Skip to main content
Key Specialties
Cardiology Diabetology Endocrinology Gastroenterology Geriatrics and Gerontology Gynecology and Obstetrics Hematology Infectious Disease Internal Medicine Nephrology Neurology Oncology Pediatrics Respiratory Medicine Rheumatology Surgery
Congress Coverage
2024 ACC Congress 2023 ESMO Congress 2023 EASD Congress 2023 ERS Congress 2023 ESC Congress 2023 EHA Congress 2023 ASCO Annual Meeting
Clinical Collections
Advances in Alzheimer’s

At a glance: The ONWARDS insulin icodec trials

A round-up of the ONWARDS phase 3 clinical trials evaluating the novel weekly insulin icodec in people with diabetes.
ADVANCED SEARCH
Log in
Top
International Journal of Computer Assisted Radiology and Surgery
Published in: International Journal of Computer Assisted Radiology and Surgery 4/2017

01-04-2017 | Original Article

Haptic simulation framework for determining virtual dental occlusion

Authors: Wen Wu, Hui Chen, Yuhai Cen, Yang Hong, Balvinder Khambay, Pheng Ann Heng

Published in: International Journal of Computer Assisted Radiology and Surgery | Issue 4/2017

Login to get access

Abstract

Purpose

The surgical treatment of many dentofacial deformities is often complex due to its three-dimensional nature. To determine the dental occlusion in the most stable position is essential for the success of the treatment. Computer-aided virtual planning on individualized patient-specific 3D model can help formulate the surgical plan and predict the surgical change. However, in current computer-aided planning systems, it is not possible to determine the dental occlusion of the digital models in the intuitive way during virtual surgical planning because of absence of haptic feedback. In this paper, a physically based haptic simulation framework is proposed, which can provide surgeons with the intuitive haptic feedback to determine the dental occlusion of the digital models in their most stable position.

Methods

To provide the physically realistic force feedback when the dental models contact each other during the searching process, the contact model is proposed to describe the dynamic and collision properties of the dental models during the alignment. The simulated impulse/contact-based forces are integrated into the unified simulation framework.

Results

A validation study has been conducted on fifteen sets of virtual dental models chosen at random and covering a wide range of the dental relationships found clinically. The dental occlusions obtained by an expert were employed as a benchmark to compare the virtual occlusion results. The mean translational and angular deviations of the virtual occlusion results from the benchmark were small.

Conclusions

The experimental results show the validity of our method. The simulated forces can provide valuable insights to determine the virtual dental occlusion. The findings of this work and the validation of proposed concept lead the way for full virtual surgical planning on patient-specific virtual models allowing fully customized treatment plans for the surgical correction of dentofacial deformities.
Literature
1.
(2005) The glossary of prosthodontic terms. J Prosthet Dent 94(1):58, by Academy of Prosthodontics
2.
Acosta E, Liu A, Armonda R, Fiorill M, Haluck R, Lake C, Muniz G, Bowyer M (2007) Burrhole simulation for an intracranial hematoma simulator. Stud Health Technol Inform 125:1–6PubMed
3.
Agus M, Giachetti A, Gobbetti E, Zanetti G, Zorcolo A, Picasso B, Franceschini SS (2003) A haptic model of a bone-cutting burr. Stud Health Technol Inform 94:4–10PubMed
4.
Arbabtafti M, Moghaddam M, Nahvi A, Mahvash M, Richardson B, Shirinzadeh B (2011) Physcis-based haptic simulation of bone machining. IEEE Trans Haptics 4(1):39–50CrossRefPubMed
5.
Baker SB, Goldstein JA, Seruya M (2012) Outcomes in computer-assisted surgical simulation for orthognathic surgery. J Craniofac Surg 23(2):509–513CrossRefPubMed
6.
Bender J, Schmitt A (July 2006) Constraint-based collision and contact handling using impulses. In: International conference on computer animation and social agents, pp 3–11
7.
Chang YB, Xia JJ, Gateno J, Xiong Z, Zhou X, Wong ST (2010) An automatic and robust algorithm of reestablishment of digital dental occlusion. IEEE Trans Med Imaging 29(9):1652–1663CrossRefPubMed
8.
Ellis RE, Sarkar N, Jenkins MA (1997) Numerical methods for the force reflection of contact. ASME Trans Dyn Syst Model Control 119:768–774CrossRef
9.
Faber J (2010) Anticipated benefit: a new protocol for orthognathic surgery treatment that eliminates the need for conventional orgthodontic preparation. Dent Press J Orthod 15(1):144–157CrossRef
10.
Garanzha K, Pantaleoni J, McAllister D (2011) Simpler and faster HLBVH with work queues. In: Proceedings of the ACM SIGGRAPH symposium on high performance graphics. ACM, pp 59–64
11.
Jayaratne YS, Zwahlen RA, Lo J, Tam SC, Cheung LK (2010) Computer-aided maxillofacial surgery: an update. Surg Innov 17(3):217–225CrossRefPubMed
12.
Konukseven EI, Önder ME, Mumcuoglu E, Kisnisci RS (2010) Development of a visio-haptic integrated dental training simulation system. J Dent Educ 74(8):880–891PubMed
13.
Kumar Y (2012) Automated virtual treatment planning in orthodontics: modeling and algorithms. Ph.D. dissertation, University of Minnesota
14.
Lauterbach C, Mo Q, Manocha D (2010) gProximity: hierarchical GPU-based operations for collision and distance queries. Comput Graph Forum 29(2):419–428CrossRef
15.
Luciano C, Banerjee P, DeFanti T (2009) Haptics-based virtual reality periodontal training simulator. Virtual Real 13:69–85CrossRef
16.
Mirtich B (1996) Impulse-based dynamic simulation of rigid body systems. Ph.D. dissertation, University of California, Berkeley
17.
Mirtich B, Canny J (1995) Impulse-based simulation of rigid bodies. In: Proceedings of symposium on interactive 3D graphics. ACM, pp 181–188
18.
Morris D, Sewell C, Barbagli F, Salisbury K (2006) Visuohaptic simulation of bone surgery for training and evaluation. IEEE Trans Comput Graph Appl 26(6):48–57CrossRef
19.
Nadjmi N, Mollemans W, Daelemans A, Van Hemelen G, Schutyser F, Bergé S (2010) Virtual occlusion in planning orthognathic surgical procedures. Int J Oral Maxillofac Surg 39(5):457–462CrossRefPubMed
20.
Olsson P, Nysjö F, Hirsch JM, Carlbom IB (2013) A haptics-assisted cranio-maxillofacial surgery planning system for restoring skeletal anatomy in complex trauma cases. Int J Comput Assist Radiol Surg 8(6):887–894CrossRefPubMedPubMedCentral
21.
Pongrácz F, Bárdosi Z (2006) Dentition planning with image-based occlusion analysis. Int J Comput Assist Radiol Surg 1(3):149–156CrossRef
22.
Sharifi A, Jones R, Ayoub A, Moos K, Walker F, Khambay B, McHugh S (2008) How accurate is model planning for orthognathic surgery? Int J Oral Maxillofac Surg 37(12):1089–1093CrossRefPubMed
23.
Sohmura T, Hojo H, Nakajima M, Wakabayashi K, Nagao M, Lida S, Kitagama T, Kogo M, Kojima T, Matsumura K, Nakamura T, Takahashi J (2004) Prototype of simulation of orthognathic surgery using a virtual reality haptic device. Int J Oral Maxillofac Surg 33:740–750CrossRefPubMed
24.
Sohmura T, Iida S, Aikawa T, Kogo M, Iguchi Y, Yamamoto T, Takada K (2009) Simulation of osteotomy and support for surgery using VR haptic device. Stud Health Technol Inform 142:331–36PubMed
25.
Uribe F, Janakiraman N, Shafer D, Nanda R (2013) Three-dimensional cone-beam computed tomography-based virtual treatment planning and fabrication of a surgical splint for asymmetric patients: surgery first approach. Am J Orthod Dentofac Orthop 144(5):748–758CrossRef
26.
Wang D, Zhang Y, Hou J, Wang Y, Lv P, Chen Y, Zhao H (2012) iDental: a haptic-based dental simulator and its preliminary user evaluation. IEEE Trans Haptics 5(4):332–343CrossRef
27.
Wang D, Zhang Y, Wang Y, Lee YS, Lu P, Wang Y (2005) Cutting on triangle mesh: local model-based haptic display for dental preparation surgery simulation. IEEE Trans Vis Comput Graph 11(6):671–683CrossRefPubMed
28.
Wang Q, Chen H, Wu W, Qin J, Heng PA (2012) Impulse-based rendering methods for haptic simulation of bone-burring. IEEE Trans Haptics 5(4):344–355CrossRef
29.
Wu W, Cen Y, Hong Y, Keeling A, Khambay B (2016) A pilot study to assess the feasibility and accuracy of using haptic technology to occlude digital dental models. J Dent 46:54–60CrossRefPubMed
30.
Xia P, Lopes AM, Restivo MT (2013) Virtual reality and haptics for dental surgery: a personal review. Vis Comput 29(5):433–447CrossRef
31.
Zheng F, Lu WF, Wong YS, Foong KWC (2012) An analytical drilling force model and GPU-accelerated haptics-based simulation framework of the pilot drilling procedure for micro-implants surgery training. Comput Methods Progr Biomed 108(3):1170–1184CrossRef
Metadata
Title
Haptic simulation framework for determining virtual dental occlusion
Authors
Wen Wu
Hui Chen
Yuhai Cen
Yang Hong
Balvinder Khambay
Pheng Ann Heng
Publication date
01-04-2017
Publisher
Springer International Publishing
Published in
International Journal of Computer Assisted Radiology and Surgery / Issue 4/2017
Print ISSN: 1861-6410
Electronic ISSN: 1861-6429
DOI
https://doi.org/10.1007/s11548-016-1475-3

Other articles of this Issue 4/2017

International Journal of Computer Assisted Radiology and Surgery 4/2017 Go to the issue

Original Article

Integrating CAD modules in a PACS environment using a wide computing infrastructure

Original Article

Improved electromagnetic tracking for catheter path reconstruction with application in high-dose-rate brachytherapy

Original Article

Three-dimensional texture features from intensity and high-order derivative maps for the discrimination between bladder tumors and wall tissues via MRI

Original Article

The impact of manual threshold selection in medical additive manufacturing

Original Article

A CAD of fully automated colonic polyp detection for contrasted and non-contrasted CT scans

Original Article

Computer-assisted delineation of cerebral infarct from diffusion-weighted MRI using Gaussian mixture model