Skip to main content
Top
Published in: BMC Health Services Research 1/2017

Open Access 01-12-2017 | Research article

Agility assessment using fuzzy logic approach: a case of healthcare dispensary

Authors: M. Suresh, Rojalin Patri

Published in: BMC Health Services Research | Issue 1/2017

Login to get access

Abstract

Background

Agile concepts are not only beneficial for manufacturing sector but also for service sector such as healthcare. However, assessment of agility has been predominantly done in manufacturing enterprises. This study demonstrates a means to measure agility of a healthcare organization by assessing agility of a university dispensary. Its contribution to the knowledge base is twofold. First, it proposes a means to measure the agility of a healthcare organization and second, it identifies the attributes that prevent agile performance and outlines the suggestive measure to enhance its agile capabilities.

Method

A case study approach has been adopted and fuzzy logic has been employed to measure the agility of the case dispensary. At first, the measures of assessment which include four enablers, fifteen criteria and forty-five attributes have been identified from the literature and rated by the experts indicating the importance of the measures in the assessment. Then, the case dispensary has been assessed on those measures by collecting observed performance rating from decision makers. At last, Fuzzy logic has been applied on the performance rating data to analyze and interpret the agile capability of the dispensary.

Results

The findings suggest that transparent information flow, adequate salary and bonuses for caregivers, reading error in medical descriptions, in house/nearby pathology laboratory services, technical up-gradation of dispensary equipments and facilities, minimization of patient throughput time and adequate training programme for safety practices are the attributes that weakens agile capability of the University dispensary. The current agility of the dispensary was found to be ‘Agile’ which is average in relation to the agility labels.

Conclusion

Attributes such as transparent information flow, adequate salary and bonuses for caregivers, elimination of reading error in medical descriptions, in house/nearby pathology laboratory services, technical up-gradation of dispensary equipments and facilities, minimization of patient throughput time and adequate training programme for safety practices are extremely crucial for enhancing agile capability of a healthcare organization.
Literature
1.
go back to reference Yusuf YY, Sarhadi M, Gunasekaran A. Agile manufacturing: the drivers, concepts and attributes. Int J Prod Econ. 1999;62(1–2):33–43.CrossRef Yusuf YY, Sarhadi M, Gunasekaran A. Agile manufacturing: the drivers, concepts and attributes. Int J Prod Econ. 1999;62(1–2):33–43.CrossRef
2.
go back to reference Naylor JB, Naim MM, Berry D. Legality: integrating the lean and agile manufacturing paradigms in the total supply chain”. Int J Prod Econ. 1999;62:107–18.CrossRef Naylor JB, Naim MM, Berry D. Legality: integrating the lean and agile manufacturing paradigms in the total supply chain”. Int J Prod Econ. 1999;62:107–18.CrossRef
3.
go back to reference Christopher M. The agile supply chain: competing in volatile markets”. Ind Mark Manage. 2000;29(1):37–44.CrossRef Christopher M. The agile supply chain: competing in volatile markets”. Ind Mark Manage. 2000;29(1):37–44.CrossRef
4.
go back to reference Kitzmiller R, Hunt E, Sproat SB. Adopting best practices: “Agility” moves from software development to healthcare project management. CIN - Comp Inform Nurs. 2006;24(2):75–84.CrossRef Kitzmiller R, Hunt E, Sproat SB. Adopting best practices: “Agility” moves from software development to healthcare project management. CIN - Comp Inform Nurs. 2006;24(2):75–84.CrossRef
5.
go back to reference Pipe TB, Buchda VL, Launder S, Hudak B, Hulvey L, Karns KE, Pendergast D. Building personal and professional resources of resilience and agility in the healthcare workplace. Stress Health. 2012;28(1):11–22.CrossRefPubMed Pipe TB, Buchda VL, Launder S, Hudak B, Hulvey L, Karns KE, Pendergast D. Building personal and professional resources of resilience and agility in the healthcare workplace. Stress Health. 2012;28(1):11–22.CrossRefPubMed
6.
go back to reference Teoh SY, Cai S. The process of strategic, agile, innovation development: a healthcare systems implementation case study. J Glob Inf Manage. 2015;23(3):1–22.CrossRef Teoh SY, Cai S. The process of strategic, agile, innovation development: a healthcare systems implementation case study. J Glob Inf Manage. 2015;23(3):1–22.CrossRef
7.
go back to reference Sherehiy B, Karwowski W, Layer JK. A review of enterprise agility: concepts, frameworks, and attributes”. Int J Ind Ergon. 2007;37(5):445–60.CrossRef Sherehiy B, Karwowski W, Layer JK. A review of enterprise agility: concepts, frameworks, and attributes”. Int J Ind Ergon. 2007;37(5):445–60.CrossRef
8.
go back to reference Sherehiy B, Karwowski W. The relationship between work organization and workforce agility in small manufacturing enterprises”. Int J Ind Ergon. 2014;44(3):466–73.CrossRef Sherehiy B, Karwowski W. The relationship between work organization and workforce agility in small manufacturing enterprises”. Int J Ind Ergon. 2014;44(3):466–73.CrossRef
9.
go back to reference Alexopoulou N, Nikolaidou M, Martakos D. Exploring the business process agility issue: an experience report. Int J Inf Syst Model Des. 2013;4(1):25–41.CrossRef Alexopoulou N, Nikolaidou M, Martakos D. Exploring the business process agility issue: an experience report. Int J Inf Syst Model Des. 2013;4(1):25–41.CrossRef
10.
go back to reference Burwitz M, Schlieter H, Esswein W. Agility in medical treatment processes-a model-based approach. In Modellierung. 2012;201:267–79. Burwitz M, Schlieter H, Esswein W. Agility in medical treatment processes-a model-based approach. In Modellierung. 2012;201:267–79.
11.
go back to reference Teoh SY, Chen X. Towards a strategic process model of governance for agile information technology implementation: a healthcare information technology study in China. J Glob Inf Manag. 2013;21(4):17–23.CrossRef Teoh SY, Chen X. Towards a strategic process model of governance for agile information technology implementation: a healthcare information technology study in China. J Glob Inf Manag. 2013;21(4):17–23.CrossRef
12.
go back to reference Saleeshya PG, Subash Babu A, Vishnu AS. A model to assess the agility of manufacturing organizations: systems approach and application. Int J Prod Qual Manage. 2011;8(3):247–64. Saleeshya PG, Subash Babu A, Vishnu AS. A model to assess the agility of manufacturing organizations: systems approach and application. Int J Prod Qual Manage. 2011;8(3):247–64.
13.
go back to reference Azevedo SG, Carvalho H, Cruz–Machado V. Agile index: automotive supply chain. World Acad Sci, Eng Technol, Int J Mech, Aerosp, Ind, Mechatronic Manuf Eng. 2011;5(7):1433–9. Azevedo SG, Carvalho H, Cruz–Machado V. Agile index: automotive supply chain. World Acad Sci, Eng Technol, Int J Mech, Aerosp, Ind, Mechatronic Manuf Eng. 2011;5(7):1433–9.
14.
go back to reference Saleeshya PG, Babu AS. A combined AHP- and DEA-based approach to measure agility of manufacturing systems. Int J Bus Syst Res. 2012;6(4):431–55.CrossRef Saleeshya PG, Babu AS. A combined AHP- and DEA-based approach to measure agility of manufacturing systems. Int J Bus Syst Res. 2012;6(4):431–55.CrossRef
15.
go back to reference Dong H, Li CL. Agile supply chain performance evaluation of automobile manufacturing based on regression analysis. Appl Mech Mater. 2013;397–400:2662–6.CrossRef Dong H, Li CL. Agile supply chain performance evaluation of automobile manufacturing based on regression analysis. Appl Mech Mater. 2013;397–400:2662–6.CrossRef
16.
go back to reference Aravind Raj S, Sudheer A, Vinodh S, Anand G. A mathematical model to evaluate the role of agility enablers and criteria in a manufacturing environment. Int J Prod Res. 2013;51(19):5971–84.CrossRef Aravind Raj S, Sudheer A, Vinodh S, Anand G. A mathematical model to evaluate the role of agility enablers and criteria in a manufacturing environment. Int J Prod Res. 2013;51(19):5971–84.CrossRef
17.
go back to reference Khalili-Damghani K, Taghavifard M. A three-stage fuzzy DEA approach to measure performance of a serial process including JIT practices, agility indices, and goals in supply chains. Int J Serv Oper Manage. 2012;13(2):147–88. Khalili-Damghani K, Taghavifard M. A three-stage fuzzy DEA approach to measure performance of a serial process including JIT practices, agility indices, and goals in supply chains. Int J Serv Oper Manage. 2012;13(2):147–88.
18.
go back to reference Gunasekaran A. Agile manufacturing: enablers and an implementation framework. Int J Prod Res. 1998;36(5):1223–47.CrossRef Gunasekaran A. Agile manufacturing: enablers and an implementation framework. Int J Prod Res. 1998;36(5):1223–47.CrossRef
19.
go back to reference Gunasekaran A. Design and implementation of agile manufacturing systems. Int J Prod Econ. 1999;62(1):1–6.CrossRef Gunasekaran A. Design and implementation of agile manufacturing systems. Int J Prod Econ. 1999;62(1):1–6.CrossRef
20.
go back to reference Lin CT, Chiu H, Tseng YH. Agility evaluation using fuzzy logic. Int J Prod Econ. 2006;101:353–68.CrossRef Lin CT, Chiu H, Tseng YH. Agility evaluation using fuzzy logic. Int J Prod Econ. 2006;101:353–68.CrossRef
21.
go back to reference Vinodh S, Devadasan SR. Twenty criteria based agility assessment using fuzzy logic approach. Int J Adv Manuf Technol. 2011;54:1219–31.CrossRef Vinodh S, Devadasan SR. Twenty criteria based agility assessment using fuzzy logic approach. Int J Adv Manuf Technol. 2011;54:1219–31.CrossRef
22.
go back to reference Vinodh S, Aravindraj S. Benchmarking agility assessment approaches: a case study. BIJ. 2015;22(1):2–17. Vinodh S, Aravindraj S. Benchmarking agility assessment approaches: a case study. BIJ. 2015;22(1):2–17.
23.
go back to reference Lin CT, Chiu H, Chu PY. Agility index in the supply chain. Int J Prod Econ. 2006;100(2):285–99.CrossRef Lin CT, Chiu H, Chu PY. Agility index in the supply chain. Int J Prod Econ. 2006;100(2):285–99.CrossRef
24.
go back to reference Vinodh S, Devadasan SR, Vasudeva Reddy B, Ravichand K. Agility index measurement using multi-grade fuzzy approach integrated in a 20 criteria agile model. Int J Prod Res. 2010;48(23):7159–76.CrossRef Vinodh S, Devadasan SR, Vasudeva Reddy B, Ravichand K. Agility index measurement using multi-grade fuzzy approach integrated in a 20 criteria agile model. Int J Prod Res. 2010;48(23):7159–76.CrossRef
25.
go back to reference Gunasekaran A, Yusuf YY. Agile manufacturing: a taxonomy of strategic and technological imperatives. Int J Prod Res. 2002;40(6):1357–85.CrossRef Gunasekaran A, Yusuf YY. Agile manufacturing: a taxonomy of strategic and technological imperatives. Int J Prod Res. 2002;40(6):1357–85.CrossRef
26.
go back to reference Vinodh S, Kumar UV, Girubha JR. Thirty-criteria-based agility assessment: a case study in an Indian pump manufacturing organisation. Int J Adv Manuf Technol. 2012;63(9-12):915–29.CrossRef Vinodh S, Kumar UV, Girubha JR. Thirty-criteria-based agility assessment: a case study in an Indian pump manufacturing organisation. Int J Adv Manuf Technol. 2012;63(9-12):915–29.CrossRef
27.
go back to reference Vinodh S, Devadasan SR, Vimal KEK, Kumar D. Design of agile supply chain assessment model and its case study in an Indian automotive components manufacturing organization. J Manuf Syst. 2013;32:620–31.CrossRef Vinodh S, Devadasan SR, Vimal KEK, Kumar D. Design of agile supply chain assessment model and its case study in an Indian automotive components manufacturing organization. J Manuf Syst. 2013;32:620–31.CrossRef
28.
go back to reference Vinodh S. Assessment of sustainability using multi-grade fuzzy approach. Clean Techn Environ Policy. 2011;13(3):509–15.CrossRef Vinodh S. Assessment of sustainability using multi-grade fuzzy approach. Clean Techn Environ Policy. 2011;13(3):509–15.CrossRef
29.
go back to reference Khatwani G, Singh SP, Trivedi A, Chauhan A. Fuzzy-TISM: a fuzzy extension of TISM for group decision making. Glob J Flex Syst Manag. 2015;16(1):97–112.CrossRef Khatwani G, Singh SP, Trivedi A, Chauhan A. Fuzzy-TISM: a fuzzy extension of TISM for group decision making. Glob J Flex Syst Manag. 2015;16(1):97–112.CrossRef
Metadata
Title
Agility assessment using fuzzy logic approach: a case of healthcare dispensary
Authors
M. Suresh
Rojalin Patri
Publication date
01-12-2017
Publisher
BioMed Central
Published in
BMC Health Services Research / Issue 1/2017
Electronic ISSN: 1472-6963
DOI
https://doi.org/10.1186/s12913-017-2332-y

Other articles of this Issue 1/2017

BMC Health Services Research 1/2017 Go to the issue