Top

Published in:

01-02-2021 | Bleaching | Original Article

Optical changes of human dentin after non-vital bleaching and effect of Er,Cr:YSGG laser on micro-shear bond strength of a self-etch and an etch-and-rinse adhesive system

Authors: İzgen Karakaya, Tağmaç Özberk

Published in: Lasers in Medical Science | Issue 1/2021

Abstract

The aim was to evaluate the optical changes of bleached human dentin and the efficacy of Er,Cr:YSGG laser on micro-shear bond strength (μSBS) of two adhesive systems for immediate and delayed applications. Seventy-two human dentin specimens (1 mm) were obtained. Colour measurements of 30 specimens (control and bleaching groups) were made at baseline, after bleaching and a 7-day delay. Differences at colour (ΔE₀₀), translucency (ΔTP₀₀) and whiteness (ΔWI_D) were calculated by recorded data. Forty-two specimens were used to compare μSBS of a self-etch (Clearfil SE Bond [SE]) and an etch-and-rinse (Prime&Bond NT [PBNT]) adhesive to bleached dentin. Additional to a negative group, six groups were contemplated for each adhesive, considering the time of composite application (immediate, delayed) and whether additional surface treatment by laser (1 W, 2 W) or not. Colour and μSBS data were statistically analysed. For optical analysis, only ΔE₀₀ and ΔWI_D calculated for the difference between baseline and bleaching were found significantly different for control and bleaching groups. Whiteness of bleached specimens was remarkably decreased after a 7-day delay. Despite immediate applications of SE showing lower μSBS than negative control, delayed applications showed no significant differences except that of the 2 W laser etching. For PBNT, laser etching increased μSBS for both of the immediate and delayed applications, and no significant difference was observed from negative control. Related with the preferred adhesive system, Er,Cr:YSGG laser etching can be an alternative for optimal bond strength of immediate restorations, but the clinicians should always keep in mind that perceived colour and whiteness will change by the passing time which can affect the shade match.

Lajnert V, Kovacevic Pavicic D, Pavlic A, Pokrajac-Bulian A, Spalj S (2018) Smile aesthetics satisfaction scale: development and validation of a new brief five-item measure of satisfaction with smile aesthetics in adults and the elderly. Int Dent J 68(3):162–170PubMed

Alqahtani MQ (2014) Tooth-bleaching procedures and their controversial effects: a literature review. Saudi Dent J 26(2):33–46PubMedPubMedCentral

Kwon SR, Wertz PW (2015) Review of the mechanism of tooth whitening. J Esthet Restor Dent 27(5):240–257PubMed

Zimmerli B, Strub M, Jeger F, Stadler O, Lussi A (2010) Composite materials: composition, properties and clinical applications. A literature review. Schweiz Monatsschr Zahnmed 120(11):972–986PubMed

Elfallah HM, Bertassoni LE, Charadram N, Rathsam C, Swain MV (2015) Effect of tooth bleaching agents on protein content and mechanical properties of dental enamel. Acta Biomater 20:120–128PubMed

Kwon SR (2016) A dynamic process: elucidating the mechanism of tooth whitening. Journal of Cosmetic Dentistry 32(2):94–101

Cavalli V, Ries AF, Giannini M, Ambrosano GM (2001) The effect of elapsed time following bleaching on enamel bond strength of resin composite. Oper Dent 26(6):597–602PubMed

Yu H, Zhang CY, Cheng SL, Cheng H (2015) Effects of bleaching agents on dental restorative materials: a review of the literature and recommendation to dental practitioners and researchers. J Dent Sci 10(4):345–351

Żukowski P, Maciejczyk M, Waszkiel D (2018) Sources of free radicals and oxidative stress in the oral cavity. Arch Oral Biol 92:8–17PubMed

10.

Santos CRD, Tonetto MR, Presoto CD, Bandeca MC, Oliviera OB Jr, Calabrez-Filho S (2012) Application of Er: YAG and ER, Cr: YSGG lasers in cavity preparation for dental tissues: a literature review. World J Dent 3(4):340–343

11.

Ansari ZJ, Fekrazad R, Feizi S, Younessian F, Kalhori KA, Gutknecht N (2012) The effect of an Er, Cr: YSGG laser on the micro-shear bond strength of composite to the enamel and dentin of human permanent teeth. Lasers Med Sci 27(4):761–765

12.

Zhang Y, Jiang A (2020) The influence of Er: YAG laser treatment on the shear bond strength of enamel and dentin: a systematic review and meta-analysis. Quintessence Int 51(1):8–16PubMed

13.

Kiomarsi N, Arjmand Y, Fard MJK, Chiniforush N (2018) Effects of erbium family laser on shear bond strength of composite to dentin after internal bleaching. J Lasers Med Sci 9(1):58–62PubMed

14.

Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M et al (2015) Color difference thresholds in dentistry. J Esthet Restor Dent 27:S1–S9PubMed

15.

Pecho OE, Ghinea R, Alessandretti R, Pérez MM, Della Bona A (2016) Visual and instrumental shade matching using CIELAB and CIEDE2000 color difference formulas. Dent Mater 32(1):82–92PubMed

16.

Salas M, Lucena C, Herrera LJ, Yebra A, Della Bona A, Pérez MM (2018) Translucency thresholds for dental materials. Dent Mater 34(8):1168–1174PubMed

17.

Pérez MM, Ghinea R, Rivas MJ, Yebra A, Ionescu AM, Paravina RD, Herrera LJ (2016) Development of a customized whiteness index for dentistry based on CIELAB color space. Dent Mater 32(3):461–467

18.

Pérez MM, Herrera LJ, Carrillo F, Pecho OE, Dudea D, Gasparik C et al (2019) Whiteness difference thresholds in dentistry. Dent Mater 35(2):292–297PubMed

19.

Caneppele TM, Borges AB, Torres CR (2013) Effects of dental bleaching on the color, translucency and fluorescence properties of enamel and dentin. Eur J Esthet Dent 8:200–212PubMed

20.

Nakajima M, Arimoto A, Prasansuttiporn T, Thanatvarakorn O, Foxton RM, Tagami J (2012) Light transmission characteristics of dentine and resin composites with different thickness. J Dent 40:e77–e82PubMed

21.

Pop-Ciutrila IS, Ghinea R, Colosi HA, Dudea D (2016) Dentin translucency and color evaluation in human incisors, canines, and molars. J Prosthet Dent 115(4):475–481PubMed

22.

Vieira GF, Arakaki Y, Caneppele TMF (2008) Spectrophotometric assessment of the effects of 10% carbamide peroxide on enamel translucency. Braz Oral Res 22(1):90–95PubMed

23.

Ma X, Li R, Sa Y, Liang S, Sun L, Jiang T, Wang Y (2011) Separate contribution of enamel and dentine to overall tooth colour change in tooth bleaching. J Dent 39(11):739–745PubMed

24.

Suliman S, Sulaiman TA, Olafsson VG, Delgado AJ, Donovan TE, Heymann HO (2019) Effect of time on tooth dehydration and rehydration. J Esthet Restor Dent 31(2):118–123PubMed

25.

Ten Bosch JJ, Coops JC (1995) Tooth color and reflectance as related to light scattering and enamel hardness. J Dent Res 74(1):374–380PubMed

26.

Wiegand A, Vollmer D, Foitzik M, Attin R, Attin T (2005) Efficacy of different whitening modalities on bovine enamel and dentin. Clin Oral Invest 9(2):91–97

27.

Kugel G, Petkevis J, Gurgan S, Doherty E (2007) Separate whitening effects on enamel and dentin after fourteen days. J Endod 33(1):34–37PubMed

28.

Ma X, Jiang T, Sun L, Wang Z, Zhou Y, Wang Y (2009) Effects of tooth bleaching on the color and translucency properties of enamel. Am J Dent 22(6):324–328PubMed

29.

Wei J, Wang Y, Li Q (2016) Spectroradiometric and chemical analysis of severely discolored endodontically treated teeth. Oper Dent 41(4):370–378PubMed

30.

Naughton WT, Latta MA (2005) Bond strength of composite to dentin using self-etching adhesive systems. Quintessence Int 36(4):259–262PubMed

31.

Paryab M, Sharifi S, Kharazifard MJ, Kumarci N (2019) Cavity preparation by laser in primary teeth: effect of 2 levels of energy output on the shear bond strength of composite restoration to dentin. J Lasers Med Sci 10(3):235–240PubMed

32.

Wang R, Shi Y, Li T, Pan Y, Cui Y, Xia W (2017) Adhesive interfacial characteristics and the related bonding performance of four self-etching adhesives with different functional monomers applied to dentin. J Dent 62:72–80PubMed

33.

Van Landuyt KL, Yoshida Y, Hirata I, Snauwaert J, De Munck J, Okazaki M et al (2008) Influence of the chemical structure of functional monomers on their adhesive performance. J Dent Res 87(8):757–761PubMed

34.

Marghalani HY, Bakhsh T, Sadr A, Tagami J (2015) Ultramorphological assessment of dentin-resin interface after use of simplified adhesives. Oper Dent 40(1):E28–E39PubMed

35.

Tay FR, Moulding KM, Pashley DH (1999) Distribution of nanofillers from a simplified-step adhesive in acid-conditioned dentin. J Adhes Dent 1(2):103–117PubMed

36.

Takamizawa T, Barkmeier WW, Tsujimoto A, Berry TP, Watanabe H, Erickson RL et al (2016) Influence of different etching modes on bond strength and fatigue strength to dentin using universal adhesive systems. Dent Mater 32(2):e9–e21PubMed

37.

Hanabusa M, Mine A, Kuboki T, Momoi Y, Van Ende A, Van Meerbeek B, De Munck J (2012) Bonding effectiveness of a new ‘multi-mode’ adhesive to enamel and dentine. J Dent 40(6):475–484PubMed

38.

De Munck J, Van Meerbeek B, Yudhira R, Lambrechts P, Vanherle G (2002) Micro-tensile bond strength of two adhesives to erbium: YAG-lased vs. bur-cut enamel and dentin. Eur J Oral Sci 110(4):322–329PubMed

39.

Torres CP, Gomes-Silva JM, Borsatto MC, Barroso JM, Pécora JD, Palma-Dibb RG (2009) Shear bond strength of self-etching and total-etch adhesive systems to Er: YAG laser-irradiated primary dentin. J Dent Child 76(1):67–73

40.

Ayar MK, Erdermir F (2018) Bonding strength of universal adhesives to Er, Cr: YSGG laser-irradiated dentin. Niger J Clin 21(1):93–98

41.

Kucukyilmaz E, Botsali MS, Korkut E, Sener Y, Sari T (2017) Effect of different modes of erbium: yttrium aluminum garnet laser on shear bond strength to dentin. Niger J Clin 20(11):1277–1282

42.

Davari A, Sadeghi M, Bakhshi H (2013) Shear bond strength of an etch-and-rinse adhesive to Er: YAG laser-and/or phosphoric acid-treated dentin. J Dent Res, Dent Clin Dent Prospects 7(2):67–73

43.

Braz R, Cordeiro-Loretto S, de Castro-Lyra V, Arine M, Dantas DC, Ribeiro AIA et al (2012) Effect of bleaching on shear bond strength to dentin of etch-and-rinse and self-etching primer adhesives. Acta Odontol Latinoam 25(1):20–26PubMed

Title: Optical changes of human dentin after non-vital bleaching and effect of Er,Cr:YSGG laser on micro-shear bond strength of a self-etch and an etch-and-rinse adhesive system
Authors: İzgen Karakaya
Tağmaç Özberk
Publication date: 01-02-2021
Publisher: Springer London
Keywords: Bleaching
Er,Cr:YSGG Laser
Laser
Published in: Lasers in Medical Science / Issue 1/2021
Print ISSN: 0268-8921
Electronic ISSN: 1435-604X
DOI: https://doi.org/10.1007/s10103-020-03075-2

Keynote webinar | Spotlight on medication adherence

Springer Medicine

Optical changes of human dentin after non-vital bleaching and effect of Er,Cr:YSGG laser on micro-shear bond strength of a self-etch and an etch-and-rinse adhesive system

Abstract

Keynote webinar | Spotlight on medication adherence

Springer Medicine

Abstract

Please log in to get access to this content

Other articles of this Issue 1/2021

The efficacy of fractional carbon dioxide laser combined with narrow-band ultraviolet B phototherapy for non-segmental vitiligo: a systematic review and meta-analysis

Management of peri-implantitis using a diode laser (810 nm) vs conventional treatment: a systematic review

Shear bond strength of a self-adhesive resin cement to dentin surface treated with Nd:YAG and femtosecond lasers

A meta-analysis of fractional CO2 laser combined with PRP in the treatment of acne scar

Comparison of a fractional 2940-nm Er:YAG laser and 5% amorolfine lacquer combination therapy versus a 5% amorolfine lacquer monotherapy for the treatment of onychomycosis: a randomized controlled trial

Irradiation by high-intensity red light-emitting diode enhances human bone marrow mesenchymal stem cells osteogenic differentiation and mineralization through Wnt/β-catenin signaling pathway