Published in:
Open Access 01-12-2022 | Prostatectomy | Clinical Research Article
Positive end-expiratory pressure setting based on transpulmonary pressure during robot-assisted laparoscopic prostatectomy: an observational intervention study
Published in: JA Clinical Reports | Issue 1/2022
Login to get accessAbstract
Background
In robot-assisted laparoscopic prostatectomy (RALP), concerns include the formation of atelectasis and reduced functional residual capacity. The present study aimed to examine the feasibility of positive end-expiratory pressure (PEEP) setting based on transpulmonary pressure (Ptp) as well as the effects of incremental PEEP on respiratory mechanics, blood gases, cerebral oxygenation (rSO2), and hemodynamics.
Methods
Fourteen male patients who were scheduled to receive RALP were recruited. Patients received mechanical ventilation (tidal volume of 6 mL kg−1) and were placed in Trendelenburg position with positive-pressure capnoperitoneum. PEEP levels were increased from 0 to 15 cmH2O (5 cmH2O per increase) every 30 min. PEEP levels were assessed where end-expiratory Ptp levels of ≥0 cmH2O were achieved (PtpEEP0). Airway pressure, esophageal pressure, cardiac index, and blood gas and rSO2 values were measured after 30 min at each PEEP step and respiratory mechanics were calculated.
Results
With increasing PEEP levels from 0 to 15 cmH2O or PtpEEP0, the values of PaO2 and respiratory system compliance increased, and the values of driving pressure decreased. The median PEEP level associated with PtpEEP0 was 15 cmH2O. Respiratory system compliance values were higher at PtpEEP0 than those at PEEP5 (P = 0.02). Driving pressure was significantly lower at PtpEEP0 than at PEEP5 (P = 0.0036). The cardiac index remained unchanged, and the values of rSO2 were higher at PtpEEP0 than at PEEP0 (right; P = 0.0019, left; P = 0.036).
Conclusions
PEEP setting determined by transpulmonary pressure can help achieve higher respiratory system compliance values and lower driving pressure without disturbing hemodynamic parameters.