Top

Published in:

01-02-2018 | Original Article

Effect of different power settings of Er,Cr:YSGG laser before or after tribosilicatization on the microshear bond strength between zirconia and two types of cements

Authors: Leonardo C. Zeidan, Camila M. Esteves, Juliana A. Oliveira, Aldo Brugnera Jr, Alessandra Cassoni, José Augusto Rodrigues

Published in: Lasers in Medical Science | Issue 2/2018

Abstract

The aim of this study was to evaluate the effect of different output powers of Er,Cr:YSGG laser and the association with tribochemical silica coating on the bond strength between zirconia ceramic and two resin cements. One hundred ninety-two zirconia ceramic bars (IPS e-max ZirCAD Ivoclar Vivadent-) were sectioned (6 × 6 × 4 mm), sintered, and randomly divided into 12 groups for each cement system according to the surface treatment (n = 8): C—without treatment (control); R—tribochemical coating + resin cement (control); 2L—laser (2.0 W) + resin cement; 2LR—laser (2.0 W) + tribochemical coating + resin cement; R2L—tribochemical coating + laser (2.0 W) + resin cement; 2.5L—laser (2.5 W) + resin cement; 2.5LR—laser (2.5 W) + tribochemical coating + resin cement; R2.5L—tribochemical coating + laser (2.5 W) + resin cement; 3L—laser (3.0 W) + resin cement; 3LR—laser (3.0 W) + tribochemical coating + resin cement, R3L—tribochemical coating + laser (3.0 W) + resin cement; and RPHO—tribochemical + resin cement + photoactivation (control). After the surface treatment, the respective primers were applied, and resin cements, Multilink N, Ivoclar Vivadent (M), and Panavia F 2.0, Kuraray Medical Inc. (P), were inserted into Tygon molds which were bonded to the zirconia bars. Each specimen received two cements bars. After 24 h of storage in a relative humidity (100%) at 37 °C, they were evaluated by the microshear test speed of 1 mm/min. The microshear values were analyzed by one-way ANOVA and Tukey’s test (α = 0.05). ANOVA showed statistically significant differences among the evaluated groups. The highest bond strength was observed in RPHO, which statistically differed from all groups. The lowest bond strength was observed in M2.5L (Multilink N) and in P3LR (Panavia F 2.0). It can be concluded that the lowest power output tested was suitable and showed bond strength values similar to tribochemical silica deposition. The light curing is important to adhesion and the tribosilicatizated surface achieves similar microshear values to untreated surface in absence of light.

Denry I, Kelly JR (2008) State of the art of zirconia for dental applications. Dent Mater 24:299–307CrossRefPubMed

Tinschert J, Zwez D, Marx R, Anusavice KJ (2000) Structural reliability of alumina, feldspar, leucite-, mica- and zirconia-based ceramics. J Dent 28:529–535CrossRefPubMed

de Castro HL, Corazza PH, Paes-Júnior TA, Della Bona A (2012) Influence of Y-TZP ceramic treatment and different resin cements on bond strength to dentin. Dent Mater 28:1191–1197CrossRefPubMed

Piconi C, Maccauro G (1999) Zirconia as a ceramic biomaterial. Biomaterials 20:1–25CrossRefPubMed

Wolfart M, Lehmann F, Wolfart S, & Kern M (2007) Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater 2008; 23:45–50

Koizumi H, Nakayama D, Komine F, Blatz MB, Matsumura H (2012) Bonding of resin-based luting cements to zirconia with and without the use of ceramic priming agents. J Adhes Dent 14:385–392PubMed

Albino LG, Gradinar O, Rodrigues JA (2011) Esthetic rehabilitation of anterior teeth with porcelain crowns reinforced with zirconia cores. Gen Dent 59:e1–e6PubMed

Subaşı MG, İnan Ö (2012) Evaluation of the topographical surface changes and roughness of zirconia after different surface treatments. Lasers Med Sci 27:735–742CrossRefPubMed

Koutayas SO, Vagkopoulou T, Pelekanos S, Koidis P, Strub JR (2009) Zirconia in dentistry: part 2. Evidence-based clinical breakthrough. Eur J Esthet Dent 4:348–380PubMed

10.

Palacios RP, Johnson GH, Phillips KM, Raigrodski AJ (2006) Retention of zirconium oxide ceramic crowns with three types of cement. J Prosthet Dent 96:104–114CrossRefPubMed

11.

Aras WMF, Barroso JSM, Blay A, Rodrigues JA, Cassoni A (2016) Er,Cr:YSGG laser irradiation influence on Y-TZP bond strength to resin cement. Int Ceramics 42:13790–95

12.

Piascik JR, Swift EJ, Thompson JY, Grego S, Stoner BR (2009) Surface modification for enhanced silanation of zirconia ceramics. Dent Mater 25:1116–1121CrossRefPubMedPubMedCentral

13.

Casucci A, Mazzitelli C, Monticelli F, Toledano M, Osorio R, Osorio E, Papacchini F, Ferrari M (2010) Morphological analysis of three zirconium oxide ceramics: effect of surface treatments. Dent Mater 26:751–760CrossRefPubMed

14.

Al-Harbi FA, Ayad NM, Khan ZA, Mahrous AA, Morgano SM (2016) In vitro shear bond strength of Y-TZP ceramics to different core materials with the use of three primer/resin cement systems. J Prosthet Dent 115:84–89CrossRefPubMed

15.

Cavalcanti AN, Pilecki P, Foxton RM, Watson TF, Oliveira MT, Gianinni M, Marchi GM (2009) Evaluation of the surface roughness and morphologic features of Y-TZP ceramics after different surface treatments. Photomed Laser Surg 27:473–479CrossRefPubMed

16.

Paranhos MP, Burnett LH Jr, Magne P (2011) Effect of Nd:YAG laser and CO2 laser treatment on the resin bond strength to zirconia ceramic. Quintessence Int 42:79–89PubMed

17.

Tanış MÇ, Akçaboy C (2015) Effects of different surface treatment methods and MDP monomer on resin cementation of zirconia ceramics: an in vitro study. J Lasers Med Sci 6:174–181CrossRefPubMedPubMedCentral

18.

Kirmali O, Kustarci A, Kapdan A, Er K (2015) Efficacy of surface roughness and bond strength of Y-TZP zirconia after various pre-treatments. Photomed Laser Surg 33:15–21CrossRefPubMed

19.

Ourique SA, Arrais CA, Cassoni A, Ota-Tsuzuki C, Rodrigues JA (2011) Effects of different concentrations of carbamide peroxide and bleaching periods on the roughness of dental ceramics. Braz Oral Res 25:453–458CrossRefPubMed

20.

Foxton RM, Cavalcanti AN, Nakajima M, Pilecki P, Sherriff M, Melo L, Watson TF (2011) Durability of resin cement bond to aluminium oxide and zirconia ceramics after air abrasion and laser treatment. J Prosthodont 20:84–92CrossRefPubMed

21.

Della Bona A, Robert Kelly J (2009) The clinical success of all-ceramic restorations. JADA 139(suppl 4):8–13

22.

Filser F, Kocher P, Weibel F (2004) Reliability and strength of all- ceramic dental restorations fabricated by direct ceramic machining (DCM). Int J Comput Dent 89-106

23.

Guess C, Kulis A, Witkowskia S, Wolkewitz M, ZhangY SJR (2004) Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater 24:1556–1567CrossRef

24.

Papia E, Larsson C, du Toit M, Vult von S (2014) Bonding between oxide ceramics and adhesive cement systems: a systematic review. J Biomed Mater Res B Appl Biomater 102:395–413CrossRefPubMed

25.

Subaşı MG, İnan Ö (2014) Influence of surface treatments and resin cement selection on bonding to zirconia. Lasers Med Sci 29:19–27CrossRefPubMed

26.

Ersu B, Yuzugullu B, Ruya Yazici A, Canay S (2009) Surface roughness and bond strengths of glass-infiltrated alumina- ceramics prepared using various surface treatments. J Dent 37:848–856CrossRefPubMed

27.

Akyil MS, Uzun IH, Bayindir F (2010) Bond strength of resin cement to yttrium-stabilized tetragonal zirconia ceramic treated with air abrasion, silica coating and laser irradiation. Photomed Laser Surg 28:801–808CrossRefPubMed

28.

Flury S, Lussi A, Hickel R, Ilie N (2013) Light curing through glass ceramics with a second- and a third-generation LED curing unit: effect of curing mode on the degree of conversion of dual-curing resin cements. Clin Oral Investig 17:2127–2137CrossRefPubMed

29.

Kim MJ, Kim KH, Kim YK, Kwon TY (2013 Nov) Degree of conversion of two dual-cured resin cements light-irradiated through zirconia ceramic disks. J Adv Prosthodont. 5(4):464–470CrossRefPubMedPubMedCentral

30.

Gokce B, Ozpinar B, Dundar M (2007) Bond strengths of all-ceramics: acid vs laser etching. Oper Dent 32:173–178CrossRefPubMed

31.

Spohr AM, Borges GA, Junior LH, Mota EG, Oshima HM (2008) Surface modification of In-Ceram Zirconia ceramic by Nd:YAG laser, Rocatec system, or aluminum oxide sandblasting and its bond strength to a resin cement. Photomed Laser Surg 26:203–208CrossRefPubMed

32.

Ural C, Kulunk T, Kulunk S, Kurt M (2010) The effect of laser treatment on bonding between zirconia ceramic surface and resin cement. Acta Odontol Scand 68:354–359CrossRefPubMed

33.

Kumbuloglu O, Lassila LV, User A, Vallittu PK (2006) Bonding of resin composite luting cements to zirconium oxide by two air-particle abrasion methods. Oper Dent 31:248–255CrossRefPubMed

34.

Kursoglu P, Motro PF, Yurdaguven H (2013) Shear bond strength of resin cement to an acid etched and a laser irradiated ceramic surface. J Adv Prosthodont 5:98–103CrossRefPubMedPubMedCentral

35.

Ghasemi A, Kermanshah H, Ghavam M, Nateghifard A, Torabdazeh H, Nateghifard A, Zolfaghamasab AH (2014) Effect of Er,Cr:YSGG laser treatment on microshear bond strength of zirconia to resin cement before and after sintering. J Adhes Dent 16:377–382PubMed

Title: Effect of different power settings of Er,Cr:YSGG laser before or after tribosilicatization on the microshear bond strength between zirconia and two types of cements
Authors: Leonardo C. Zeidan
Camila M. Esteves
Juliana A. Oliveira
Aldo Brugnera Jr
Alessandra Cassoni
José Augusto Rodrigues
Publication date: 01-02-2018
Publisher: Springer London
Published in: Lasers in Medical Science / Issue 2/2018
Print ISSN: 0268-8921
Electronic ISSN: 1435-604X
DOI: https://doi.org/10.1007/s10103-017-2343-2

At a glance: The STEP trials

Springer Medicine

Effect of different power settings of Er,Cr:YSGG laser before or after tribosilicatization on the microshear bond strength between zirconia and two types of cements

Abstract

At a glance: The STEP trials

Springer Medicine

Abstract

Please log in to get access to this content

Other articles of this Issue 2/2018

Dose-response effect of photobiomodulation therapy on neuromuscular economy during submaximal running

Effect of light polarization on the efficiency of photodynamic therapy of basal cell carcinomas: an in vitro cellular study

Investigation of arginine A-specific cysteine proteinase gene expression profiling in clinical Porphyromonas gingivalis isolates against photokilling action of the photo-activated disinfection

Critical reviews of 1470-nm laser vaporization on benign prostatic hyperplasia

Randomized, blinded, controlled trial on effectiveness of photobiomodulation therapy and exercise training in the fibromyalgia treatment

Low-level laser therapy for the treatment of androgenic alopecia: a review