Top

Published in:

01-07-2007 | Original Article

Pullout strength of anterior spinal instrumentation: a product comparison of seven screws in calf vertebral bodies

Authors: Konrad Seller, Dieter Wahl, Alexander Wild, Rüdiger Krauspe, Erich Schneider, Berend Linke

Published in: European Spine Journal | Issue 7/2007

Abstract

A lot of new implant devices for spine surgery are coming onto the market, in which vertebral screws play a fundamental role. The new screws developed for surgery of spine deformities have to be compared to established systems. A biomechanical in vitro study was designed to assess the bone–screw interface fixation strength of seven different screws used for correction of scoliosis in spine surgery. The objectives of the current study were twofold: (1) to evaluate the initial strength at the bone–screw interface of newly developed vertebral screws (Universal Spine System II) compared to established systems (product comparison) and (2) to evaluate the influence of screw design, screw diameter, screw length and bone mineral density on pullout strength. Fifty-six calf vertebral bodies were instrumented with seven different screws (USS II anterior 8.0 mm, USS II posterior 6.2 mm, KASS 6.25 mm, USS II anterior 6.2 mm, USS II posterior 5.2 mm, USS 6.0 mm, USS 5.0 mm). Bone mineral density (BMD) was determined by quantitative computed tomography (QCT). Failure in axial pullout was tested using a displacement-controlled universal test machine. USS II anterior 8.0 mm showed higher pullout strength than all other screws. The difference constituted a tendency (P = 0.108) when compared to USS II posterior 6.2 mm (+19%) and was significant in comparison to the other screws (+30 to +55%, P < 0.002). USS II posterior 6.2 mm showed significantly higher pullout strength than USS 5.0 mm (+30%, P = 0.014). The other screws did not differ significantly in pullout strength. Pullout strength correlated significantly with BMD (P = 0.0015) and vertebral body width/screw length (P < 0.001). The newly developed screws for spine surgery (USS II) show higher pullout strength when compared to established systems. Screw design had no significant influence on pullout force in vertebral body screws, but outer diameter of the screw, screw length and BMD are good predictors of pullout resistance.

Alobaid A, Arlet V, Busato A et al (2005) Pull-out strength of the suprapedicle claw construct: a biomechanical study. Eur Spine J 14:759–764PubMedCrossRef

Bai B, Kummer FJ, Spivak J (2001) Augmentation of anterior vertebral body screw fixation by an injectable, biodegradable calcium phosphate bone substitute. Spine 26:2679–2683PubMedCrossRef

Breeze SW, Doherty BJ, Noble PS et al (1998) A biomechanical study of anterior thoracolumbar screw fixation. Spine 23:1829–1831PubMedCrossRef

Brantley AGU, Mayfield JK, Koenemann JB et al (1994) The effects of pedicle screw fit: an in vitro study. Spine 19:1752–1758PubMedCrossRef

Cotterill PC, Kostuik JP, D`Angelo G et al (1986) An anatomical comparison of the human and bovine thorakolumbar spine. J Orthopaedic Res 4:298–303CrossRef

Dwyer AF, Newton NC, Sherwood AA (1969) An anterior approach to scoliosis: a preliminary report. Clin Orthop 62:191–202

Eysel P, Schwitalle M, Oberstein A et al (1998) Preoperative estimation of screw fixation strength in vertebral bodies. Spine 23:174–180PubMedCrossRef

Farcy JP, Weidenbaum M, Michelsen CB et al (1987) A comparative biomechanical study of spinal fixation using Cotrel-Dubousset instrumentation. Spine 12:877–881PubMedCrossRef

Ferguson SJ, Winkler F, Nolte LP (2002) Anterior fixation in the osteoporotic spine: cut-out and pullout characteristics of implants. Eur Spine J 11:527–534PubMedCrossRef

10.

Frandsen PA, Christofferson H, Madsen T (1984) Holding Power of different screws in the femoral head. Acta Othop 55:349–351

11.

Gaines RW, Carson WL, Satterlee CC et al (1991) Experimental evaluation of seven different spinal fracture internal fixation devices using nonfailure stability testing. Spine 16:902–909PubMedCrossRef

12.

Gilbert SG, Johns PC, Chow DC et al (1993) Relation of vertebral bone screw axial pullout strength to quantitative computed tomographic trabecular bone mineral content. J Spinal Disord 6:513–521PubMed

13.

Gurr KR, McAfee PC, Shih CM (1988) Biomechanical analysis of posterior instrumentation systems after decompressive laminectomy: an unstable calf-spine model. J Bone Joint Surg Am 70:680–691PubMed

14.

Gurwitz GS, Dawson JM, McNamara MJ et al (1993) Biomechanical analysis of three surgical approaches for lumbar burst fractures using short-segment instrumentation. Spine 18:977–982PubMedCrossRef

15.

Hackenberg L, Clahsen H, Halm H (1998) Influencing factors on the holding-power of spine surgery screws—experimental examninations. Z Orthop Ihre Grenzgeb 136:451–456PubMed

16.

Halvorson TL, Kelley LA, Thomas KA et al (1994) Effects of bone mineral density on pedicle screw fixation. Spine 19:2415–2420PubMedCrossRef

17.

Hopf C, Eysel P, Dubousset J (1995) CDH—first report on a new primary stable anterior spine instrumentation. Z Orthop Ihre Grenzgeb 133:274–281PubMed

18.

Horton WC, Blackstock SF, Norman JT et al (1996) Strength of fixation of anterior vertebral body screws. Spine 21:439–444PubMedCrossRef

19.

Hughes AN, Jordan BA (1972) The mechanical properties of surgical bone screws and some aspects of insertions practice. Injury 4:25–37PubMedCrossRef

20.

Jordan BA, Hughes AN (1978) A review of the factors affecting design, specification and material selection of screws for use in orthopedic surgery. Eng Med 7:114–123

21.

Kaneda K, Shono Y, Satoh S et al (1996) New anterior instrumentation for the management of thoracolumbar and lumbar scoliosis: application of the Kaneda two-rod system. Spine 21:1250–1262PubMedCrossRef

22.

Korovessis PG, Deligianni D, Stamakis M et al (1998) Augmentation of anterior transvertebral screws using threaded teflon anchoring. J Spinal Disord 11:300–306PubMed

23.

Kumano K, Hirabayasi S, Ogawa Y et al (1994) Pedicle screws and bone mineral density. Spine 19:1157–1161PubMedCrossRef

24.

Liebermann IH, Khazim R. Woodside T (1998) Anterior vertebral body screw pullout testing. A comparison of Zielke, Kaneda, Universal Spine System, and Universal Spine System with pullout-resistant nut. Spine 23:908–910CrossRef

25.

Lim TH, An HS, Evanich C et al (1995) Strength of anterior vertebral screw fixation in relationship to bone mineral density. J Spinal Disord 8:121–125PubMedCrossRef

26.

Lim TH, An HS, Hong JH et al (1997) Biomechanical Evaluation of anterior and posterior fixations in an unstable calf spine model. Spine 22:261–266PubMedCrossRef

27.

Lin LC, Chen HH, Sun SP (2003) A biomechanical study of the cortex anchorage vertebral screw. Clin Biomech 18:25–32CrossRef

28.

Mosekilde L, Mosekilde L, Danielsen CC (1987) Biomechanical competence of vertebral trabecular bone in relation to ash density and age in normal individuals. Bone 8:79–86PubMedCrossRef

29.

Nunamaker DM, Perren SM (1976) Force measurement in screw fixation. J Biomech 9:669–675CrossRef

30.

Ogon M, Haid C, Krismer M et al (1996) Comparison between single-screw and triangulated, double-screw fixation in anterior spine surgery. Spine 21:2728–2734PubMedCrossRef

31.

Okuyama K, Sato K, Abe E et al (1993) Stability of transpedicle screwing for the osteoporotic spine. Spine 18:2240–2245PubMedCrossRef

32.

Pfeiffer M, Gilbertson LG, Goel VK et al (1996) Effect of specimen fixation method on pullout tests of pedicle screws. Spine 21:1037–1044PubMedCrossRef

33.

Pitzen T, Barbier D, Tintinger F et al (2002) Screw fixation to the posterior cortical shell does not influence peak torque and pullout in anterior cervical plating. Eur Spine J 11:494–499PubMedCrossRef

34.

Pitzen T Franta F, Barbier D et al (2004) Insertion torque and pullout force of rescue screws for anterior cervical plate fixation in a fatigued initial pilot hole. J Neurosurg Spine 1:198–201

35.

Pitzen T, Drumm J, Bruchmann B et al (2006) Effectiveness of cemented rescue screws for anterior cervical plate fixation. J Neurosurg Spine 4:60–63PubMed

36.

Rassi-Neto A, Shimano A (2002) Biomechanical properties of expander compared with conventional screws. J Neurosurg Spine 3 97:346–349

37.

Reinhold M, Schwieger K, Goldhahn J et al (2006) Influence of screw positioning in a new anterior spine fixator on implant loosening in osteoporotic vertebrae. Spine 31:406–413PubMedCrossRef

38.

Riley LH, Eck JC, Yoshida H et al (2004) A biomechanical comparison of calf versus cadaver lumbar spine models. Spine 29:E217–E220PubMedCrossRef

39.

Schatzker J, Sanderson R, Murnaghan JP (1975) The holding power of orthopedic screws in vivo. Clin Orthop 108:115–126PubMedCrossRef

40.

Schramm M, Rumbein S, Kraus H et al (2003) Anterior vertebral body screw pullout testing with the hollow modular anchorage system—a comparative in vitro study. Biomed Technik 48:356–361CrossRef

41.

Schultheiss M, Wilke HJ, Claes L et al (2002) MACS-TL twin screw. Orthopäde 31:362–367PubMedCrossRef

42.

Schultheiss M, Wilke HJ, Claes L et al (2002) MACS-TL polyaxial screw XL. A new concept for increasing stability of ventral spondylodesis in the presence of dorsal injuries. Orthopäde 31:397–401PubMedCrossRef

43.

Sell P, Collins M, Dove J (1988) Pedicle screws: axial pull-out strength in lumbar spine. Spine 13:1075–1076PubMedCrossRef

44.

Shimamoto N, Kotani Y, Shono Y et al (2001) Biomechanical evaluation of anterior spinal instrumentation systems for scoliosis: in vitro fatigue simulation. Spine 26:2701–2708PubMedCrossRef

45.

Shono Y, Kaneda K, Yamamoto I (1991) A biomechanical analysis of Zielke, Kaneda, and Cotrel-Dubousset instrumentations in thoracolumbar scoliosis: a calf spine model. Spine 16:1305–1311PubMedCrossRef

46.

Skinner R, Maybee J, Transfeld E et al (1990) Experimental pullout testing and comparison of variables in transpedicular screw fixation. A biomechanical study. Spine 15:195–201PubMedCrossRef

47.

Snyder BD, Zaltz I, Hall JE et al (1993) Predicting the integrity of vertebral bone screw fixation in anterior spinal instrumentation. Spine 18:423–426

48.

Soshi S, Shiba R, Kondo H et al (1991) An experimental study on transpedicular screw fixation in relation to osteoporosis of the lumbar spine. Spine 16:1335–1341PubMedCrossRef

49.

Swartz DE, Wittenberg RH, Shea M et al (1991) Physical and mechanical properties of calf lumbosacral trabecular bone. J Biomech 24:1059–1068PubMedCrossRef

50.

Teschner W, Manitz V, Holzweißig E et al (1983) Anchoring experiments on human cadaver vertebrae using various types of screws. Z Orthop Ihre Grenzgeb 157:206–208CrossRef

51.

Turi M, Johnston CE II, Richards BS (1993) Anterior correction of idiopathic scoliosis using TSRH instrumentation. Spine 18:417–422PubMedCrossRef

52.

Vangness CT, Carter RD, Frankel VH (1981) In vitro evaluation of the loosening characteristics of self-tapped and non-self-tapped cortical bone screws. Clin Orthop 157:279–286

53.

Wilke HJ, Krischak ST Claes LE (1996) Biomechanical comparison of calf and human spines. J Orthop Res 14:500–503PubMedCrossRef

54.

Wilke HK, Krischak ST, Wenger KH et al (1997) Load-displacement properties of the thoracolumbar calf spine: experimental results and comparison to known human data. Eur Spine J 6:129–137PubMedCrossRef

55.

Wittenberg RH, Shea M, Edwards WT et al (1992) A biomechanical study of the fatigue characteristics of thoracolumbar fixation implants in a calf spine model. Spine 17:121–128CrossRef

56.

Yamagata M, Kithahara H, Minami S et al (1992) Mechanical stability of the pedicle screw fixation systems for the lumbar spine. Spine 17(suppl):51–54CrossRef

57.

Zdeblick TA, Warden KE, Zou D et al (1993) Anterior spinal fixators: a biomechanical in vitro study. Spine 18:513–517PubMed

58.

Zielke K, Stunkat R, Beaujean F (1976) Ventrale derotationsspondylodese. Arch Orthop Unfallchir 85:257–277PubMedCrossRef

Title: Pullout strength of anterior spinal instrumentation: a product comparison of seven screws in calf vertebral bodies
Authors: Konrad Seller
Dieter Wahl
Alexander Wild
Rüdiger Krauspe
Erich Schneider
Berend Linke
Publication date: 01-07-2007
Publisher: Springer-Verlag
Published in: European Spine Journal / Issue 7/2007
Print ISSN: 0940-6719
Electronic ISSN: 1432-0932
DOI: https://doi.org/10.1007/s00586-007-0307-0

Keynote webinar | Spotlight on medication adherence

Springer Medicine

Pullout strength of anterior spinal instrumentation: a product comparison of seven screws in calf vertebral bodies

Abstract

Keynote webinar | Spotlight on medication adherence

Springer Medicine

Abstract

Please log in to get access to this content

Other articles of this Issue 7/2007

Loading is more effective than posture in lumbar spinal stenosis: a study with a treadmill equipment

Announcements May 2007

Biomechanical study of anterior spinal instrumentation configurations

Subclassification of low back pain: a cross-country comparison

Spinal mechanical load: a predictor of persistent low back pain? A prospective cohort study

Depression is associated with poorer outcome of lumbar spinal stenosis surgery