Top

Published in:

01-04-2010 | Original Article

In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion

Authors: Markus B. Blatz, Jin-Ho Phark, Fusun Ozer, Francis K. Mante, Najeed Saleh, Michael Bergler, Avishai Sadan

Published in: Clinical Oral Investigations | Issue 2/2010

Abstract

This study compared shear bond strengths of six self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion. One hundred twenty zirconia samples were air-abraded (group SB; n = 60) or left untreated (group NO). Composite cylinders were bonded to the zirconia samples with either BisCem (BC), Maxcem (MC), G-Cem (GC), RelyX Unicem Clicker (RUC), RelyX Unicem Applicator (RUA), or Clearfil SA Cement (CSA). Shear bond strength was tested after thermocycling, and data were analyzed with analysis of variance and Holm–Sidak pairwise comparisons. Without abrasion, RUA (8.0 MPa), GC (7.9 MPa), and CSA (7.6 MPa) revealed significantly higher bond strengths than the other cements. Air-particle abrasion increased bond strengths for all test cements (p < 0.001). GC (22.4 MPa) and CSA (18.4 MPa) revealed the highest bond strengths in group SB. Bond strengths of self-adhesive resin cements to zirconia were increased by air-particle abrasion. Cements containing adhesive monomers (MDP/4-META) were superior to other compositions.

Aboushelib MN, Kleverlaan CJ, Feilzer AJ (2007) Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia based materials. J Prosthet Dent 98:379–388CrossRefPubMed

Aboushelib MN, Matinlinna JP, Salameh Z, Ounsi H (2008) Innovations in bonding to zirconia-based materials: Part I. Dent Mater 24:1268–1272CrossRefPubMed

Atsu SS, Kilicarslan MA, Kucukesmen HC, Aka PS (2006) Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resins. J Prosthet Dent 95:430–436CrossRefPubMed

Blatz MB, Sadan A, Kern M (2003) Resin-ceramic bonding—a review of the literature. J Prosthet Dent 89:268–274CrossRefPubMed

Blatz MB, Sadan A, Maltezos C, Blatz U, Mercante D, Burgess JO (2004) In-vitro durability of the resin bond to feldspathic ceramics. Am J Dent 17:169–172PubMed

Blatz MB, Sadan A, Martin J, Lang B (2004) In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium oxide ceramic after long-term storage and thermal cycling. J Prosthet Dent 91:356–362CrossRefPubMed

Blatz MB, Chiche G, Holst S, Sadan A (2007) Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia. Quintessence Int 38:745–753PubMed

Blatz MB, Oppes S, Chiche G, Holst S, Sadan A (2008) Influence of cementation technique on fracture strength and leakage of alumina all-ceramic crowns after cyclic loading. Quintessence Int 39:23–32PubMed

Della Bona A, Donassollo TA, Demarco FF, Barrett AA, Mecholsky JJ (2007) Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic. Dent Mater 23:769–775CrossRefPubMed

10.

Denry I, Kelly JR (2008) State of the art of zirconia for dental applications. Dent Mater 24:299–307CrossRefPubMed

11.

Derand P, Derand T (2000) Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont 13:131–135PubMed

12.

Hill EE (2007) Dental Cements for definitive luting: a review and practical clinical considerations. Dent Clin N Am 643-658

13.

Kern M, Thompson VP (1995) Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J Prosthet Dent 73:240–249CrossRefPubMed

14.

Kern M, Wegner SM (1998) Bonding to zirconia ceramic: adhesion methods and durability. Dent Mater 14:64–71CrossRefPubMed

15.

Kumbuloglu O, Lassila LVJ, User A, Vallittu PK (2006) Bonding of resin composite luting cements to zirconium oxide by two air-particle abrasion methods. Oper Dent 31–2:248–255CrossRef

16.

Leung Y, Morris MD (1995) Characterization of the chemical interactions between 4-META and enamel by Raman spectroscopy. Dent Mater 11:191–195CrossRefPubMed

17.

Lohbauer U, Zipperle M, Rischka K, Petschelt A, Muller FA (2008) Hydroxylation of dental zirconia surfaces: characterization and bonding potential. J Biomed Mater Res Part B: Appl Biomater 87B:461–467CrossRef

18.

Lüthy H, Loeffel O, Hammerle CHF (2006) Effect of thermocycling on bond stregth of luting cements to zirconia ceramic. Dent Mater 22:195–200CrossRefPubMed

19.

Mitra SB (2009) Dental Cements: formulations and handling techniques. In: Curtis RV, Watso F (eds) Dental biomaterials; imaging, testing and modelling, 2nd edn. Woodhead publishing limited, Cambridge, pp 162–193

20.

Ozcan M, Alkumru HN, Gemalmaz D (2001) The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic. Int J Prosthodont 14:335–339PubMed

21.

Ozcan M, Vallittu PK (2003) Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater 19:725–731CrossRefPubMed

22.

Palacios RP, Johnson GH, Phillips KM, Raigrodski AJ (2006) Retention of zirconium oxide crowns with three types of cements. J Prosthet Dent 96:104–114CrossRefPubMed

23.

Piwowarczyk A, Lauer HC (2003) Mechanical properties of luting cements after water storage. Oper Dent 28:535–542PubMed

24.

Piwowarczyk A, Lauer HC, Sorensen JA (2004) In vitro shear bond strength of cementing agents to fixed prosthodontic restorative materials. J Prosthet Dent 92:265–273CrossRefPubMed

25.

Quaas AC, Yang B, Kern M (2007) Panavia F 2.0 bonding to contaminated zirconia ceramic after different cleaning procedures. Dent Mater 23:506–512CrossRefPubMed

26.

Radovic I, Monticelli F, Goracci C, Vulicevic ZR, Ferrari M (2008) Self-adhesive cements: a literature review. 10:251–258

27.

Wolfart M, Lehmen F, Wolfart S, Kern M (2007) Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater 23:45–50CrossRefPubMed

Title: In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion
Authors: Markus B. Blatz
Jin-Ho Phark
Fusun Ozer
Francis K. Mante
Najeed Saleh
Michael Bergler
Avishai Sadan
Publication date: 01-04-2010
Publisher: Springer-Verlag
Published in: Clinical Oral Investigations / Issue 2/2010
Print ISSN: 1432-6981
Electronic ISSN: 1436-3771
DOI: https://doi.org/10.1007/s00784-009-0278-0

Keynote webinar | Spotlight on medication adherence

Springer Medicine

In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion

Abstract

Keynote webinar | Spotlight on medication adherence

Springer Medicine

Abstract

Please log in to get access to this content

Other articles of this Issue 2/2010

Fracture frequency and longevity of fractured resin composite, polyacid-modified resin composite, and resin-modified glass ionomer cement class IV restorations: an up to 14 years of follow-up

Is bovine dentine an appropriate substitute in abrasion studies?

The use of high-resolution digital imaging technology for small diameter K-file length determination in endodontics

Shear bond strength of self-adhesive resins compared to resin cements with etch and rinse adhesives to enamel and dentin in vitro

Parameters affecting retentive force of electroformed double-crown systems

Interest in a new test for caries risk in adolescents undergoing orthodontic treatment