Skip to main content
Top
Literature
1.
go back to reference Liacouras P, Garnes J, Roman N, Petrich A, Grant GT (2011) Designing and manufacturing an auricular prosthesis using computed tomography, 3-dimensional photographic imaging, and additive manufacturing: a clinical report. J Prosthet Dent 105(2):78–82CrossRefPubMed Liacouras P, Garnes J, Roman N, Petrich A, Grant GT (2011) Designing and manufacturing an auricular prosthesis using computed tomography, 3-dimensional photographic imaging, and additive manufacturing: a clinical report. J Prosthet Dent 105(2):78–82CrossRefPubMed
2.
go back to reference Subburaj K, Nair C, Rajesh S, Meshram SM, Ravi B (2007) Rapid development of auricular prosthesis using CAD and rapid prototyping technologies. Int J Oral Maxillofac Surg 36(10):938–943CrossRefPubMed Subburaj K, Nair C, Rajesh S, Meshram SM, Ravi B (2007) Rapid development of auricular prosthesis using CAD and rapid prototyping technologies. Int J Oral Maxillofac Surg 36(10):938–943CrossRefPubMed
3.
go back to reference Ciocca L, Scotti R (2004) CAD–CAM-generated ear cast by means of a laser scanner and rapid prototyping machine. J Prosthet Dent 92(6):591–595CrossRefPubMed Ciocca L, Scotti R (2004) CAD–CAM-generated ear cast by means of a laser scanner and rapid prototyping machine. J Prosthet Dent 92(6):591–595CrossRefPubMed
4.
go back to reference Tsuji M, Noguchi N, Ihara K, Yamashita Y, Shikimori M, Goto M (2004) Fabrication of a maxillofacial prosthesis using a computer-aided design and manufacturing system. J Prosthodont 13(3):179–183CrossRefPubMed Tsuji M, Noguchi N, Ihara K, Yamashita Y, Shikimori M, Goto M (2004) Fabrication of a maxillofacial prosthesis using a computer-aided design and manufacturing system. J Prosthodont 13(3):179–183CrossRefPubMed
5.
go back to reference Ciocca L, Mingucci R, Gassino G, Scotti R (2007) CAD/CAM ear model and virtual construction of the mold. J Prosthet Dent 98(5):339–343CrossRefPubMed Ciocca L, Mingucci R, Gassino G, Scotti R (2007) CAD/CAM ear model and virtual construction of the mold. J Prosthet Dent 98(5):339–343CrossRefPubMed
Metadata
Title
Digital fabrication of orbital prosthesis mold using 3D photography and computer-aided design
Publication date
01-02-2017
Published in
Graefe's Archive for Clinical and Experimental Ophthalmology / Issue 2/2017
Print ISSN: 0721-832X
Electronic ISSN: 1435-702X
DOI
https://doi.org/10.1007/s00417-016-3544-2

Other articles of this Issue 2/2017

Graefe's Archive for Clinical and Experimental Ophthalmology 2/2017 Go to the issue