernia closure. We could demonstrate that patient specific factors such as the frequency of coughing as well as the application technique influence the long term stability of the mesh.