Top

Published in:

01-10-2016 | Case Report

Three-dimensional printing for preoperative planning of total hip arthroplasty revision: case report

Authors: Joseph Zerr, Yonatan Chatzinoff, Rajiv Chopra, Kenneth Estrera, Avneesh Chhabra

Published in: Skeletal Radiology | Issue 10/2016

Abstract

Three dimensional (3D) printing can be used to create material models to aid preoperative planning of complex orthopedic procedures as exemplified by this case of total hip arthroplasty failure due to infection with resulting severe acetabular bone stock deficiency. The 3D model allowed for trialing of the acetabular component to determine cup size, position, and screw placement. Most importantly, the model confirmed that there was not a pelvic discontinuity and the revision shell would be sufficient for the reconstruction. Previously, the cost and complexity of utilization of 3D printers were prohibitive. Recent improvements in commercially available 3D printers have made rapid prototype model creation a realistic option, which can facilitate difficult surgery.

Chung KJ, Hong DY, Kim YT, Yang I, Park YW, Kim HN. Preshaping plates for minimally invasive fixation of calcaneal fractures using a real-size 3D-printed model as a preoperative and intraoperative tool. Foot Ankle Int. 2014;35(11):1231–6.CrossRefPubMed

Ciocca L, De Crescenzio F, Fantini M, Scotti R. CAD/CAM and rapid prototyped scaffold construction for bone regenerative medicine and surgical transfer of virtual planning: a pilot study. Comput Med Imaging Graph. 2009;33(1):58–62.CrossRefPubMed

Jastifer JR, Gustafson PA. Three-dimensional printing and surgical simulation for preoperative planning of deformity correction in foot and ankle surgery. J Foot Ankle Surg. 2016.

Ma L, Zhou Y, Zhu Y, Lin Z, Wang Y, Zhang Y, et al. 3D-printed guiding templates for improved osteosarcoma resection. Sci Rep. 2016;6:23335.CrossRefPubMedPubMedCentral

Windisch G, Salaberger D, Rosmarin W, Kastner J, Exner GU, Haldi-Brändle V, et al. A model for clubfoot based on micro-CT data. J Anat. 2007;210(6):761–6.CrossRefPubMedPubMedCentral

Gittard SD, Narayan RJ, Lusk J, Morel P, Stockmans F, Ramsey M, et al. Rapid prototyping of scaphoid and lunate bones. Biotechnol J. 2009;4(1):129–34.CrossRefPubMed

Guarino J, Tennyson S, McCain G, Bond L, Shea K, King H. Rapid prototyping technology for surgeries of the pediatric spine and pelvis: benefits analysis. J Pediatr Orthop. 2007;27(8):955–60.CrossRefPubMed

McGurk M, Amis AA, Potamianos P, Goodger NM. Rapid prototyping techniques for anatomical modelling in medicine. Ann R Coll Surg Engl. 1997;79(3):169–74.PubMedPubMedCentral

Giovinco NA, Dunn SP, Dowling L, Smith C, Trowell L, Ruch JA, et al. A novel combination of printed 3-dimensional anatomic templates and computer-assisted surgical simulation for virtual preoperative planning in Charcot foot reconstruction. J Foot Ankle Surg. 2012;51(3):387–93.CrossRefPubMed

10.

Holubar SD, Hassinger JP, Dozois EJ, Camp JC, Farley DR, Fidler JL, et al. Virtual pelvic anatomy and surgery simulator: an innovative tool for teaching pelvic surgical anatomy. Stud Health Technol Inform. 2009;142:122–4.PubMed

11.

Bizzotto N, Sandri A, Regis D, Romani D, Tami I, Magnan B. Three-dimensional printing of bone fractures: a new tangible realistic way for preoperative planning and education. Surg Innov. 2015;22(5):548–51.CrossRefPubMed

12.

Li H, Qu X, Mao Y, Dai K, Zhu Z. Custom acetabular cages offer stable fixation and improved hip scores for revision THA with severe bone defects. Clin Orthop Relat Res. 2016;474(3):731–40.CrossRefPubMed

13.

Hurson C, Tansey A, O’Donnchadha B, Nicholson P, Rice J, McElwain J. Rapid prototyping in the assessment, classification and preoperative planning of acetabular fractures. Injury. 2007;38(10):1158–62.CrossRefPubMed

14.

Zeng C, Xiao J, Wu Z, Huang W. Evaluation of three-dimensional printing for internal fixation of unstable pelvic fracture from minimal invasive para-rectus abdominis approach: a preliminary report. Int J Clin Exp Med. 2015;8(8):13039–44.PubMedPubMedCentral

15.

Xu J, Li D, Ma RF, Barden B, Ding Y. Application of rapid prototyping pelvic model for patients with DDH to facilitate arthroplasty planning: a pilot study. J Arthroplasty. 2015;30(11):1963–70.CrossRefPubMed

16.

Fedorov A, Beichel R, Kalpathy-Cramer J, Finet J, Fillion-Robin JC, Pujol S, et al. 3D Slicer as an image computing platform for the quantitative imaging network. Magn Reson Imaging. 2012;30(9):1323–41.CrossRefPubMedPubMedCentral

17.

Paprosky WG, Perona PG, Lawrence JM. Acetabular defect classification and surgical reconstruction in revision arthroplasty: a 6-year follow-up evaluation. J Arthroplasty. 1994;9(1):33–44.CrossRefPubMed

Title: Three-dimensional printing for preoperative planning of total hip arthroplasty revision: case report
Authors: Joseph Zerr
Yonatan Chatzinoff
Rajiv Chopra
Kenneth Estrera
Avneesh Chhabra
Publication date: 01-10-2016
Publisher: Springer Berlin Heidelberg
Published in: Skeletal Radiology / Issue 10/2016
Print ISSN: 0364-2348
Electronic ISSN: 1432-2161
DOI: https://doi.org/10.1007/s00256-016-2444-1

Keynote webinar | Spotlight on medication adherence

Springer Medicine

Three-dimensional printing for preoperative planning of total hip arthroplasty revision: case report

Abstract

Keynote webinar | Spotlight on medication adherence

Springer Medicine

Abstract

Please log in to get access to this content

Other articles of this Issue 10/2016

Fracture of an unossified humeral medial epicondyle: use of magnetic resonance imaging for diagnosis

Primary rhabdomyosarcoma of the distal femoral diaphysis: a case report and review of the literature

Ultrasound-guided percutaneous lavage of calcific bursitis of the medial collateral ligament of the knee: a case report and review of the literature

Advanced metal artifact reduction MRI of metal-on-metal hip resurfacing arthroplasty implants: compressed sensing acceleration enables the time-neutral use of SEMAC

Accuracy and efficacy of fluoroscopy-guided pars interarticularis injections on immediate and short-term pain relief

Erdheim-Chester disease with bilateral Achilles tendon involvement