Skip to main content
Top
Published in: BMC Oral Health 1/2023

Open Access 01-12-2023 | Research

In vitro evaluation of dental color stability using various aesthetic restorative materials after immersion in different drinks

Authors: Tavga Mustafa Faris, Rukhosh Hasan Abdulrahim, Mohammed Abdalla Mahmood, Gollshang Ahmad Mhammed Dalloo, Sarhang Sarwat Gul

Published in: BMC Oral Health | Issue 1/2023

Login to get access

Abstract

Background

Currently, the demands for restorations have increased considerably; thus, improvements and modifications have been made in dental composite technologies especially using materials that have been claimed to improve color stability.

Objective

This study aimed to determine the effect of various solutions on the color stability of different restorative materials in vitro study.

Methods

This study used three types of esthetic restorative materials. The samples comprised 45 discs, including 15 micro-hybrids, 15 nano-hybrids, and 15 glass ionomers). These discs were immersed in various beverages an hour a day for one month at room temperature. The color stability was measured using a spectrophotometer before/after immersion (days 7 and 30).

Results

We realized a significant difference in color change with Coca-Cola and tea-milk solution after seven days and 30 days (p < 0.05). However, no significant difference was found in the samples immersed in DM after seven days and 30 days (p > 0.05). The highest value of lightness (∆L) and stainability (∆a) was seen in micro-hybrid after 30 days of immersion in tea-milk solution (− 12.16 ± 1.74 and 11.4 ± 3.82, respectively), while most samples had a positive ∆b value.

Conclusion

After one month, the tea-milk solution affected the color stability of all used restorative materials. In addition, micro-hybrid had higher color stability than nano-hybrid and glass ionomer.
Literature
1.
go back to reference Yadav R, Meena A, Patnaik A. Biomaterials for dental composite applications: a comprehensive review of physical, chemical, mechanical, thermal, tribological, and biological properties. Polym Adv Technol. 2022;33(6):1762–81.CrossRef Yadav R, Meena A, Patnaik A. Biomaterials for dental composite applications: a comprehensive review of physical, chemical, mechanical, thermal, tribological, and biological properties. Polym Adv Technol. 2022;33(6):1762–81.CrossRef
2.
go back to reference Yadav R, Kumar M. Dental restorative composite materials: a review. J Oral Biosci. 2019;61(2):78–83.CrossRef Yadav R, Kumar M. Dental restorative composite materials: a review. J Oral Biosci. 2019;61(2):78–83.CrossRef
3.
go back to reference Pratap B, Gupta RK, Bhardwaj B, Nag M. Resin based restorative dental materials: characteristics and future perspectives. Jpn Dental Sci Rev. 2019;55(1):126–38.CrossRef Pratap B, Gupta RK, Bhardwaj B, Nag M. Resin based restorative dental materials: characteristics and future perspectives. Jpn Dental Sci Rev. 2019;55(1):126–38.CrossRef
4.
go back to reference Choi J-W, Lee M-J, Oh S-H, Kim K-M. Changes in the physical properties and color stability of aesthetic restorative materials caused by various beverages. Dent Mater J. 2019;38(1):33–40.CrossRef Choi J-W, Lee M-J, Oh S-H, Kim K-M. Changes in the physical properties and color stability of aesthetic restorative materials caused by various beverages. Dent Mater J. 2019;38(1):33–40.CrossRef
5.
go back to reference Yap A, Mok B. Surface finish of a new hybrid aesthetic restorative material. Oper Dent. 2002;27(2):161–6. Yap A, Mok B. Surface finish of a new hybrid aesthetic restorative material. Oper Dent. 2002;27(2):161–6.
6.
go back to reference Tanthanuch S, Kukiattrakoon B, Eiam-O-Pas K, Pokawattana K, Pamanee N, Thongkamkaew W, et al. Surface changes of various bulk-fill resin-based composites after exposure to different food-simulating liquid and beverages. J Esthet Restor Dent. 2018;30(2):126–35.CrossRef Tanthanuch S, Kukiattrakoon B, Eiam-O-Pas K, Pokawattana K, Pamanee N, Thongkamkaew W, et al. Surface changes of various bulk-fill resin-based composites after exposure to different food-simulating liquid and beverages. J Esthet Restor Dent. 2018;30(2):126–35.CrossRef
7.
go back to reference Yadav R, Kumar M. Investigation of the physical, mechanical and thermal properties of nano and microsized particulate-filled dental composite material. J Compos Mater. 2020;54(19):2623–33.CrossRef Yadav R, Kumar M. Investigation of the physical, mechanical and thermal properties of nano and microsized particulate-filled dental composite material. J Compos Mater. 2020;54(19):2623–33.CrossRef
8.
go back to reference Yadav R, Lee H, Lee J-H, Singh RK, Lee H-H. A comprehensive review: physical, mechanical, and tribological characterization of dental resin composite materials. Tribol Int. 2022;179:108102.CrossRef Yadav R, Lee H, Lee J-H, Singh RK, Lee H-H. A comprehensive review: physical, mechanical, and tribological characterization of dental resin composite materials. Tribol Int. 2022;179:108102.CrossRef
9.
go back to reference Correr GM, Bruschi Alonso RC, Baratto-Filho F, Correr-Sobrinho L, Sinhoreti MAC, Puppin-Rontani RM. In vitro long-term degradation of aesthetic restorative materials in food-simulating media. Acta Odontol Scand. 2012;70(2):101–8.CrossRef Correr GM, Bruschi Alonso RC, Baratto-Filho F, Correr-Sobrinho L, Sinhoreti MAC, Puppin-Rontani RM. In vitro long-term degradation of aesthetic restorative materials in food-simulating media. Acta Odontol Scand. 2012;70(2):101–8.CrossRef
10.
go back to reference Hamouda IM. Effects of various beverages on hardness, roughness, and solubility of esthetic restorative materials. J Esthet Restor Dent. 2011;23(5):315–22.CrossRef Hamouda IM. Effects of various beverages on hardness, roughness, and solubility of esthetic restorative materials. J Esthet Restor Dent. 2011;23(5):315–22.CrossRef
11.
go back to reference Yadav R. Analytic hierarchy process-technique for order preference by similarity to ideal solution: a multi criteria decision-making technique to select the best dental restorative composite materials. Polym Compos. 2021;42(12):6867–77.CrossRef Yadav R. Analytic hierarchy process-technique for order preference by similarity to ideal solution: a multi criteria decision-making technique to select the best dental restorative composite materials. Polym Compos. 2021;42(12):6867–77.CrossRef
12.
go back to reference Browning W, Dennison J. A survey of failure modes in composite resin restorations. Oper Dent. 1996;21:160–6. Browning W, Dennison J. A survey of failure modes in composite resin restorations. Oper Dent. 1996;21:160–6.
13.
go back to reference Erdemir U, Yıldız E, Eren MM. Effects of sports drinks on color stability of nanofilled and microhybrid composites after long-term immersion. J Dent. 2012;40:e55–63.CrossRef Erdemir U, Yıldız E, Eren MM. Effects of sports drinks on color stability of nanofilled and microhybrid composites after long-term immersion. J Dent. 2012;40:e55–63.CrossRef
14.
go back to reference Yadav R, Meena A. Comparative investigation of tribological behavior of hybrid dental restorative composite materials. Ceram Int. 2022;48(5):6698–706.CrossRef Yadav R, Meena A. Comparative investigation of tribological behavior of hybrid dental restorative composite materials. Ceram Int. 2022;48(5):6698–706.CrossRef
15.
go back to reference Yadav R. Fabrication, characterization, and optimization selection of ceramic particulate reinforced dental restorative composite materials. Polym Polym Compos. 2022;30:09673911211062755. Yadav R. Fabrication, characterization, and optimization selection of ceramic particulate reinforced dental restorative composite materials. Polym Polym Compos. 2022;30:09673911211062755.
16.
go back to reference Mitwalli H, AlSahafi R, Alhussein A, Oates TW, Melo MAS, Xu HH, et al. Novel rechargeable calcium fluoride dental nanocomposites. Dent Mater. 2022;38(2):397–408.CrossRef Mitwalli H, AlSahafi R, Alhussein A, Oates TW, Melo MAS, Xu HH, et al. Novel rechargeable calcium fluoride dental nanocomposites. Dent Mater. 2022;38(2):397–408.CrossRef
17.
go back to reference Al-Kheraif AAA, Qasim SSB, Ramakrishnaiah R, ur Rehman I. Effect of different beverages on the color stability and degree of conversion of nano and microhybrid composites. Dent Mater J. 2013;32(2):326–31.CrossRef Al-Kheraif AAA, Qasim SSB, Ramakrishnaiah R, ur Rehman I. Effect of different beverages on the color stability and degree of conversion of nano and microhybrid composites. Dent Mater J. 2013;32(2):326–31.CrossRef
18.
go back to reference Angerame D, De Biasi M. Do nanofilled/nanohybrid composites allow for better clinical performance of direct restorations than traditional microhybrid composites? A systematic review. Oper Dent. 2018;43(4):E191–209.CrossRef Angerame D, De Biasi M. Do nanofilled/nanohybrid composites allow for better clinical performance of direct restorations than traditional microhybrid composites? A systematic review. Oper Dent. 2018;43(4):E191–209.CrossRef
19.
go back to reference Yadav R, Meena A. Comparative study of thermo-mechanical and thermogravimetric characterization of hybrid dental restorative composite materials. Proc Inst Mech Eng Part L: J Mater Des Appl. 2022;236(5):1122–9. Yadav R, Meena A. Comparative study of thermo-mechanical and thermogravimetric characterization of hybrid dental restorative composite materials. Proc Inst Mech Eng Part L: J Mater Des Appl. 2022;236(5):1122–9.
20.
go back to reference Yadav R, Meena A, Patnaik A. Tribological behavior of zinc oxide-hydroxyapatite particulates filled dental restorative composite materials. Polym Compos. 2022;43:3029–40.CrossRef Yadav R, Meena A, Patnaik A. Tribological behavior of zinc oxide-hydroxyapatite particulates filled dental restorative composite materials. Polym Compos. 2022;43:3029–40.CrossRef
21.
go back to reference Yadav R, Meena A. Effect of aluminium oxide, titanium oxide, hydroxyapatite filled dental restorative composite materials on physico-mechanical properties. Ceram Int. 2022;48(14):20306–14.CrossRef Yadav R, Meena A. Effect of aluminium oxide, titanium oxide, hydroxyapatite filled dental restorative composite materials on physico-mechanical properties. Ceram Int. 2022;48(14):20306–14.CrossRef
22.
go back to reference Meena A, Bisht D, Yadav R, Saini S, Dangayach GS, Patnaik A, et al. Fabrication and characterization of micro alumina zirconia particulate filled dental restorative composite materials. Polym Compos. 2022;43(3):1526–35.CrossRef Meena A, Bisht D, Yadav R, Saini S, Dangayach GS, Patnaik A, et al. Fabrication and characterization of micro alumina zirconia particulate filled dental restorative composite materials. Polym Compos. 2022;43(3):1526–35.CrossRef
23.
go back to reference Fatima N, Abidi SYA, Jat SA. Effect of different tetra pack juices on microhardness of direct tooth colored-restorative materials. Saudi Dent J. 2013;25(1):29–32.CrossRef Fatima N, Abidi SYA, Jat SA. Effect of different tetra pack juices on microhardness of direct tooth colored-restorative materials. Saudi Dent J. 2013;25(1):29–32.CrossRef
24.
go back to reference Bahbishi N, Mzain W, Badeeb B, Nassar HMJM. Color stability and micro-hardness of bulk-fill composite materials after exposure to common beverages. Materials. 2020;13(3):787.CrossRef Bahbishi N, Mzain W, Badeeb B, Nassar HMJM. Color stability and micro-hardness of bulk-fill composite materials after exposure to common beverages. Materials. 2020;13(3):787.CrossRef
25.
go back to reference Tekçe N, Tuncer S, Demirci M, Serim ME, Baydemir C. The effect of different drinks on the color stability of different restorative materials after one month. Restor Dent Endod. 2015;40(4):255–61.CrossRef Tekçe N, Tuncer S, Demirci M, Serim ME, Baydemir C. The effect of different drinks on the color stability of different restorative materials after one month. Restor Dent Endod. 2015;40(4):255–61.CrossRef
26.
go back to reference Al-Wahab Z. An evaluation of the effect of different drinks on the color change of composan ceram composite resin (in vitro study). Mustansiria Dent J. 2009;6(1):14–9.CrossRef Al-Wahab Z. An evaluation of the effect of different drinks on the color change of composan ceram composite resin (in vitro study). Mustansiria Dent J. 2009;6(1):14–9.CrossRef
27.
go back to reference Falkensammer F, Arnetzl GV, Wildburger A, Freudenthaler J. Color stability of different composite resin materials. J Prosthet Dent. 2013;109(6):378–83.CrossRef Falkensammer F, Arnetzl GV, Wildburger A, Freudenthaler J. Color stability of different composite resin materials. J Prosthet Dent. 2013;109(6):378–83.CrossRef
28.
go back to reference Majeti C, Ravi R, Kambhampati B, Borugadda R, Athkuri S, Kakani AK. Evaluation of the color stability of two different posterior tooth colored restorative materials. F1000 Res. 2020;9(1251):1251.CrossRef Majeti C, Ravi R, Kambhampati B, Borugadda R, Athkuri S, Kakani AK. Evaluation of the color stability of two different posterior tooth colored restorative materials. F1000 Res. 2020;9(1251):1251.CrossRef
29.
go back to reference Poggio C, Beltrami R, Scribante A, Colombo M, Chiesa M. Surface discoloration of composite resins: effects of staining and bleaching. Dent Res J. 2012;9(5):567.CrossRef Poggio C, Beltrami R, Scribante A, Colombo M, Chiesa M. Surface discoloration of composite resins: effects of staining and bleaching. Dent Res J. 2012;9(5):567.CrossRef
30.
go back to reference Silva TMD, Sales ALLS, Pucci CR, Borges AB, Torres CRG. The combined effect of food-simulating solutions, brushing and staining on color stability of composite resins. Acta Biomater Odontol Scand. 2017;3(1):1–7.CrossRef Silva TMD, Sales ALLS, Pucci CR, Borges AB, Torres CRG. The combined effect of food-simulating solutions, brushing and staining on color stability of composite resins. Acta Biomater Odontol Scand. 2017;3(1):1–7.CrossRef
31.
go back to reference Garcia PPNS, Rodrigues Neto E, Santos PAD, Campos JÁDB, Dibb RGP. Influence of surface sealant on the translucency of composite resin: effect of immersion time and immersion media. Mater Res. 2008;11:193–7.CrossRef Garcia PPNS, Rodrigues Neto E, Santos PAD, Campos JÁDB, Dibb RGP. Influence of surface sealant on the translucency of composite resin: effect of immersion time and immersion media. Mater Res. 2008;11:193–7.CrossRef
32.
go back to reference Soares-Geraldo D, Scaramucci T, Steagall-Jr W, Braga SRM, Sobral MAP. Interaction between staining and degradation of a composite resin in contact with colored foods. Braz Oral Res. 2011;25:369–75.CrossRef Soares-Geraldo D, Scaramucci T, Steagall-Jr W, Braga SRM, Sobral MAP. Interaction between staining and degradation of a composite resin in contact with colored foods. Braz Oral Res. 2011;25:369–75.CrossRef
33.
go back to reference Muhittin U, Burak TU, Kam HO. Color stability of microhybrid and nanofilled composite resins: effect of surface sealant agents containing different filler content. J Contemp Dent Pract. 2019;20(9):1045–50.CrossRef Muhittin U, Burak TU, Kam HO. Color stability of microhybrid and nanofilled composite resins: effect of surface sealant agents containing different filler content. J Contemp Dent Pract. 2019;20(9):1045–50.CrossRef
34.
go back to reference Yadav R, Lee HH. Ranking and selection of dental restorative composite materials using FAHP-FTOPSIS technique: an application of multi criteria decision making technique. J Mech Behav Biomed Mater. 2022;132:105298.CrossRef Yadav R, Lee HH. Ranking and selection of dental restorative composite materials using FAHP-FTOPSIS technique: an application of multi criteria decision making technique. J Mech Behav Biomed Mater. 2022;132:105298.CrossRef
35.
go back to reference Yadav R, Lee HH. Fabrication, characterization, and selection using FAHP-TOPSIS technique of zirconia, titanium oxide, and marble dust powder filled dental restorative composite materials. Polym Adv Technol. 2022;33(10):3286–95.CrossRef Yadav R, Lee HH. Fabrication, characterization, and selection using FAHP-TOPSIS technique of zirconia, titanium oxide, and marble dust powder filled dental restorative composite materials. Polym Adv Technol. 2022;33(10):3286–95.CrossRef
Metadata
Title
In vitro evaluation of dental color stability using various aesthetic restorative materials after immersion in different drinks
Authors
Tavga Mustafa Faris
Rukhosh Hasan Abdulrahim
Mohammed Abdalla Mahmood
Gollshang Ahmad Mhammed Dalloo
Sarhang Sarwat Gul
Publication date
01-12-2023
Publisher
BioMed Central
Published in
BMC Oral Health / Issue 1/2023
Electronic ISSN: 1472-6831
DOI
https://doi.org/10.1186/s12903-023-02719-3

Other articles of this Issue 1/2023

BMC Oral Health 1/2023 Go to the issue