Skip to main content
Key Specialties
Cardiology Diabetology Endocrinology Gastroenterology Geriatrics and Gerontology Gynecology and Obstetrics Hematology Infectious Disease Internal Medicine Nephrology Neurology Oncology Pediatrics Respiratory Medicine Rheumatology Surgery
Congress Coverage
2024 ACC Congress 2023 ESMO Congress 2023 EASD Congress 2023 ERS Congress 2023 ESC Congress 2023 EHA Congress 2023 ASCO Annual Meeting
Clinical Collections
Advances in Alzheimer’s

At a glance: The ONWARDS insulin icodec trials

A round-up of the ONWARDS phase 3 clinical trials evaluating the novel weekly insulin icodec in people with diabetes.
ADVANCED SEARCH
Log in
Top
International Orthopaedics
Published in: International Orthopaedics 5/2011

01-05-2011 | Original Paper

The utility of digital templating in Total Hip Arthroplasty with Crowe type II and III dysplastic hips

Authors: Xin Zhao, Zhen-An Zhu, Jie Zhao, Mao-Qiang Li, Gang Wang, De-Gang Yu, Bo Yu

Published in: International Orthopaedics | Issue 5/2011

Login to get access

Abstract

With the superiority of digital imaging, conventional preoperative acetate templating is gradually being replaced by digital templating in total hip arthroplasty (THA). The purpose of this study was to assess the utility of digital templating for patients with Crowe type II and III dysplastic hips. In this study, 41 THA patients with Crowe type II or III dysplastic hips and 48 THA patients with other primary diseases were retrospectively reviewed. All patients were fitted with cementless prostheses in 2008. For the THA patients with dysplastic hips, we attempted to restore their hip centres to the position of the true acetabulum. Digital templating was the method chosen to achieve hip centre restoration. The prosthesis prediction accuracy (within ± one size using digital templating) was 20 (48.8%) for the cup size and 30 (73.2%) for the stem size. Meanwhile, for patients with other primary diseases, the accuracy for the cup size within ± one size was 34 (70.8%) and for the stem size accuracy was within ± one size in 38 (79.2%). Between the two patient groups, there was a significant difference in the predicted cup size. In patients with dysplastic hips, the low accuracy of the predicted cup size may have resulted from difficulty in predicting the vertical location of the hip centre. Despite this limitation, preoperative planning using digital templating is a convenient technique for THA patients with Crowe type II and III dysplastic hips.
Literature
1.
Argenson JN, Flecher X, Parratte S, Aubaniac JM, Jean-Noel A (2007) Anatomy of the dysplastic hip and consequences for total hip arthroplasty. Clin Orthop Relat Res 465:40–45PubMed
2.
Bicanic G, Delimar D, Delimar M, Pecina M (2009) Influence of the acetabular cup position on hip load during arthroplasty in hip dysplasia. Int Orthop 33(2):397–402PubMedCrossRef
3.
Crooijmans HJ, Laumen AM, van Pul C, van Mourik JB (2009) A new digital preoperative planning method for total hip arthroplasties. Clin Orthop Relat Res 467:909–916PubMedCrossRef
4.
Crowe JF, Mani VJ, Ranawat CS (1979) Total hip replacement in congenital dislocation and dysplasia of the hip. J Bone Joint Surg Am 61(1):15–23PubMed
5.
Davila JA, Kransdorf MJ, Duffy GP (2006) Surgical planning of total hip arthroplasty: accuracy of computer-assisted EndoMap software in predicting component size. Skeletal Radiol 35:390–393PubMedCrossRef
6.
Delimar D, Cicak N, Klobucar H, Pecina M, Korzinek K (2002) Acetabular roof reconstruction with pedicled iliac graft. Int Orthop 26:344–348PubMedCrossRef
7.
Dorr LD, Tawakkol S, Moorthy M, Long W, Wan Z (1999) Medial protrusio technique for placement of a porous-coated, hemispherical acetabular component without cement in a total hip arthroplasty in patients who have acetabular dysplasia. J Bone Joint Surg Am 81(1):83–92PubMed
8.
Flecher X, Parratte S, Brassart N, Aubaniac JM, Argenson JN (2008) Evaluation of the hip center in total hip arthroplasty for old developmental dysplasia. J Arthroplasty 23(8):1189–1196PubMedCrossRef
9.
10.
González Della Valle A, Comba F, Taveras N, Salvati EA (2008) The utility and precision of analogue and digital preoperative planning for total hip arthroplasty. Int Orthop 32:289–294PubMedCrossRef
11.
Hirakawa K, Mitsugi N, Koshino T, Saito T, Hirasawa Y, Kubo T (2001) Effect of acetabular cup position and orientation in cemented total hip arthroplasty. Clin Orthop Relat Res 388:135–142PubMedCrossRef
12.
Iorio R, Siegel J, Specht LM, Tilzey JF, Hartman A, Healy WL (2009) A comparison of acetate vs digital templating for preoperative planning of total hip arthroplasty: is digital templating accurate and safe? J Arthroplasty 24(2):175–179PubMedCrossRef
13.
Kim YH, Kim JS (2005) Total hip arthroplasty in adult patients who had developmental dysplasia of the hip. J Arthroplasty 20:1029–1036PubMedCrossRef
14.
Kosashvili Y, Shasha N, Olschewski E, Safir O, White L, Gross A, Backstein D (2009) Digital versus conventional templating techniques in preoperative planning for total hip arthroplasty. Can J Surg 52(1):6–11PubMed
15.
Pagnano W, Hanssen AD, Lewallen DG, Shaughnessy WJ (1996) The effect of superior placement of the acetabular component on the rate of loosening after total hip arthroplasty. J Bone Joint Surg Am 78(7):1004–1014PubMed
16.
Papachristou G, Hatzigrigoris P, Panousis K, Plessas S, Sourlas J, Levidiotis C, Chronopoulos E (2006) Total hip arthroplasty for developmental hip dysplasia. Int Orthop 30:21–25PubMedCrossRef
17.
Somford MP, Bolder SB, Gardeniers JW, Slooff TJ, Schreurs BW (2008) Favorable survival of acetabular reconstruction with bone impaction grafting in dysplastic hips. Clin Orthop Relat Res 466(2):359–365PubMedCrossRef
18.
Stans AA, Pagnano MW, Shaughnessy WJ, Hanssen AD (1998) Results of total hip arthroplasty for Crowe 3 type developmental hip dysplasia. Clin Orthop Relat Res 348:149–157PubMedCrossRef
19.
The B, Diercks RL, van Ooijen PM, van Horn JR (2005) Comparison of analog and digital preoperative planning in total hip and knee arthroplasties. Acta Orthop 76(1):78–84PubMedCrossRef
20.
Unnanuntana A, Wagner D, Goodman SB (2009) The accuracy of preoperative templating in cementless total hip arthroplasty. J Arthroplasty 24(2):180–186PubMedCrossRef
21.
Zhen’an Z, Kerong D, Yuehua S, Jian T, You W, Yongqiang C, Dingwei S (2004) Total hip replacement for congenital hip dysplasia. Shanghai Medical Journal 27(2):81–82
Metadata
Title
The utility of digital templating in Total Hip Arthroplasty with Crowe type II and III dysplastic hips
Authors
Xin Zhao
Zhen-An Zhu
Jie Zhao
Mao-Qiang Li
Gang Wang
De-Gang Yu
Bo Yu
Publication date
01-05-2011
Publisher
Springer-Verlag
Published in
International Orthopaedics / Issue 5/2011
Print ISSN: 0341-2695
Electronic ISSN: 1432-5195
DOI
https://doi.org/10.1007/s00264-010-0991-y

Other articles of this Issue 5/2011

International Orthopaedics 5/2011 Go to the issue

Letter to the Editor

Cerclage cable in fracture: frustration or necessity?

Original Paper

Poor performance of microbiological sampling in the prediction of recurrent arthroplasty infection

Original Paper

Total hip replacement in congenital high hip dislocation following iliofemoral monotube distraction

Original Paper

Surgical treatment of bone metastases in patients with lung cancer

Original Paper

Efficiency of iloprost treatment for osseous malperfusion

Original Paper

Kashin Beck Disease: more than just osteoarthrosis