Skip to main content
Top
Published in: International Orthopaedics 3/2006

01-06-2006 | Original Paper

Eleven-year results of the ABG I hip replacement

Authors: W. Y. Kim, B. N. Muddu

Published in: International Orthopaedics | Issue 3/2006

Login to get access

Abstract

The ABG I uncemented hip prosthesis has demonstrated an unacceptably high failure rate and poor functional outcome in our patients. A prospective review was performed of 38 implanted hips with a mean follow-up of 11 years. Sixteen hips have been revised or are candidates for revision hip surgery, due principally to polyethylene wear and pelvic osteolysis. Contributing factors were likely to be the poor wear characteristics of the polyethylene liners—which were gamma irradiated in air—and the thinness of these liners. Of further concern were the poor pain and function scores in the remaining hips [mean Harris Hip Scores (HHS) of 70 (SD 22) at 11-year follow-up]. The influence of the surgical learning curve on clinical results may have been an important factor. Undersized femoral components were associated with poor pain and functional scores in five patients with HHS < 60. All ABG I hip implants must remain under careful, long-term review.
Literature
1.
go back to reference Blacha J (2004) High osteolysis and revision rate with the hydroxy-apatite-coated ABG hip prostheses. Acta Orthop Scand 75(3):276–282PubMedCrossRef Blacha J (2004) High osteolysis and revision rate with the hydroxy-apatite-coated ABG hip prostheses. Acta Orthop Scand 75(3):276–282PubMedCrossRef
2.
go back to reference Duffy P, Sher JL, Partington PF (2004) Premature wear and osteolysis in an HA-coated uncemented total hip arthroplasty. J Bone Joint Surg Br 86(1):34–38PubMed Duffy P, Sher JL, Partington PF (2004) Premature wear and osteolysis in an HA-coated uncemented total hip arthroplasty. J Bone Joint Surg Br 86(1):34–38PubMed
3.
go back to reference Devane PA, Bourne RB, Rorabeck CH, MacDonald S, Robinson EJ (1995) Measurement of polyethylene wear in metal-backed acetabular cups II: clinical application. Clin Orthop 319:317–326PubMed Devane PA, Bourne RB, Rorabeck CH, MacDonald S, Robinson EJ (1995) Measurement of polyethylene wear in metal-backed acetabular cups II: clinical application. Clin Orthop 319:317–326PubMed
5.
go back to reference Giannikas KA, Din R, Sadiq S, Dunningham TH (2002) Medium-term results of the ABG total hip arthroplasty in young patients. J Arthroplasty 17:184–188CrossRefPubMed Giannikas KA, Din R, Sadiq S, Dunningham TH (2002) Medium-term results of the ABG total hip arthroplasty in young patients. J Arthroplasty 17:184–188CrossRefPubMed
6.
go back to reference Huk O, Bansal M, Betts F (1994) Polyethylene and metal debris generated by non articulating surfaces of modular acetabular components. J Bone Joint Surg Br 76-B:568–574 Huk O, Bansal M, Betts F (1994) Polyethylene and metal debris generated by non articulating surfaces of modular acetabular components. J Bone Joint Surg Br 76-B:568–574
7.
go back to reference Harris H (1969) Traumatic arthritis of the hip after dislocation and acetabular fracture: treatment by mould arthroplasty: an end result study using a new method of result evaluation. J Bone Joint Surg Am 51:737–755PubMed Harris H (1969) Traumatic arthritis of the hip after dislocation and acetabular fracture: treatment by mould arthroplasty: an end result study using a new method of result evaluation. J Bone Joint Surg Am 51:737–755PubMed
8.
go back to reference Katz JN, Losina E, Barrett J et al (2001) Association between hospital and surgeon procedure volume and outcomes of total hip replacement in the United States Medicare population. J Bone Joint Surg Am 83:1622–1629CrossRefPubMed Katz JN, Losina E, Barrett J et al (2001) Association between hospital and surgeon procedure volume and outcomes of total hip replacement in the United States Medicare population. J Bone Joint Surg Am 83:1622–1629CrossRefPubMed
11.
go back to reference Sutula LC, Collier JP, Saum KA et al (1995) Impact of gamma sterilization on clinical performance of polyethylene in the hip. Clin Orthop 319:28–40PubMed Sutula LC, Collier JP, Saum KA et al (1995) Impact of gamma sterilization on clinical performance of polyethylene in the hip. Clin Orthop 319:28–40PubMed
12.
go back to reference Shih CH, Lee PC, Chen JH et al (1997) Measurement of polyethylene wear in cementless total hip arthroplasty. J Bone Joint Surg Br 79B:361–365CrossRef Shih CH, Lee PC, Chen JH et al (1997) Measurement of polyethylene wear in cementless total hip arthroplasty. J Bone Joint Surg Br 79B:361–365CrossRef
Metadata
Title
Eleven-year results of the ABG I hip replacement
Authors
W. Y. Kim
B. N. Muddu
Publication date
01-06-2006
Publisher
Springer-Verlag
Published in
International Orthopaedics / Issue 3/2006
Print ISSN: 0341-2695
Electronic ISSN: 1432-5195
DOI
https://doi.org/10.1007/s00264-006-0075-1

Other articles of this Issue 3/2006

International Orthopaedics 3/2006 Go to the issue

Letter to the Editor

Comment to Pecina et al.