Top

Published in:

01-05-2017 | Original Article

Shear bond, wettability and AFM evaluations on CO₂ laser-irradiated CAD/CAM ceramic surfaces

Authors: Ahmed El Gamal, Etienne Medioni, Jean Paul Rocca, Carlo Fornaini, Omid H. Muhammad, Nathalie Brulat-Bouchard

Published in: Lasers in Medical Science | Issue 4/2017

Abstract

The purpose of this study is to determine the CO₂ laser irradiation in comparison with sandblasting (Sb), hydrofluoric acid (Hf) and silane coupling agent (Si) on shear bond strength (SBS), roughness (Rg) and wettability (Wt) of resin cement to CAD/CAM ceramics. Sixty (CAD/CAM) ceramic discs were prepared and distributed into six different groups: group A, control lithium disilicate (Li); group B, control zirconia (Zr); group C, Li: CO₂/HF/Si; group D, Li: HF/Si; group E, Zr: CO₂/Sb/Si; group F, Zr: Sb/Si. Result showed significant difference between irradiated and non-irradiated in terms of shear bond strength for zirconia ceramics (p value = 0.014). Moreover, partial surface wettability for irradiated and non-irradiated ceramics. Irradiated surface demonstrated more rough surface in lithium disilicate than zirconia ceramics. CO₂ irradiation could increase shear bond strength, surface roughness and wettability for both CAD/CAM ceramics.

Craig RG, Powers JM (2002) Restorative dental materials. Mosby Inc, St. Louis

Jensen ME, Sheth JJ, Tolliver D (1989) Etched-porcelain resin-bonded full-veneer crowns: in vitro fracture resistance. Compendium 10:336–338, 340-341, 344-347PubMed

Bergman MA (1999) The clinical performance of ceramic inlays: a review. Dent J 44:157–168

Hayashi M, Wilson NH, Yeung CA, Worthington HV (2003) Systematic review of ceramic inlays. Clin Oral Investig 7:8–19PubMed

Krämer N, Frankenberger R (2005) Clinical performance of bonded leucite-reinforced glass ceramic inlays and onlays after eight years. Dent Mater 21:262–271CrossRefPubMed

Sjögren G, Molin M, Van Dijken JW (1998) A 5-year clinical evaluation of ceramic inlays (Cerec) cemented with a dual-cured or chemically cured resin composite luting agent. Acta Odontol Scand 56:263–267CrossRefPubMed

Braga RR, Ballester RY, Daronch M (2000) Influence of time and adhesive system on the extrusion shear strength between feldspathic porcelain and bovine dentin. Dent Mater 16:303–310CrossRefPubMed

Román-Rodríguez JL, Roig-Vanaclocha A, Fons-Font A, Granell-Ruiz M, Solá-Ruiz MF, Amigó-Borrás V et al (2010) In vitro experimental study of bonding between aluminium oxide ceramics and resin cements. Med Oral Patol Oral Cir Bucal 15:95–100

Chen JH, Matsumura H, Atsuta M (1998) Effect of different etching periods on the bond strength of a composite resin to a machinable porcelain. J Dent 26:53–58CrossRefPubMed

10.

Chen JH, Matsumura H, Atsuta M (1998) Effect of etchant, etching period, and silane priming on bond strength to porcelain of composite resin. Oper Dent 23:250–257PubMed

11.

Saracoglu ACC, Cotert HS (2004) Effect of various surface treatment methods on the bond strength of the heat-pressed ceramic samples. J Oral Rehabil 31:790–797CrossRefPubMed

12.

Suliman AH, Swift EJ Jr, Perdigao J (1993) Effects of surface treatment and bonding agents on bond strength of composite resin to porcelain. J Prosthet Dent 70(2):118–120CrossRefPubMed

13.

Thurmond JW, Barkmeier WW, Wilwerding TM (1994) Effect of porcelain surface treatments on bond strength of composite resin bonded to porcelain. J Prosthet Dent 72(4):355–359CrossRefPubMed

14.

Kupiec KA, Wuertz KM, Barkmeier WW, Wilwerding TM (1996) Evaluation of porcelain surface treatments and agents for composite-to-porcelain repair. J Prosthet Dent 76(2):119–124CrossRefPubMed

15.

Corazza PH, Cavalcanti SC, Queiroz JR, Bottino MA, Valandro LF (2013) Effect of post-silanization heat treatments of silanized feldspathic ceramic on adhesion to resin cement. J Adhes Dent 15(5):473–479PubMed

16.

He M, Zhang Z, Zheng D, Ding N, Liu Y (2014) Effect of sandblasting on surface roughness of zirconia-based ceramics and shear bond strength of veneering porcelain. Dent Mater 33(6):778–785CrossRef

17.

Chen TM, Brauer GM (1982) Solvent effects on bonding organo silane to silica surfaces. J Dent Res 61:1439–1443CrossRefPubMed

18.

Ural C, Kulunk T, Kulunk S, Kurt M (2010) The effect of laser treatment on bonding between zirconia ceramic surface and resin cement. Acta Odontol Scand 68(6):354–359CrossRefPubMed

19.

Akyil MS, Uzun IH, Bayindir F (2010) Bond strength of resin cement to yttrium-stabilized tetragonal zirconia ceramic treated with air abrasion, silica coating, and laser irradiation. Photomed Laser Surg 28(6):801–808CrossRefPubMed

20.

Stubinger S, Homann F, Etter C, Miskiewicz M, Wieland M, Sader R (2008) Effect of Er:YAG, CO(2) and diode laser irradiation on surface properties of zirconia endosseous dental implants. Lasers Surg Med 40(3):223–228CrossRefPubMed

21.

Akin H, Ozkurt Z, Kirmali O, Kazazoglu E, Ozdemir AK (2011) Shear bond strength of resin cement to zirconia ceramic after aluminum oxide sandblasting and various laser treatments. Photomed Laser Surg 29(12):797–802CrossRefPubMed

22.

Paranhos MP, Burnett LH Jr, Magne P (2011) Effect of Nd:YAG laser and CO₂ laser treatment on the resin bond strength to zirconia ceramic. Quintessence Int 42(1):79–89PubMed

23.

Rocca JP, Fornaini C, Brulat N, Seif B, Darque ceretti E (2014) CO₂ and Nd:YAP laser interaction with lithium disilicate and zirconia dental ceramics: a preliminary study. Opt Laser Technol 57:216–223CrossRef

24.

El Gamal A, Rocca JP, Fornaini C, Muhammad O, Medioni E, Cucinotta A, Brulat-Bouchard N (2016) The effect of CO₂ and Nd:YAP lasers on CAD/CAM ceramics: SEM, EDS and thermal studies. Laser Ther 25(1):27–34CrossRefPubMedPubMedCentral

25.

Filho AM, Vieira LC, Araujo E, Monteiro Junior S (2004) Effect of different ceramic surface treatments on resin microtensile bond strength. J Prosthodont 13(1):28–35CrossRefPubMed

26.

Ozcan M, Alkumru HN, Gemalmaz D (2001) The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic. Int J Prosthodont 14:335–339PubMed

27.

Della Bona A, Anusavice KJ, Shen C (2000) Microtensile strength of composite bonded to hot-pressed ceramics. J Adhes Dent 2(4):305–313PubMed

28.

Piwowarczyk A, Hauer HC, Sorensen JA (2004) In vitro shear bond strength of cementing agents to fixed prosthodontic restorative materials. J Prosthet Dent 92(3):265–273CrossRefPubMed

29.

Della Bona A, Shen C, Anusavice KJ (2004) Work of adhesion of resin on treated lithia disilicate-based ceramic. Dent Mater 20(4):338–344CrossRefPubMed

30.

Ozcan M, Vallittu PK (2003) Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater 19(8):725–731CrossRefPubMed

31.

Ersu B, Yuzugullu B, Yazici AR, Canay S (2009) Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments. J Dent 37(11):848–856CrossRefPubMed

32.

Kasraei S, Atefat M, Beheshti M, Safavi N, Mojtahedi M, Rezaei-Soufi L (2014) Effect of surface treatment with carbon dioxide (CO₂) laser on bond strength between cement resin and zirconia. J Lasers Med Sci 5(3):115–120PubMedPubMedCentral

33.

Ural C, KalyoncuoĞlu E, Balkaya V (2012) The effect of different power outputs of carbon dioxide laser on bonding between zirconia ceramic surface and resin cement. Acta Odontol Scand 70(6):541–546CrossRefPubMed

34.

Gökçe B, Ozpinar B, Dündar M, Cömlekoglu E, Sen BH, Güngör MA (2007) Bond strengths of all-ceramics: acid vs laser etching. Oper Dent 32(2):173–178CrossRefPubMed

35.

Naichuan S, Li Y, Yunamo L, Wenjia L, Hai Z, Xin L, Hang W, Jiefei S (2015) The effect of various sandblasting conditions on surface changes of dental zirconia and shear bond strength between zirconia core and indirect composite resin. J Adv Prosthodont 7:214–223CrossRef

36.

De Oyagu RC, Monticelli F, Toledano M, Osorio E, Ferrari M, Osorio R (2009) Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic. Dent Mater 25:172–199CrossRef

37.

Li R, Ren Y, Han J (2000) Effects of pulsed Nd:YAG laser irradiation on shear bond strength of composite resin bonded to porcelain. Hua Xi Kou Qiang Yi Xue Za Zhi 18(6):377–379PubMed

38.

Shiu P, De Souza-Zaroni WC, de Eduardo CP, Youssef MN (2007) Effect of feldspathic ceramic surface treatments on bond strength to resin cement. Photomed Laser Surg 25:291–296CrossRefPubMed

39.

Akyıl MS, Yılmaz A, Karaalioğlu OF, Duymuş ZY (2010) Shear bond strength of repair composite resin to an acid-etched and a laser-irradiated feldspathic ceramic surface. Photomed Laser Surg 28:539–545CrossRefPubMed

40.

Blatz MB, Sadan A, Kern M (2003) Resin-ceramic bonding: a review of the literature. J Prosthet Dent 289:268–274CrossRef

41.

Aboushelib MN, de Jager N, Kleverlaan CJ, Feilzer AJ (2006) Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: zirconia veneering ceramics. Dent Mater 22:857–863CrossRefPubMed

Title: Shear bond, wettability and AFM evaluations on CO2 laser-irradiated CAD/CAM ceramic surfaces
Authors: Ahmed El Gamal
Etienne Medioni
Jean Paul Rocca
Carlo Fornaini
Omid H. Muhammad
Nathalie Brulat-Bouchard
Publication date: 01-05-2017
Publisher: Springer London
Published in: Lasers in Medical Science / Issue 4/2017
Print ISSN: 0268-8921
Electronic ISSN: 1435-604X
DOI: https://doi.org/10.1007/s10103-017-2171-4

At a glance: The STEP trials

Springer Medicine

Shear bond, wettability and AFM evaluations on CO₂ laser-irradiated CAD/CAM ceramic surfaces

Abstract

At a glance: The STEP trials

Springer Medicine

Abstract

Please log in to get access to this content

Other articles of this Issue 4/2017

The association between Nd:YAG laser and desensitizing dentifrices for the treatment of dentin hypersensitivity

GreenLight laser photoselective vaporization of the prostate for treatment of benign prostate hyperplasia/lower urinary tract symptoms in patients with different post-void residual urine

Effect of laser on pain relief and wound healing of recurrent aphthous stomatitis: a systematic review

Neuropeptide expression and morphometric differences in crushed alveolar inferior nerve of rats: Effects of photobiomodulation

Effect of high laser output on the central bronchi and pulmonary artery

Letter regarding “Same strategy for pitfalls of radiotherapy in different anatomical districts”