Skip to main content
Top
Published in: Head & Face Medicine 1/2007

Open Access 01-12-2007 | Methodology

Feasibility of preoperative planning using anatomical facsimile models for mandibular reconstruction

Authors: Corrado Toro, Massimo Robiony, Fabio Costa, Nicoletta Zerman, Massimo Politi

Published in: Head & Face Medicine | Issue 1/2007

Login to get access

Abstract

Background

Functional and aesthetic mandibular reconstruction after ablative tumor surgery continues to be a challenge even after the introduction of microvascular bone transfer. Complex microvascular reconstruction of the resection site requires accurate preoperative planning. In the recent past, bone graft and fixation plates had to be reshaped during the operation by trial and error, often a time-consuming procedure. This paper outlines the possibilities and advantages of the clinical application of anatomical facsimile models in the preoperative planning of complex mandibular reconstructions after tumor resections.

Methods

From 2003 to 2005, in the Department of Maxillofacial Surgery of the University of Udine, a protocol was applied with the preoperative realization of stereolithographic models for all the patients who underwent mandibular reconstruction with microvascular flaps. 24 stereolithographic models were realized prior to surgery before emimandibulectomy or segmental mandibulectomy. The titanium plates to be used for fixation were chosen and bent on the model preoperatively. The geometrical information of the virtual mandibular resections and of the stereolithographic models were used to choose the ideal flap and to contour the flap into an ideal neomandible when it was still pedicled before harvesting.

Results

Good functional and aesthetic results were achieved. The surgical time was decreased on average by about 1.5 hours compared to the same surgical kind of procedures performed, in the same institution by the same surgical team, without the aforesaid protocol of planning.

Conclusion

Producing virtual and stereolithographic models, and using them for preoperative planning substantially reduces operative time and difficulty of the operation during microvascular reconstruction of the mandible.
Appendix
Available only for authorised users
Literature
1.
go back to reference Winder J, Bibb R: Medical rapid prototyping technologies: state of the art and current limitations for application in oral and maxillofacial surgery. J Oral Maxillofac Surg. 2005, 63: 1006-1015. 10.1016/j.joms.2005.03.016.CrossRefPubMed Winder J, Bibb R: Medical rapid prototyping technologies: state of the art and current limitations for application in oral and maxillofacial surgery. J Oral Maxillofac Surg. 2005, 63: 1006-1015. 10.1016/j.joms.2005.03.016.CrossRefPubMed
2.
go back to reference Mankovich NJ, Cheeseman AM, Stoker NG: The display of three-dimensional anatomy with stereolithographic models. J Digit Imaging. 1990, 3: 200-203.CrossRefPubMed Mankovich NJ, Cheeseman AM, Stoker NG: The display of three-dimensional anatomy with stereolithographic models. J Digit Imaging. 1990, 3: 200-203.CrossRefPubMed
3.
go back to reference Rinaldo A, Shaha AR, Wei WI, Silver CE, Ferlito A: Microvascular free flaps: a major advance in head and neck reconstruction. Acta Otolaryngol. 2002, 122: 779-784. 10.1080/003655402/000028041.CrossRefPubMed Rinaldo A, Shaha AR, Wei WI, Silver CE, Ferlito A: Microvascular free flaps: a major advance in head and neck reconstruction. Acta Otolaryngol. 2002, 122: 779-784. 10.1080/003655402/000028041.CrossRefPubMed
4.
go back to reference Eckardt A, Swennen GR: Virtual planning of composite mandibular reconstruction with free fibula bone graft. J Craniofac Surg. 2005, 16: 1137-1140. 10.1097/01.scs.0000186306.32042.96.CrossRefPubMed Eckardt A, Swennen GR: Virtual planning of composite mandibular reconstruction with free fibula bone graft. J Craniofac Surg. 2005, 16: 1137-1140. 10.1097/01.scs.0000186306.32042.96.CrossRefPubMed
5.
go back to reference Ono I, Suda K, Kaneko F: Method for preparing an exact-size model using helical volume scan computed tomography. Plast Reconstr Surg. 1994, 93: 1363-1371. 10.1097/00006534-199406000-00005.CrossRefPubMed Ono I, Suda K, Kaneko F: Method for preparing an exact-size model using helical volume scan computed tomography. Plast Reconstr Surg. 1994, 93: 1363-1371. 10.1097/00006534-199406000-00005.CrossRefPubMed
6.
go back to reference Wolf HP, Lindner A, Millesi W, Rasse M: High precision 3-D model design using CT and stereolithography. CAS. 1994, 1: 46-48. Wolf HP, Lindner A, Millesi W, Rasse M: High precision 3-D model design using CT and stereolithography. CAS. 1994, 1: 46-48.
7.
go back to reference Jacobs PF: Prototyping and manifacturing: Fundamentals of Stereolithography. 1992, New York, McGraw-Hill Jacobs PF: Prototyping and manifacturing: Fundamentals of Stereolithography. 1992, New York, McGraw-Hill
8.
go back to reference Bouyssie JF, Bouyssie S, Sharrock P, Duran D: Stereolithographic models derived from x-ray computed tomography. Reproduction accuracy. Surg Radiol Anat. 1997, 19: 193-199.PubMed Bouyssie JF, Bouyssie S, Sharrock P, Duran D: Stereolithographic models derived from x-ray computed tomography. Reproduction accuracy. Surg Radiol Anat. 1997, 19: 193-199.PubMed
9.
go back to reference Chang PS, Parker TH, Patrick CW, Miller MJ: The accuracy of stereolithography in planning craniofacial bone replacement. J Craniofac Surg. 2003, 14: 164-170. 10.1097/00001665-200303000-00006.CrossRefPubMed Chang PS, Parker TH, Patrick CW, Miller MJ: The accuracy of stereolithography in planning craniofacial bone replacement. J Craniofac Surg. 2003, 14: 164-170. 10.1097/00001665-200303000-00006.CrossRefPubMed
10.
go back to reference Erben C, Vitt KD, Wulf J: First statistical analysis of data collected in the Phidias validation study of stereolithography models. Phidias Newsletter. 2000, 5: 6-12. Erben C, Vitt KD, Wulf J: First statistical analysis of data collected in the Phidias validation study of stereolithography models. Phidias Newsletter. 2000, 5: 6-12.
11.
go back to reference Kernan BT, Wimsatt JA: Use of a stereolithography model for accurate, preoperative adaptation of a reconstruction plate. J Oral Maxillofac Surg. 2000, 58: 349-351. 10.1016/S0278-2391(00)90071-5.CrossRefPubMed Kernan BT, Wimsatt JA: Use of a stereolithography model for accurate, preoperative adaptation of a reconstruction plate. J Oral Maxillofac Surg. 2000, 58: 349-351. 10.1016/S0278-2391(00)90071-5.CrossRefPubMed
12.
go back to reference Cunningham LL, Madsen MJ, Peterson G: Stereolithographic modeling technology applied to tumor resection. J Oral Maxillofac Surg. 2005, 63: 873-878. 10.1016/j.joms.2005.02.027.CrossRefPubMed Cunningham LL, Madsen MJ, Peterson G: Stereolithographic modeling technology applied to tumor resection. J Oral Maxillofac Surg. 2005, 63: 873-878. 10.1016/j.joms.2005.02.027.CrossRefPubMed
13.
go back to reference Brown GA, Milner B, Firoozbakhsh K: Application of computer-generated stereolithography and interpositioning template in acetabular fractures: A report of eight cases. J Orthop Trauma. 2002, 16: 347-352. 10.1097/00005131-200205000-00010.CrossRefPubMed Brown GA, Milner B, Firoozbakhsh K: Application of computer-generated stereolithography and interpositioning template in acetabular fractures: A report of eight cases. J Orthop Trauma. 2002, 16: 347-352. 10.1097/00005131-200205000-00010.CrossRefPubMed
14.
go back to reference D'Urso PS, Earwaker WJ, Barker TM, Redmond MJ, Thompson RG, Effeney DJ: Custom cranioplasty using stereolithography and acrylic. Br J Plast Surg. 2000, 53: 200-204. 10.1054/bjps.1999.3268.CrossRefPubMed D'Urso PS, Earwaker WJ, Barker TM, Redmond MJ, Thompson RG, Effeney DJ: Custom cranioplasty using stereolithography and acrylic. Br J Plast Surg. 2000, 53: 200-204. 10.1054/bjps.1999.3268.CrossRefPubMed
15.
go back to reference Rose EH, Norris MS, Rosen JM: Application of high-tech three-dimensional imaging and computer-generated models in complex facial reconstruction with vascularized bone grafts. Plast Reconstr Surg. 1993, 91: 252-264. 10.1097/00006534-199302000-00007.CrossRefPubMed Rose EH, Norris MS, Rosen JM: Application of high-tech three-dimensional imaging and computer-generated models in complex facial reconstruction with vascularized bone grafts. Plast Reconstr Surg. 1993, 91: 252-264. 10.1097/00006534-199302000-00007.CrossRefPubMed
16.
go back to reference Taylor GI: Discussion. A review of 60 consecutive fibula free flap reconstructions. Plast Reconstr Surg. 1995, 96: 597-602.CrossRef Taylor GI: Discussion. A review of 60 consecutive fibula free flap reconstructions. Plast Reconstr Surg. 1995, 96: 597-602.CrossRef
17.
go back to reference Ueda K, Tajima S, Tanaka Y, Imai K, Maejima S, Yabu K, Song K: Mandibular reconstruction using computer-generated three-dimensional solid models. J Reconstr Microsurg. 1994, 10: 291-296.CrossRefPubMed Ueda K, Tajima S, Tanaka Y, Imai K, Maejima S, Yabu K, Song K: Mandibular reconstruction using computer-generated three-dimensional solid models. J Reconstr Microsurg. 1994, 10: 291-296.CrossRefPubMed
18.
go back to reference Kermer C, Rasse M, Lagogiannis G, Undt G, Wagner A, Millesi W: Colour stereolithography for planning complex maxillofacial tumour surgery. J Craniomaxillofac Surg. 1998, 26: 360-362.CrossRefPubMed Kermer C, Rasse M, Lagogiannis G, Undt G, Wagner A, Millesi W: Colour stereolithography for planning complex maxillofacial tumour surgery. J Craniomaxillofac Surg. 1998, 26: 360-362.CrossRefPubMed
19.
go back to reference Powers DB, Edgin WA, Tabatchnick L: Stereolithography: A historical review and indications for use in the management of trauma. J Craniomaxillofac Trauma. 1998, 4: 16-23.PubMed Powers DB, Edgin WA, Tabatchnick L: Stereolithography: A historical review and indications for use in the management of trauma. J Craniomaxillofac Trauma. 1998, 4: 16-23.PubMed
20.
go back to reference Kermer C, Lindner A, Friede I, Wagner A, Millesi W: Preoperative stereolithographic model planning for primary reconstruction in craniomaxillofacial trauma surgery. J Craniomaxillofac Surg. 1998, 26: 136-139.CrossRefPubMed Kermer C, Lindner A, Friede I, Wagner A, Millesi W: Preoperative stereolithographic model planning for primary reconstruction in craniomaxillofacial trauma surgery. J Craniomaxillofac Surg. 1998, 26: 136-139.CrossRefPubMed
Metadata
Title
Feasibility of preoperative planning using anatomical facsimile models for mandibular reconstruction
Authors
Corrado Toro
Massimo Robiony
Fabio Costa
Nicoletta Zerman
Massimo Politi
Publication date
01-12-2007
Publisher
BioMed Central
Published in
Head & Face Medicine / Issue 1/2007
Electronic ISSN: 1746-160X
DOI
https://doi.org/10.1186/1746-160X-3-5

Other articles of this Issue 1/2007

Head & Face Medicine 1/2007 Go to the issue