Skip to main content
Key Specialties
Cardiology Diabetology Endocrinology Gastroenterology Geriatrics and Gerontology Gynecology and Obstetrics Hematology Infectious Disease Internal Medicine Nephrology Neurology Oncology Pediatrics Respiratory Medicine Rheumatology Surgery
Congress Coverage
2024 ASCO Annual Meeting 2024 ACC Congress 2023 ESMO Congress 2023 EASD Congress 2023 ERS Congress 2023 ESC Congress
Clinical Collections
Advances in Alzheimer’s

2024 ASCO Annual Meeting

Keep up to date with all the top stories and latest evidence with our hub page, including official congress videos and expert takeaways.
ADVANCED SEARCH
Log in
Top
European Archives of Paediatric Dentistry
Published in: European Archives of Paediatric Dentistry 1/2019

01-02-2019 | Original Scientific Article

Influence of self-etch all-in-one adhesives on fissure sealant shear bond strength under contaminated enamel conditions

Authors: A. Coelho, J. P. Canta, J. N. R. Martins, S. Arantes-Oliveira, P. F. Marques

Published in: European Archives of Paediatric Dentistry | Issue 1/2019

Login to get access

Abstract

Aim

To determine the influence of two all-in-one self-etching adhesive systems on shear bond strength of a fissure sealant applied under different enamel surface conditions.

Methods

A total of 180 bovine enamel specimens were randomly distributed to nine experimental groups, defined by the combination of the sealant application technique (using phosphoric acid, or a self-etching water-based adhesive or a self-etching ethanol and water-based adhesive) and enamel surface conditions (dry enamel, saliva or water contaminated enamel). The specimens were submitted to thermocycling prior to the shear bond strength test.

Results

High shear bond strength mean values were obtained with the classic technique for dry enamel (31.47 MPa), statistically similar values were obtained when the sealant was combined with a self-etching water-based adhesive, in dry enamel (32.36 MPa), and when the sealant was combined with a self-etching water-based adhesive in water contaminated enamel (32.62 MPa). Under enamel salivary contamination, the best results were achieved using a water-based adhesive (24.78 MPa).

Conclusions

In saliva contaminated enamel, the combination of a sealant with a water-based self-etching adhesive can maintain high and satisfactory values of bond strength.
Literature
Al-Sarheed MA. Evaluation of shear bond strength and SEM observation of all-in-one self-etching primer used for bonding of fissure sealants. J Contemp Dent Pract. 2006;7(2):9–16.PubMedCrossRef
Anusavice KJ, Brantley WA. Physical properties of dental materials. In: Anusavice KJ, editor. Phillips’ science of dental materials. 11th ed. St. Louis: Elsevier Science; 2003. p. 41–71.
Asselin M, Sitbon Y, Fortin D, Abelardo L, Rompre PH. Bond strength of a sealant to permanent enamel: evaluation of 3 application protocols. Pediatr Dent. 2009;31(4):323–28.PubMed
Barkmeier W, Cooley R. Laboratory evaluation of adhesive systems. Oper Dent. 1992;5(Suppl):50–61.PubMed
Barroso JM, Torres CP, Lessa FCR, et al. Shear bond strength of pit-and-fissure sealants to saliva-contaminated and noncontaminated enamel. J Dent Child (Chic). 2005;72(3):95–9.
Bogert TR, García-Godoy F. Effect of prophylaxis agents on the shear bond strength of a fissure sealant. Pediatr Dent. 1992;14(1):50–1.PubMed
Choi JW, Drummond JL, Dooley R, Punwani I, Soh JM. The efficacy of primer on sealant shear bond strength. Pediatr Dent. 1997;19(4):286–8.PubMed
De Munck J, Van Landuyt K, Peumans M, et al. A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res. 2005;84(2):118–32.CrossRefPubMed
Ernst CP. Positioning self-etching adhesives: versus or in addition to phosphoric acid etching? J Esthet Restor Dent. 2004;16(1):57–69.CrossRefPubMed
Gomes-Silva JM, Torres CP, Contente MMMG, et al. Bond strength of a pit-and-fissure-sealant associated to etch-and-rinse and self-etching adhesive systems to saliva-contaminated enamel: individual vs. simultaneous light curing. Braz Dent J. 2008;19(4):341–7.CrossRefPubMed
Gordan VV, Vargas MA, Cobb DS, Denehy GE. Evaluation of adhesive systems using acidic primers. Am J Dent. 1997;10(5):219–23.PubMed
Hobson RS, McCabe JF. Relationship between enamel etch characteristics and resin-enamel bond strength. Br Dent J. 2002;192(8):463–8.CrossRefPubMed
Ibarra G, Vargas MA, Geurtsen W. Interfacial and surface characterization of two self-etching adhesive systems and a total-etch adhesive after bonding to ground and unground bovine enamel—a qualitative study. Clin Oral Investig. 2006;10(4):331–41.CrossRefPubMed
Jain P, Stewart GP. Effect of dentin primer on shear bond strength of composite resin to moist and dry enamel. Oper Dent. 2000;25(1):51–8.PubMed
Knobloch LA, Meyer T, Kerby RE, Johnston W. Microleakage and bond strength of sealant to primary enamel comparing air abrasion and acid etch techniques. Pediatr Dent. 2005;27(6):463–9.PubMed
Krifka S, Borzsonyi A, Koch A, et al. Bond strength of adhesive systems to dentin and enamel—human vs. bovine primary teeth in vitro. Dent Mater. 2008;24(7):888–94.CrossRefPubMed
Kugel G, Ferrari M. The science of bonding: from first to sixth generation. J Am Dent Assoc. 2000;131(Suppl):20S–25S.CrossRefPubMed
Miyazaki M, Sato M, Onose H. Durability of enamel bond strength of simplified bonding systems. Oper Dent. 2000;25(2):75–80.PubMed
Nakamichi I, Iwaku M, Fusayama T. Bovine teeth as possible substitutes in the adhesion test. J Dent Res. 1983;62(10):1076–81.CrossRefPubMed
Ostby AW, Bishara SE, Denehy GE, Laffoon JF, Warren JJ. Effect of self-etchant pH on the shear bond strength of orthodontic brackets. Am J Orthod Dentofac Orthop. 2008;134(2):203–8.CrossRef
Pashley DH, Tay FR. Aggressiveness of contemporary self-etching systems. Part II: etching effects on unground enamel. Dent Mater. 2001;17(5):430–44.CrossRefPubMed
Perdigão J, Lopes L, Lambrechts P, et al. Effects of a self-etching primer on enamel shear bond strengths and SEM morphology. Am J Dent. 1997;10(3):141–6.PubMed
Peumans M, Kanumilli P, De Munck J, et al. Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dent Mater. 2005;21(9):864–81.CrossRefPubMed
Peutzfeldt A, Nielsen LA. Bond strength of a sealant to primary and permanent enamel: phosphoric acid versus self-etching adhesive. Pediatr Dent. 2004;26(3):240–4.PubMed
Silverstone LM. State of art on sealant research and priorities for further research. J Dent Educ. 1984;48(2 Suppl):107–18.PubMed
Soderholm KJ, Soares F, Argumosa M, et al. Shear bond strength of one etch-and-rinse and five self-etching dental adhesives when used by six operators. Acta Odontol Scand. 2008;66(4):243–9.CrossRefPubMed
Torres CP, Balbo P, Gomes-Silva JM, et al. Effect of individual or simultaneous curing on sealant bond strength. J Dent Child (Chic). 2005;72(1):31–5.
Townsend RD, Dunn WJ. The effect of saliva contamination on enamel and dentin using a self-etching adhesive. J Am Dent Assoc. 2004;135(7):895–901.CrossRefPubMed
Van Landuyt KL, Peumans M, De Munck J, Lambrechts P, Van Meerbeeck B. Extension of a onestep self-etch adhesive into a multi-step adhesive. Dent Mater. 2006;22(6):533–44.CrossRefPubMed
Van Meerbeeck B, Yoshihara K, Yoshida Y, et al. State of the art of self-etch adhesives. Dent Mater. 2011;27(1):17–28.CrossRef
Metadata
Title
Influence of self-etch all-in-one adhesives on fissure sealant shear bond strength under contaminated enamel conditions
Authors
A. Coelho
J. P. Canta
J. N. R. Martins
S. Arantes-Oliveira
P. F. Marques
Publication date
01-02-2019
Publisher
Springer Berlin Heidelberg
Published in
European Archives of Paediatric Dentistry / Issue 1/2019
Print ISSN: 1818-6300
Electronic ISSN: 1996-9805
DOI
https://doi.org/10.1007/s40368-018-0378-0

Other articles of this Issue 1/2019

European Archives of Paediatric Dentistry 1/2019 Go to the issue

Original Scientific Article

Dental and medical practitioners’ perception of community water fluoridation as a caries preventive measure

Letter to the Editor

Letter to the editor

Systematic Review

Evaluation of the efficiency of fluoride-releasing adhesives for preventing secondary caries in-vitro: a systematic review and meta-analysis

Original Scientific Article

Microshear bond strength of different restorative materials to teeth with molar-incisor-hypomineralisation (MIH): a pilot study

Original Scientific Article

Comparative evaluation of surface roughness of posterior primary zirconia crowns

Original Scientific Article

Changes in occlusal bite force following placement of preformed metal crowns on primary molars in 4–6 years old children: a 6 months’ follow-up pilot study