Published in:
Open Access 01-12-2013 | Methodology
Grip and load force coordination in cyclical isometric manipulation task is not affected by the feedback type
Published in: Journal of NeuroEngineering and Rehabilitation | Issue 1/2013
Login to get accessAbstract
Background
The relationship between normal and tangential force components (grip force – GF and load force – LF, respectively) acting on the digits-object interface during object manipulation reveals neural mechanisms involved in movement control. Here, we examined whether the feedback type provided to the participants during exertion of LF would influence GF-LF coordination and task performance.
Methods
Sixteen young (24.7 ±3.8 years-old) volunteers isometrically exerted continuously sinusoidal FZ (vertical component of LF) by pulling a fixed instrumented handle up and relaxing under two feedback conditions: targeting and tracking. In targeting condition, FZ exertion range was determined by horizontal lines representing the upper (10 N) and lower (1 N) targets, with frequency (0.77 or 1.53 Hz) dictated by a metronome. In tracking condition, a sinusoidal template set at similar frequencies and range was presented and should be superposed by the participants’ exerted FZ. Task performance was assessed by absolute errors at peaks (AEPeak) and valleys (AEValley) and GF-LF coordination by GF-LF ratios, maximum cross-correlation coefficients (rmax), and time lags.
Results
The results revealed no effect of feedback and no feedback by frequency interaction on any variable. AEPeak and GF-LF ratio were higher and rmax lower at 1.53 Hz than at 0.77 Hz.
Conclusion
These findings indicate that the type of feedback does not influence task performance and GF-LF coordination. Therefore, we recommend the use of tracking tasks when assessing GF-LF coordination during isometric LF exertion in externally fixed instrumented handles because they are easier to understand and provide additional indices (e.g., RMSE) of voluntary force control.