Top

BMC Oral Health

Published in:

Open Access 01-12-2023 | Research

Fracture resistance of monolithic translucent zirconia crown bonded with different self-adhesive resin cement: influence of MDP-containing zirconia primer after aging

Authors: Shaima Tyor, Walid Al-Zordk, Amal Abdelsamad Sakrana

Published in: BMC Oral Health | Issue 1/2023

Abstract

Objectives

Successful ceramic restorations depend on the strong bonding with resin cement and even stress distribution. The aim of this study was to evaluate the impact of adding MDP-containing zirconia primer before self-adhesive resin cements with different functional acidic monomers on fracture resistance of monolithic zirconia crown.

Materials and methods

Eighty defect-free human maxillary premolars were divided according to the cement type and application of MDP-containing zirconia primer into eight groups (n = 10): Calibra Universal (C), Calibra Universal combined with zirconia primer (CZ), RelyX U200 (R), RelyXU200 combined with zirconia primer (RZ), Panavia SA Cement Plus (P), Panavia SA Cement Plus combined with zirconia primer (PZ), Multilink Speed (M), and Multilink Speed combined with zirconia primer (MZ). After teeth preparation and fabrication of zirconia crowns, each crown was bonded to its corresponding tooth. All specimens were subjected to 10,000 thermocycles between 5 and 55°C, followed by cyclic load (50 N) for 240,000 cycles. Each specimen was subjected to a static axial load until fracture using universal testing machine and the fracture load was recorded. The fracture mode studied and recorded. The fracture load results were analyzed using two-way ANOVA test (α = 0.05).

Results

A significant interaction (P = 0.038) of combining MDP-containing zirconia primer and cement type on fracture resistance of monolithic zirconia crown was detected. The mean fracture load values of zirconia crown were significantly influenced by the combined application of the MDP-containing zirconia primer with Calibra Universal (P = 0.01), RelyX U200 (P < 0.001), and Multilink Speed (P = 0.038), while there was no significant difference with Panavia SA Cement Plus (P = 0.660). There was significant difference (F = 20.69, P < 0.001) between the mean fracture loads of groups with self-adhesive cements (C, R, P, and M groups). The highest fracture load was recorded with RZ group (2446.90 ± 126.72 N) while the lowest fracture load was recorded with C group (1623.18 ± 149.86 N).

Conclusions

The self-adhesive resin cement with different acidic functional monomer affects the fracture resistance of monolithic zirconia crown. Application of MDP-containing primer could improve the fracture resistance of monolithic zirconia crown with most self-adhesive cements. The application of an MDP-containing primer had no impact on the fracture resistance of monolithic translucent zirconia crown bonded by MDP-containing self-adhesive resin cement.

Kasem AT, Elsherbiny AA, Abo-Madina M, Tribst JPM, Al-Zordk W. Effect of different designs of minimally invasive cantilever resin-bonded fixed dental prostheses replacing mandibular premolar: long-term fracture load and 3D finite element analysis. J Prosthodont. 2022 Dec;10. https://doi.org/10.1111/jopr.13626.

Stawarczyk B, Keul C, Eichberger M, Figge D, Edelhoff D, Lümkemann N. Three generations of zirconia: from veneered to monolithic. Part I. Quintessence Int. 2017;48(5):369–80. https://doi.org/10.3290/j.qi.a38057.CrossRefPubMed

Camposilvan E, Leone R, Gremillard L, Sorrentino R, Zarone F, Ferrari M, Chevalier J. Aging resistance, mechanical properties and translucency of different yttria-stabilized zirconia ceramics for monolithic dental crown applications. Dent Mater. 2018;34(6):879–90. https://doi.org/10.1016/j.dental.2018.03.006.CrossRefPubMed

Zhang Y, Lawn BR. Novel zirconia materials in Dentistry. J Dent Res. 2018;97(2):140–7. https://doi.org/10.1177/0022034517737483.CrossRefPubMed

Zhang F, Reveron H, Spies BC, Van Meerbeek B, Chevalier J. Trade-off between fracture resistance and translucency of zirconia and lithium-disilicate glass ceramics for monolithic restorations. Acta Biomater. 2019;91:24–34. https://doi.org/10.1016/j.actbio.2019.04.043.CrossRefPubMed

Lawson NC, Jurado CA, Huang CT, Morris GP, Burgess JO, Liu PR, Kinderknecht KE, Lin CP, Givan DA. Effect of surface treatment and cement on fracture load of traditional zirconia (3Y), translucent zirconia (5Y), and lithium disilicate crowns. J Prosthodont. 2019;28(6):659–65. https://doi.org/10.1111/jopr.13088.CrossRefPubMedPubMedCentral

Comino-Garayoa R, Peláez J, Tobar C, Rodríguez V, Suárez MJ. Adhesion to zirconia: a systematic review of surface pretreatments and resin cements. Mater (Basel). 2021;14(11):2751. https://doi.org/10.3390/ma14112751.CrossRef

Kirsten M, Matta RE, Belli R, Lohbauer U, Wichmann M, Petschelt A, Zorzin J. Hygroscopic expansion of self-adhesive resin cements and the integrity of all-ceramic crowns. Dent Mater. 2018;34(8):1102–11. https://doi.org/10.1016/j.dental.2018.04.008.CrossRefPubMed

Yi YA, Ahn JS, Park YJ, Jun SH, Lee IB, Cho BH, Son HH, Seo DG. The effect of sandblasting and different primers on shear bond strength between yttria-tetragonal zirconia polycrystal ceramic and a self-adhesive resin cement. Oper Dent. 2015 Jan-Feb;40(1):63–71. https://doi.org/10.2341/13-149-L.

10.

Alammar A, Blatz MB. The resin bond to high-translucent zirconia-A systematic review. J Esthet Restor Dent. 2022;34(1):117–35. https://doi.org/10.1111/jerd.12876.CrossRefPubMed

11.

Małysa A, Weżgowiec J, Danel D, Boening K, Walczak K, Więckiewicz M. Bond strength of modern self-adhesive resin cements to human dentin and different CAD/CAM ceramics. Acta Bioeng Biomech. 2020;22(2):25–34.CrossRefPubMed

12.

Stefani A, Brito RB Jr, Kina S, Andrade OS, Ambrosano GM, Carvalho AA, Giannini M. Bond strength of resin cements to zirconia ceramic using adhesive primers. J Prosthodont. 2016;25(5):380–5. https://doi.org/10.1111/jopr.12334.CrossRefPubMed

13.

Llerena-Icochea AE, Costa RM, Borges A, Bombonatti J, Furuse AY. Bonding polycrystalline zirconia with 10-MDP-containing adhesives. Oper Dent 2017 May/Jun;42(3):335–41. https://doi.org/10.2341/16-156-L.

14.

Almeida CM, Meereis CTW, Leal FB, Ogliari AO, Piva E, Ogliari FA. Evaluation of long-term bond strength and selected properties of self-adhesive resin cements. Braz Oral Res. 2018;32:e15. https://doi.org/10.1590/1807-3107bor-2018.vol32.0015.CrossRefPubMed

15.

Samran A, Al-Ammari A, El Bahra S, Halboub E, Wille S, Kern M. Bond strength durability of self-adhesive resin cements to zirconia ceramic: an in vitro study. J Prosthet Dent. 2019;121(3):477–84. https://doi.org/10.1016/j.prosdent.2018.03.026.CrossRefPubMed

16.

Yang L, Chen B, Meng H, Zhang H, He F, Xie H, Chen C. Bond durability when applying phosphate ester monomer-containing primers vs. self-adhesive resin cements to zirconia: evaluation after different aging conditions. J Prosthodont Res. 2020;64(2):193–201. https://doi.org/10.1016/j.jpor.2019.06.008.CrossRefPubMed

17.

Xiong Y, Zhao P, Jin C, Wang J, Arola D, Gao S. ï»¿Effect of ï»¿airborne-particle abrasion protocols and MDP-based primer on the bond strength of highly translucent zirconia. J Adhes Dent. 2021;23(5):437–46. https://doi.org/10.3290/j.jad.b2000249.CrossRefPubMed

18.

Wiedenmann F, Becker F, Eichberger M, Stawarczyk B. Measuring the polymerization stress of self-adhesive resin composite cements by crack propagation. Clin Oral Investig. 2021;25(3):1011–8. https://doi.org/10.1007/s00784-020-03391-5.CrossRefPubMed

19.

Steiner R, Heiss-Kisielewsky I, Schwarz V, Schnabl D, Dumfahrt H, Laimer J, Steinmassl O, Steinmassl PA. Zirconia primers improve the shear bond strength of dental zirconia. J Prosthodont. 2020;29(1):62–8. https://doi.org/10.1111/jopr.13013.CrossRefPubMed

20.

Yoshida K. Effect of 10-Methacryloyloxydecyl dihydrogen phosphate concentrations in primers on bonding resin cements to zirconia. J Prosthodont. 2021;30(4):356–62. https://doi.org/10.1111/jopr.13255.CrossRefPubMed

21.

Radovic I, Monticelli F, Goracci C, Vulicevic ZR, Ferrari M. Self-adhesive resin cements: a literature review. J Adhes Dent. 2008;10(4):251–8.PubMed

22.

Manso AP, Carvalho RM. Dental cements for luting and bonding restorations: self-adhesive resin cements. Dent Clin North Am. 2017;61(4):821–34. https://doi.org/10.1016/j.cden.2017.06.006.CrossRefPubMed

23.

Ferracane JL, Stansbury JW, Burke FJ. Self-adhesive resin cements - chemistry, properties and clinical considerations. J Oral Rehabil. 2011;38(4):295–314. https://doi.org/10.1111/j.1365-2842.2010.02148.x.CrossRefPubMed

24.

Roedel L, Bednarzig V, Belli R, Petschelt A, Lohbauer U, Zorzin J. Self-adhesive resin cements: pH-neutralization, hydrophilicity, and hygroscopic expansion stress. Clin Oral Investig. 2017;21(5):1735–41. https://doi.org/10.1007/s00784-016-1947-4.CrossRefPubMed

25.

Chen Y, Tay FR, Lu Z, Chen C, Qian M, Zhang H, Tian F, Xie H. Dipentaerythritol penta-acrylate phosphate - an alternative phosphate ester monomer for bonding of methacrylates to zirconia. Sci Rep. 2016;6:39542. https://doi.org/10.1038/srep39542.CrossRefPubMedPubMedCentral

26.

Fehrenbach J, Isolan CP, Münchow EA. Is the presence of 10-MDP associated to higher bonding performance for self-etching adhesive systems? A meta-analysis of in vitro studies. Dent Mater. 2021;37(10):1463–85. https://doi.org/10.1016/j.dental.2021.08.014.CrossRefPubMed

27.

Madruga FC, Ogliari FA, Ramos TS, Bueno M, Moraes RR. Calcium hydroxide, pH-neutralization and formulation of model self-adhesive resin cements. Dent Mater. 2013;29(4):413–8. https://doi.org/10.1016/j.dental.2013.01.004.CrossRefPubMed

28.

Chuang SF, Kang LL, Liu YC, Lin JC, Wang CC, Chen HM, Tai CK. Effects of silane- and MDP-based primers application orders on zirconia-resin adhesion-A ToF-SIMS study. Dent Mater. 2017;33(8):923–33. https://doi.org/10.1016/j.dental.2017.04.027.CrossRefPubMed

29.

Khanlar LN, Abdou A, Takagaki T, Mori S, Ikeda M, Nikaido T, Zandinejad A, Tagami J. The effects of different silicatization and silanization protocols on the bond durability of resin cements to new high-translucent zirconia. Clin Oral Investig. 2022;26(4):3547–61. https://doi.org/10.1007/s00784-021-04323-7.CrossRefPubMed

30.

Go EJ, Shin Y, Park JW. Evaluation of the microshear bond strength of MDP-containing and non-MDP-containing self-adhesive resin cement on zirconia restoration. Oper Dent 2019 Jul/Aug;44(4):379–85. https://doi.org/10.2341/18-132-L.

31.

Campos F, Valandro LF, Feitosa SA, Kleverlaan CJ, Feilzer AJ, de Jager N, Bottino MA. Adhesive cementation promotes higher fatigue resistance to zirconia crowns. Oper Dent 2017 Mar/Apr;42(2):215–24. https://doi.org/10.2341/16-002-L.

32.

Machry RV, Borges ALS, Pereira GKR, Kleverlaan CJ, Venturini AB, Valandro LF. Influence of the foundation substrate on the fatigue behavior of bonded glass, zirconia polycrystals, and polymer infiltrated ceramic simplified CAD-CAM restorations. J Mech Behav Biomed Mater. 2021;117:104391. https://doi.org/10.1016/j.jmbbm.2021.104391.CrossRefPubMed

33.

Malysa A, Wezgowiec J, Grzebieluch W, Danel DP, Wieckiewicz M. Effect of thermocycling on the bond strength of self-adhesive resin cements used for luting CAD/CAM ceramics to human dentin. Int J Mol Sci. 2022;23(2):745. https://doi.org/10.3390/ijms23020745.CrossRefPubMedPubMedCentral

34.

Han F, Jin X, Yuan X, Bai Z, Wang Q, Xie H. Interactions of two phosphate ester monomers with hydroxyapatite and collagen fibers and their contributions to dentine bond performance. J Dent. 2022;122:104159. https://doi.org/10.1016/j.jdent.2022.104159.CrossRefPubMed

35.

Shahrbaf S, van Noort R, Mirzakouchaki B, Ghassemieh E, Martin N. Fracture strength of machined ceramic crowns as a function of tooth preparation design and the elastic modulus of the cement. Dent Mater. 2014;30(2):234–41. https://doi.org/10.1016/j.dental.2013.11.010.CrossRefPubMed

36.

Cadore-Rodrigues AC, Machado PS, Oliveira JS, Jahn SL, Callegari GL, Dorneles LS, Burgo TAL, Rippe MP, Rocha Pereira GK, Valandro LF. Fatigue performance of fully-stabilized zirconia polycrystals monolithic restorations: the effects of surface treatments at the bonding surface. J Mech Behav Biomed Mater. 2020;110:103962. https://doi.org/10.1016/j.jmbbm.2020.103962.CrossRefPubMed

37.

Ms T. Evaluation of compressive strength and sorption/solubility of four luting cements. J Dent Biomater. 2017;4(2):387–93.PubMedPubMedCentral

38.

Cadore-Rodrigues AC, Machado PS, Oliveira JS, Jahn SL, Dorneles LS, Rippe MP, Pereira GKR, Valandro LF. Surface treatments and its effects on the fatigue behavior of a 5% mol yttria partially stabilized zirconia material. J Mech Behav Biomed Mater. 2021;120:104543. https://doi.org/10.1016/j.jmbbm.2021.104543.CrossRefPubMed

39.

D’Addazio G, Santilli M, Rollo ML, Cardelli P, Rexhepi I, Murmura G. Fracture resistance of zirconia-reinforced lithium silicate ceramic crowns cemented with conventional or adhesive systems: an in vitro study. Mater (Basel). 2020;13(9):25. https://doi.org/10.3390/ma13092012.CrossRef

40.

Shams A, Sakrana AA, Abo El-Farag SA, Özcan M. Assessment of biomechanical behavior of endodontically treated premolar teeth restored with novel endocrown system. Eur J Prosthodont Restor Dent. 2022;30(1):20–35. https://doi.org/10.1922/EJPRD_2244Shams16.CrossRefPubMed

41.

Linhares LA, Pottmaier LF, Lopes GC. Fracture resistance of veneers in premolars. Eur J Dent. 2018 Apr-Jun;12(2):191–8. https://doi.org/10.4103/ejd.ejd_349_17.

42.

Su N, Yue L, Liao Y, Liu W, Zhang H, Li X, Wang H, Shen J. The effect of various sandblasting conditions on surface changes of dental zirconia and shear bond strength between zirconia core and indirect composite resin. J Adv Prosthodont. 2015;7(3):214–23. https://doi.org/10.4047/jap.2015.7.3.214.CrossRefPubMedPubMedCentral

43.

Sakrana AA, Al-Zordk W, El-Sebaey H, Elsherbini A, Özcan M. Does preheating resin cements affect fracture resistance of lithium disilicate and zirconia restorations? Mater (Basel). 2021;14(19):5603. https://doi.org/10.3390/ma14195603.CrossRef

44.

Khanlar LN, Takagaki T, Abdou A, Inokoshi M, Ikeda M, Takahashi A, Yoshihara K, Nagaoka N, Nikaido T, Blatz MB, Tagami J. Effect of air-particle abrasion protocol and primer on the topography and bond strength of a high-translucent zirconia ceramic. J Prosthodont. 2022;31(3):228–38.CrossRefPubMed

45.

Sorrentino R, Triulzio C, Tricarico MG, Bonadeo G, Gherlone EF, Ferrari M. In vitro analysis of the fracture resistance of CAD-CAM monolithic zirconia molar crowns with different occlusal thickness. J Mech Behav Biomed Mater. 2016;61:328–33. https://doi.org/10.1016/j.jmbbm.2016.04.014.CrossRefPubMed

46.

Indergård JA, Skjold A, Schriwer C, Øilo M. Effect of cementation techniques on fracture load of monolithic zirconia crowns. Biomater Investig Dent. 2021;20(1):160–9. https://doi.org/10.1080/26415275.2021.1990764.CrossRef

47.

Burke FJ, Fleming GJ, Nathanson D, Marquis PM. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent. 2002 Spring;4(1):7–22.

48.

El Shahawy OI, Azab MM. Fracture resistance of prefabricated versus custom-made zirconia crowns after thermo-mechanical aging: an in-vitro study. BMC Oral Health 2022 9;22(1):587. https://doi.org/10.1186/s12903-022-02628-x.

49.

Al-Dwairi ZN, Al-Aghbari L, Al-Haj Husain N, Özcan M. Durability of cantilever inlay-retained fixed dental prosthesis fabricated from multilayered zirconia ceramics with different designs. J Mech Behav Biomed Mater. 2023;137:105547. https://doi.org/10.1016/j.jmbbm.2022.105547.CrossRefPubMed

Title: Fracture resistance of monolithic translucent zirconia crown bonded with different self-adhesive resin cement: influence of MDP-containing zirconia primer after aging
Authors: Shaima Tyor
Walid Al-Zordk
Amal Abdelsamad Sakrana
Publication date: 01-12-2023
Publisher: BioMed Central
Published in: BMC Oral Health / Issue 1/2023
Electronic ISSN: 1472-6831
DOI: https://doi.org/10.1186/s12903-023-03365-5

Keynote webinar | Spotlight on medication adherence

Springer Medicine

Fracture resistance of monolithic translucent zirconia crown bonded with different self-adhesive resin cement: influence of MDP-containing zirconia primer after aging

Abstract

Objectives

Materials and methods

Results

Conclusions

Keynote webinar | Spotlight on medication adherence

Springer Medicine

Abstract

Objectives

Materials and methods

Results

Conclusions

Please log in to get access to this content

Other articles of this Issue 1/2023

Oridonin alleviates the inhibitory effect of lipopolysaccharide on the proliferation and osteogenic potential of periodontal ligament stem cells by inhibiting endoplasmic reticulum stress and NF-κB/NLRP3 inflammasome signaling

Non-invasive diagnostic potential of salivary miR-25-3p for periodontal disease and osteoporosis among a cohort of elderly patients with type 2 diabetes mellitus

Evaluation of bacterial leakage and marginal adaptation of the bioceramics pulp dressing materials: an invitro study

The effect of antipsychotic medication and the associated hyperprolactinemia as a risk factor for periodontal diseases in schizophrenic patients: a cohort retrospective study

Oral health-related quality of life in patients aged 8 to 19 years with cleft lip and palate: a systematic review and meta-analysis

Investigating oral health among US adults with sleep disorder: a cross-sectional study