Published in:
01-06-2012 | Refractive Surgery
Fluid dynamics simulation of aqueous humour in a posterior-chamber phakic intraocular lens with a central perforation
Authors:
Takushi Kawamorita, Hiroshi Uozato, Kimiya Shimizu
Published in:
Graefe's Archive for Clinical and Experimental Ophthalmology
|
Issue 6/2012
Login to get access
Abstract
Background
A modified implantable collamer lens (ICL) with a central hole (diameter, 0.36 mm), a “Hole-ICL”, was created to improve aqueous humour circulation. The aim of this study was to investigate the fluid dynamic characteristics of aqueous humour in a Hole-ICL using computational fluid dynamics.
Methods
Fluid dynamics simulation using an ICL was performed with thermal-hydraulic analysis software FloEFD V5 (Mentor Graphics Corp.). For the simulation, three-dimensional eye models based on a modified Liou–Brennan model eye with conventional ICL (Model ICM, STAAR SURGICAL) and a Hole-ICL were used. Both ICLs were −9.0 diopters (D) and 12.0 mm in length, with an optic of 5.5 mm. The vaulting was 0.50 mm. The quantity of aqueous humour produced by the ciliary body was set at 2.80 μl/min. Flow distribution between the anterior surface of the crystalline lens and the posterior surface of the ICL was also calculated, and trajectory analysis was performed.
Results
The flow velocity 0.25 mm in front of the centre of the crystalline lens was 1.52 × 10-1 mm/sec for the Hole-ICL and 1.21 × 10-5 mm/sec for the conventional ICL. Outward flow from the hole in the Hole-ICL was confirmed by trajectory analysis.
Conclusion
These results suggest that Hole-ICLs improve the circulation of aqueous humour to the anterior surface of the crystalline lens.