Skip to main content
Key Specialties
Cardiology Diabetology Endocrinology Gastroenterology Geriatrics and Gerontology Gynecology and Obstetrics Hematology Infectious Disease Internal Medicine Nephrology Neurology Oncology Pediatrics Respiratory Medicine Rheumatology Surgery
Congress Coverage
2024 ACC Congress 2023 ESMO Congress 2023 EASD Congress 2023 ERS Congress 2023 ESC Congress
Clinical Collections
Advances in Alzheimer’s

At a glance: The STEP trials

A round-up of the STEP phase 3 clinical trials evaluating semaglutide for weight loss in people with overweight or obesity.
ADVANCED SEARCH
Log in
Top
BMC Oral Health
Published in: BMC Oral Health 1/2017

Open Access 01-12-2017 | Research article

Effect of mouthrinses on color stability of monolithic zirconia and feldspathic ceramic: an in vitro study

Authors: Reza Derafshi, Hooman Khorshidi, Mohamadhasan Kalantari, Ilyad Ghaffarlou

Published in: BMC Oral Health | Issue 1/2017

Login to get access

Abstract

Background

Patients susceptible to periodontal disease and dental caries, including those who undergo fixed prosthodontic treatments use chemical plaque control agents. However, these mouthrinses may result in adverse effects such as discoloration of the restorative materials. The aim of this study was to compare the color stability of monolithic zirconia and feldspathic porcelain after immersion in two different mouthrinses: 0.2% Chlorhexidine digluconate (CHX), or Listerine®. Color change was evaluated by color spectrophotometer and according to the Commission Internationale de l’Eclairage (CIELab) system.

Methods

We prepared 72 disc-shaped porcelains (n = 36) as follows: Group A consisted of dental direkt cube X2 discs (49% translucency) as the monolithic zirconia and group B consisted of VITA VMK 95 as a feldspathic porcelain. Groups A and B were divided into three subgroups (n = 12 per group). Each subgroup was immersed in one of the following three solutions: distilled water (control), CHX, or Listerine® for 2 min, once per day. We recorded the samples’ baseline color values according to the CIELab system by using a color spectrophotometer operated by an experienced operator. Color measurements were subsequently obtained following 7 days of immersion, and after the samples were rinsed with distilled water and allowed to dry. We measured CIE L*, a*, and b*and calculated the color difference (ΔE*ab). All data were analyzed by the Mann-Whitney and Kruskal-Wallis tests.

Results

Color changes occurred in the experimental groups. The ΔE*ab values were significantly greater in VMK 95 porcelain compared to cube X2 (both p < 0.001) following immersion in CHX and Listerine® mouthrinses. However no significant difference was founded when distilled water was used (p = 0.630). For the two materials, the ΔE values were highest in CHX, followed by the Listerine® and distilled water.

Conclusion

Both monolithic zirconia and feldspathic porcelain were susceptible to color changes following immersion in CHX and Listerine® mouthrinses.
Literature
1.
Alfawaz Y. Zirconia crown as single unit tooth restoration: a literature review. J Contemp Dent Pract. 2016;1:418–22.CrossRef
2.
3.
Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater. 2008;24:299–307.CrossRefPubMed
4.
Curtis AR, Wright AJ, Fleming GJ. The influence of surface modification techniques on the performance of a Y-TZP dental ceramic. J Dent. 2006;34:195–206.CrossRefPubMed
5.
Kelly JR, Denry I. Stabilized zirconia as a structural ceramic: an overview. Dent Mater. 2008;24:289–98.CrossRefPubMed
6.
Harianawala HH, Kheur MG, Apte SK, Kale BB, Sethi TS, Kheur SM. Comparative analysis of transmittance for different types of commercially available zirconia and lithium disilicate materials. J Adv Prosthodont. 2014;6:456–61.CrossRefPubMedPubMedCentral
7.
8.
Artopoulou II, Powers JM, Chambers MS. In Vitro staining effects of stannous fluoride and sodium fluoride on ceramic material. J Prosthet Dent. 2010;103:163–9.CrossRefPubMed
9.
Guignone BC, Silva LK, Soares RV, Akaki E, Goiato MC, Pithon MM, et al. Color stability of ceramic brackets immersed in potentially staining solutions. Dental Press J Orthod. 2015;20:32–8.CrossRefPubMedPubMedCentral
10.
James P, Worthington HV, Parnell C, Harding M, Lamont T, Cheung A, et al. Chlorhexidine mouthrinse as an adjunctive treatment for gingival health. Cochrane Database Syst Rev. 2017;31(3):CD008676.
11.
Coelho ASEC, Paula ABP, Carrilho TMP, da Silva MJRF, Botelho MFRR, Carrilho EVVF. Chlorhexidine mouthwash as an anticaries agent: a systematic review. Quintessence Int. 2017;48:585-91.
12.
Mutlu-Sagesen L, Ergün G, Ozkan Y, Semiz M. Color stability of a dental composite after immersion in various media. Dent Mater J. 2005;24:382–90.CrossRefPubMed
13.
Falkensammer F, Arnetzl GV, Wildburger A, Freudenthaler J. Color stability of different composite resin materials. J Prosthet Dent. 2013;109:378–83.CrossRefPubMed
14.
Vlachojannis C, Al-Ahmad A, Hellwig E, Chrubasik S. Listerine® products: an update on the efficacy and safety. Phytother Res. 2016;30:367–73.CrossRefPubMed
15.
The effects of mouth rinses on the color stability of resin-based restorative materials. J Esthet Restor Dent. 2014;26:264–71. ElEmbaby Ael-S.
16.
Vechiato-Filho AJ, Dos Santos DM, Goiato MC, Moreno A, De Medeiros RA, Kina S, et al. Surface degradation of lithium disilicate ceramic after immersion in acid and fluoride solutions. Am J Dent. 2015;28:174–80.PubMed
17.
Clark EB. Tooth color selection. J Am Dent Assoc. 1933;20:1065–73.
18.
19.
Joiner A, Hopkinson I, Deng Y, Westland S. A review of tooth colour and whiteness. J Dent. 2008;36(Suppl 1):S2–7.CrossRefPubMed
20.
Vichi A, Louca C, Corciolani G, Ferrari M. Color related to ceramic and zirconia restorations: a review. Dent Mater. 2011;27:97–108.CrossRefPubMed
21.
Vichi A, Ferrari M, Davidson CL. Color and opacity variations in three different resin-based composite products after water aging. Dent Mater. 2004;20:530–4.CrossRefPubMed
22.
Wee AG, Lindsey DT, Shroyer KM, Johnston WM. Use of a porcelain color discrimination test to evaluate color difference formulas. J Prosthet Dent. 2007;98:101–9.CrossRefPubMedPubMedCentral
23.
Ghinea R, Pérez MM, Herrera LJ, Rivas MJ, Yebra A, Paravina RD. Color difference thresholds in dental ceramics. J Dent. 2010;38(Suppl 2):e57–64.CrossRefPubMed
24.
Douglas RD, Brewer JD. Acceptability of shade differences in metal ceramic crowns. J Prosthet Dent. 1998;79:254–60.CrossRefPubMed
25.
Douglas RD, Steinhauer TJ, Wee AG. Intraoral determination of the tolerance of dentists for perceptibility and acceptability of shade mismatch. J Prosthet Dent. 2007;97:200–8.CrossRefPubMed
26.
27.
Soygun K, Varol O, Ozer A, Bolayir G. Investigations on the effects of mouthrinses on the colour stability and surface roughness of different dental bioceramics. J Adv Prosthodont. 2017;9:200–7.CrossRefPubMedPubMedCentral
28.
Cengiz S, Yüzbaşioğlu E, Cengiz MI, Velioğlu N, Sevimli G. Color stability and surface roughness of a laboratory-processed composite resin as a function of mouthrinse. J Esthet Restor Dent. 2015;27:314–21.CrossRefPubMed
29.
Celik C, Yuzugullu B, Erkut S, Yamanel K. Effects of mouth rinses on color stability of resin composites. Eur J Dent. 2008;2:247–53.PubMedPubMedCentral
30.
Garoushi S, Lassila L, Hatem M, Shembesh M, Baady L, Salim Z, et al. Influence of staining solutions and whitening procedures on discoloration of hybrid composite resins. Acta Odontol Scand. 2013;71:144–50.CrossRefPubMed
31.
Ertas E, Guler AU, Yucel AC, Koprulu H, Guler E. Color stability of resin composites after immersion in different drinks. Dent Mater J. 2006;25:371–6.CrossRefPubMed
32.
Alharbi A, Ardu S, Bortolotto T, Krejci I. Stain susceptibility of composite and ceramic CAD/CAM blocks versus direct resin composites with different resinous matrices. Odontology. 2017;105:162–9.CrossRefPubMed
33.
Arocha MA, Basilio J, Llopis J, Di Bella E, Roig M, Ardu S, et al. Colour stainability of indirect CAD-CAM processed composites vs. conventionally laboratory processed composites after immersion in staining solutions. J Dent. 2014;42:831–8.CrossRefPubMed
34.
35.
Festuccia MS, Garcia Lda F, Cruvinel DR, Pires-De-Souza Fde C. Color stability, surface roughness and microhardness of composites submitted to mouthrinsing action. J Appl Oral Sci 2012; 20:200-205.
36.
Layton DM, Clarke M, Walton TR. A systematic review and meta-analysis of the survival of feldspathic porcelain veneers over 5 and 10 years. Int J Prosthodont. 2012;25:590–603.PubMed
37.
Guess PC, Kulis A, Witkowski S, Wolkewitz M, Zhang Y, Strub JR. Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater. 2008;24:1556–67.CrossRefPubMed
38.
Fischer J, Stawarczyk B. Compatibility of machined Ce- TZP/Al2O3 nanocomposite and a veneering ceramic. Dent Mater. 2007;23:1500–5.CrossRefPubMed
39.
Sailer I, Philipp A, Zembic A, Pjetursson BE, Hämmerle CH, Zwahlen M. A systematic review of the performance of ceramic and metal implant abutments supporting fixed implant reconstructions. Clin Oral Implants Res. 2009;20:4–31.CrossRefPubMed
40.
Beuer F, Schweiger J, Eichberger M, Kappert HF, Gernet W, Edelhoff D. High-strength CAD/CAM-fabricated veneering material sintered to zirconia copings _ a new fabrication mode for all-ceramic restorations. Dent Mater. 2009;25:121–8.CrossRefPubMed
41.
Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stamford CM, Vargas MA. Realtive translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent. 2002;88:4–9.CrossRefPubMed
42.
Da Silva JD, Park SE, Weber HP, Ishikawa-Nagai S. Clinical performance of a newly developed spectrophotometric system on tooth color reproduction. J Prosthet Dent. 2008;99:361–8.CrossRefPubMed
43.
Motro PF, Kursoglu P, Kazazoglu E. Effects of different surface treatments on stainability of ceramics. J Prosthet Dent. 2012;108:231–7.CrossRefPubMed
44.
Koishi Y, Tanoue N, Matsumura H, Atsuta M. Colour reproducibility of a photo-activated prosthetic composite with different thicknesses. J Oral Rehabil. 2001;28:799–804.CrossRefPubMed
45.
Lee SY, Huang HM, Lin CY, Shih YH. Leached components from dental composites in oral simulating fluids and the resultant composite strengths. J Oral Rehabil. 1998;25:575–88.CrossRefPubMed
Metadata
Title
Effect of mouthrinses on color stability of monolithic zirconia and feldspathic ceramic: an in vitro study
Authors
Reza Derafshi
Hooman Khorshidi
Mohamadhasan Kalantari
Ilyad Ghaffarlou
Publication date
01-12-2017
Publisher
BioMed Central
Published in
BMC Oral Health / Issue 1/2017
Electronic ISSN: 1472-6831
DOI
https://doi.org/10.1186/s12903-017-0419-9

Other articles of this Issue 1/2017

BMC Oral Health 1/2017 Go to the issue

Research article

Association between Low blood lead levels and increased risk of dental caries in children: a cross-sectional study

Research article

Prevalence of Epstein-Barr virus DNA and Porphyromonas gingivalis in Japanese peri-implantitis patients

Correspondence

The future of pediatric dentistry education and curricula: a Chilean perspective

Research article

The basic research factors questionnaire for studying early childhood caries

Research article

How effective is collagen resorbable membrane placement after partially impacted mandibular third molar surgery on postoperative morbidity? A prospective randomized comparative study

Research article

Management of Dentin Hypersensitivity by National Dental Practice-Based Research Network practitioners: results from a questionnaire administered prior to initiation of a clinical study on this topic