Skip to main content
Top
Published in: International Orthopaedics 4/2013

01-04-2013 | Original Paper

Oxidative properties and surface damage mechanisms of remelted highly crosslinked polyethylenes in total knee arthroplasty

Authors: Daniel W. MacDonald, Genymphas Higgs, Javad Parvizi, Gregg Klein, Mark Hartzband, Harlan Levine, Matthew Kraay, Clare M. Rimnac, Steven M. Kurtz

Published in: International Orthopaedics | Issue 4/2013

Login to get access

Abstract

Purpose

Remelted highly crosslinked polyethylenes (HXLPEs) were introduced in total knee replacement (TKR) starting in 2001 to reduce wear and particle-induced lysis. The purpose of this study was to investigate the damage mechanisms and oxidative stability of remelted HXLPEs used in TKR.

Methods

A total of 186 posteriorly stabilised tibial components were retrieved at consecutive revision operations. Sixty nine components were identified as remelted HXLPE. The conventional inserts were implanted for 3.4 ± 2.7 years, while the remelted components were implanted 1.4 ± 1.2 years. Oxidation was assessed using Fourier transform infrared spectroscopy.

Results

Remelted HXLPE inserts exhibited lower oxidation indices compared to conventional inserts. We were able to detect slight regional differences within the HXLPE cohort, specifically at the bearing surface.

Conclusion

Remelted HXLPE was effective at reducing oxidation in comparison to gamma inert sterilised controls. Additional long-term HXLPE retrievals are necessary to ascertain the long term in vivo stability of these materials in TKR.
Literature
1.
go back to reference Kurtz SM (2009) UHMWPE biomaterials handbook: ultra-high molecular weight polyethylene in total joint replacement and medical devices, 2nd edn. Academic, Burlington Kurtz SM (2009) UHMWPE biomaterials handbook: ultra-high molecular weight polyethylene in total joint replacement and medical devices, 2nd edn. Academic, Burlington
3.
go back to reference Baker DA, Bellare A, Pruitt L (2003) The effects of degree of crosslinking on the fatigue crack initiation and propagation resistance of orthopedic-grade polyethylene. J Biomed Mater Res A 66:146–154. doi:10.1002/jbm.a.10606 PubMedCrossRef Baker DA, Bellare A, Pruitt L (2003) The effects of degree of crosslinking on the fatigue crack initiation and propagation resistance of orthopedic-grade polyethylene. J Biomed Mater Res A 66:146–154. doi:10.​1002/​jbm.​a.​10606 PubMedCrossRef
4.
go back to reference Huot JC, Van Citters DW, Currier JH, Currier BH, Mayor MB, Collier JP (2010) Evaluating the suitability of highly cross-linked and remelted materials for use in posterior stabilized knees. J Biomed Mater Res B Appl Biomater 95:298–307. doi:10.1002/jbm.b.31714 PubMed Huot JC, Van Citters DW, Currier JH, Currier BH, Mayor MB, Collier JP (2010) Evaluating the suitability of highly cross-linked and remelted materials for use in posterior stabilized knees. J Biomed Mater Res B Appl Biomater 95:298–307. doi:10.​1002/​jbm.​b.​31714 PubMed
5.
go back to reference Jasty M, Rubash HE, Muratoglu O (2005) Highly cross-linked polyethylene: the debate is over–in the affirmative. J Arthroplasty 20:55–58PubMedCrossRef Jasty M, Rubash HE, Muratoglu O (2005) Highly cross-linked polyethylene: the debate is over–in the affirmative. J Arthroplasty 20:55–58PubMedCrossRef
6.
go back to reference Ries MD (2005) Highly cross-linked polyethylene: the debate is over–in opposition. J Arthroplasty 20:59–62PubMedCrossRef Ries MD (2005) Highly cross-linked polyethylene: the debate is over–in opposition. J Arthroplasty 20:59–62PubMedCrossRef
8.
go back to reference Willie BM, Foot LJ, Prall MW, Bloebaum RD (2008) Surface damage analysis of retrieved highly crosslinked polyethylene tibial components after short-term implantation. J Biomed Mater Res B Appl Biomater 85:114–124. doi:10.1002/jbm.b.30923 PubMed Willie BM, Foot LJ, Prall MW, Bloebaum RD (2008) Surface damage analysis of retrieved highly crosslinked polyethylene tibial components after short-term implantation. J Biomed Mater Res B Appl Biomater 85:114–124. doi:10.​1002/​jbm.​b.​30923 PubMed
10.
12.
go back to reference Macdonald D, Sakona A, Ianuzzi A, Rimnac CM, Kurtz SM (2010) Do first-generation highly crosslinked polyethylenes oxidize in vivo? Clin Orthop Relat Res. doi:10.1007/s11999-010-1728-3 Macdonald D, Sakona A, Ianuzzi A, Rimnac CM, Kurtz SM (2010) Do first-generation highly crosslinked polyethylenes oxidize in vivo? Clin Orthop Relat Res. doi:10.​1007/​s11999-010-1728-3
15.
go back to reference Lewis G (1997) Polyethylene wear in total hip and knee arthroplasties. J Biomed Mater Res 38:55–75PubMedCrossRef Lewis G (1997) Polyethylene wear in total hip and knee arthroplasties. J Biomed Mater Res 38:55–75PubMedCrossRef
17.
go back to reference Cornwall GB, Hansson CM, Bowe AJ, Bryant JT (1997) Surface degradation features and microstructural properties of ultra-high molecular weight polyethylene (UHMWPe). J Mater Sci Mater Med 8:303–309PubMedCrossRef Cornwall GB, Hansson CM, Bowe AJ, Bryant JT (1997) Surface degradation features and microstructural properties of ultra-high molecular weight polyethylene (UHMWPe). J Mater Sci Mater Med 8:303–309PubMedCrossRef
Metadata
Title
Oxidative properties and surface damage mechanisms of remelted highly crosslinked polyethylenes in total knee arthroplasty
Authors
Daniel W. MacDonald
Genymphas Higgs
Javad Parvizi
Gregg Klein
Mark Hartzband
Harlan Levine
Matthew Kraay
Clare M. Rimnac
Steven M. Kurtz
Publication date
01-04-2013
Publisher
Springer-Verlag
Published in
International Orthopaedics / Issue 4/2013
Print ISSN: 0341-2695
Electronic ISSN: 1432-5195
DOI
https://doi.org/10.1007/s00264-013-1796-6

Other articles of this Issue 4/2013

International Orthopaedics 4/2013 Go to the issue