Skip to main content
Top
Published in: BMC Oral Health 1/2023

Open Access 01-12-2023 | Dental Restoration | Research

Color stability of two different resin matrix ceramics: randomized clinical trial

Authors: Aliaa Ibrahim Mahrous, Aya A. Salama, Alshaimaa Ahmed Shabaan, Ahmed Abdou, Mohamed Mostafa Radwan

Published in: BMC Oral Health | Issue 1/2023

Login to get access

Abstract

Background

One of the most common causes of aesthetic failure and restoration replacement is the tooth restorations color mismatch specifically after aging.

Methods

One hundred and two participants with endodontically treated first molar were selected clinically. The patients were randomly splited into two groups and restored either with Cerasmart hybrid ceramic or Vita Enamic polymer infiltrated ceramic network (PICN) crowns and cemented using dual cure adhesive cement. The color difference (ΔE) values after cementation at 0 (Baseline), 6, and 12 months of use were obtained by quantification of L*, a*, and b* values with a digital spectrophotometer. Mann–Whitney test used to compare between tested groups at each time point and between (α = 0.05).

Results

At 6 months follow-up intervals, Vita Enamic group showed the highest significant ∆L* (p = 0.035) and ∆a* (p < 0.001) compared to Cerasmart group. ∆b* and ∆E showed no significant difference between both groups (p > 0.05). Furthermore, all color parameters of both groups showed statistically significant difference at 12 months follow-up intervals. After 12 months, Vita Enamic restorations presented higher color change compared to Cerasmart restorations with a (p-value of 0.0120). When comparing the total color difference ∆Et through-out the follow-up intervals of Vita Enamic & Cerasmart groups, there were insignificant difference (p = 0.263).

Conclusion

Both hybrid materials demonstrated comparable color stability after 1 year of clinical service within clinical acceptance range. However, Cerasmart demonstrated a better colour stability after 1 year.

Trial registration

ClinicalTrials.gov (ID: NCT05501808) 15/8/ 2022- ‘retrospectively registered’.
Literature
1.
go back to reference Suárez MJ, Lozano JF, Paz Salido M, et al. In vitro marginal fit of CAD-CAM monolithic ceramic restorations. BMC Oral Health. 2021;21(1):256. Suárez MJ, Lozano JF, Paz Salido M, et al. In vitro marginal fit of CAD-CAM monolithic ceramic restorations. BMC Oral Health. 2021;21(1):256.
2.
go back to reference Özcan M, Kurbad A, Gurgan S, et al. Clinical outcomes of lithium disilicate versus zirconia single crowns prepared by digital workflows: a multicenter RCT with 3-year follow-up. BMC Oral Health. 2021;21(1):347. Özcan M, Kurbad A, Gurgan S, et al. Clinical outcomes of lithium disilicate versus zirconia single crowns prepared by digital workflows: a multicenter RCT with 3-year follow-up. BMC Oral Health. 2021;21(1):347.
3.
go back to reference Higa M, Kano T, Oda Y, et al. Color changes of monolithic zirconia and lithium disilicate after accelerated aging. BMC Oral Health. 2021;21(1):117. Higa M, Kano T, Oda Y, et al. Color changes of monolithic zirconia and lithium disilicate after accelerated aging. BMC Oral Health. 2021;21(1):117.
4.
go back to reference Wang T, Cao Z, Li Q, et al. Comparison of the color stability of different CAD/CAM materials after immersion in coffee. BMC Oral Health. 2021;21(1):115. Wang T, Cao Z, Li Q, et al. Comparison of the color stability of different CAD/CAM materials after immersion in coffee. BMC Oral Health. 2021;21(1):115.
5.
go back to reference Acar O, Yilmaz B, Altintas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent. 2016;115:71–5.PubMedCrossRef Acar O, Yilmaz B, Altintas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent. 2016;115:71–5.PubMedCrossRef
6.
go back to reference Abdou A, Takagaki T, Alghamdi A, Tichy A, Nikaido T, Tagami J. Bonding performance of dispersed filler resin composite CAD/CAM blocks with different surface treatment protocols. Dent Mater J. 2021;40(1):209–19.PubMedCrossRef Abdou A, Takagaki T, Alghamdi A, Tichy A, Nikaido T, Tagami J. Bonding performance of dispersed filler resin composite CAD/CAM blocks with different surface treatment protocols. Dent Mater J. 2021;40(1):209–19.PubMedCrossRef
7.
go back to reference Zhang Y, Wang Y, Li Q. Effects of different surface treatments on the color stability of monolithic zirconia ceramics. BMC Oral Health. 2021;21(1):306. Zhang Y, Wang Y, Li Q. Effects of different surface treatments on the color stability of monolithic zirconia ceramics. BMC Oral Health. 2021;21(1):306.
8.
go back to reference Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater. 2013;29:419–26.PubMedCrossRef Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater. 2013;29:419–26.PubMedCrossRef
9.
10.
go back to reference Seyidaliyeva A, Rues S, Evagorou Z, Hassel AJ, Rammelsberg P, Zenthöfer A. Color stability of polymer-infiltrated-ceramics compared with lithium disilicate ceramics and composite. J Esthet Restor Dent. 2020;32:43–50.PubMedCrossRef Seyidaliyeva A, Rues S, Evagorou Z, Hassel AJ, Rammelsberg P, Zenthöfer A. Color stability of polymer-infiltrated-ceramics compared with lithium disilicate ceramics and composite. J Esthet Restor Dent. 2020;32:43–50.PubMedCrossRef
11.
13.
go back to reference Ashtiani AH, Azizian M, Rohani A. Comparison the degree of enamel wear behavior opposed to polymer-infiltrated ceramic and Feldspathic porcelain. Dent Res J. 2019;16:71–5.CrossRef Ashtiani AH, Azizian M, Rohani A. Comparison the degree of enamel wear behavior opposed to polymer-infiltrated ceramic and Feldspathic porcelain. Dent Res J. 2019;16:71–5.CrossRef
14.
go back to reference Yin R, Kim YK, Jang YS, et al. Comparative evaluation of the mechanical properties of CAD/CAM dental blocks. Odontology. 2019;107:360–7.PubMedCrossRef Yin R, Kim YK, Jang YS, et al. Comparative evaluation of the mechanical properties of CAD/CAM dental blocks. Odontology. 2019;107:360–7.PubMedCrossRef
15.
go back to reference Choi JW, Song EJ, Shin JH, Jeong TS, Huh JB. In vitro investigation of wear of CAD/CAM polymeric materials against primary teeth. Materials. 2017;10:1410–22.PubMedPubMedCentralCrossRef Choi JW, Song EJ, Shin JH, Jeong TS, Huh JB. In vitro investigation of wear of CAD/CAM polymeric materials against primary teeth. Materials. 2017;10:1410–22.PubMedPubMedCentralCrossRef
16.
go back to reference Xu Z, Yu P, Arola DD, Min J, Gao S. A comparative study on the wear behavior of a Polymer Infiltrated Ceramic Network (PICN) material and tooth enamel. Dent Mater. 2017;33:1351–61.PubMedCrossRef Xu Z, Yu P, Arola DD, Min J, Gao S. A comparative study on the wear behavior of a Polymer Infiltrated Ceramic Network (PICN) material and tooth enamel. Dent Mater. 2017;33:1351–61.PubMedCrossRef
17.
go back to reference Zhi L, Bortolotto T, Krejci I. Comparative in vitro wear resistance of CAD/CAM composite resin and ceramic materials. J Prosthet Dent. 2016;115:199–202.PubMedCrossRef Zhi L, Bortolotto T, Krejci I. Comparative in vitro wear resistance of CAD/CAM composite resin and ceramic materials. J Prosthet Dent. 2016;115:199–202.PubMedCrossRef
18.
go back to reference Alomari QD, Alkhraisat MH, Al-Wahadni AM, Al-Sabbagh R, Al-Hiyasat AS, Al-Jamal HA. Fracture resistance and mode of failure of CAD/CAM resin composites with different translucencies. BMC Oral Health. 2021;21(1):195. Alomari QD, Alkhraisat MH, Al-Wahadni AM, Al-Sabbagh R, Al-Hiyasat AS, Al-Jamal HA. Fracture resistance and mode of failure of CAD/CAM resin composites with different translucencies. BMC Oral Health. 2021;21(1):195.
19.
go back to reference Skorulska A, Piszko P, Rybak Z, Szymonowicz M, Dobrzyński M. Review on polymer, ceramic and composite materials for CAD/CAM indirect restorations in dentistry-application, mechanical characteristics and comparison. Materials (Basel). 2021;14(7):1592.PubMedCrossRef Skorulska A, Piszko P, Rybak Z, Szymonowicz M, Dobrzyński M. Review on polymer, ceramic and composite materials for CAD/CAM indirect restorations in dentistry-application, mechanical characteristics and comparison. Materials (Basel). 2021;14(7):1592.PubMedCrossRef
20.
go back to reference Samra AP, Pereira SK, Delgado LC, et al. Color stability evaluation of esthetic restorative materials. Braz Oral Res. 2008;22:205–10.PubMedCrossRef Samra AP, Pereira SK, Delgado LC, et al. Color stability evaluation of esthetic restorative materials. Braz Oral Res. 2008;22:205–10.PubMedCrossRef
21.
go back to reference Faris TM, Abdulrahim RH, Mahmood MA, Mhammed Dalloo GA, Gul SS. In vitro evaluation of dental color stability using various aesthetic restorative materials after immersion in different drinks. BMC Oral Health. 2023;23(1):49.PubMedPubMedCentralCrossRef Faris TM, Abdulrahim RH, Mahmood MA, Mhammed Dalloo GA, Gul SS. In vitro evaluation of dental color stability using various aesthetic restorative materials after immersion in different drinks. BMC Oral Health. 2023;23(1):49.PubMedPubMedCentralCrossRef
22.
go back to reference Alsilani RS, Sherif RM, Elkhodary NA. Evaluation of colour stability and surface roughness of three CAD/CAM materials (IPS e.max, Vita Enamic, and PEEK) after immersion in two beverage solutions: an in vitro study. Int J Appl Dent Sci. 2022;8:439–49.CrossRef Alsilani RS, Sherif RM, Elkhodary NA. Evaluation of colour stability and surface roughness of three CAD/CAM materials (IPS e.max, Vita Enamic, and PEEK) after immersion in two beverage solutions: an in vitro study. Int J Appl Dent Sci. 2022;8:439–49.CrossRef
23.
go back to reference International Commission on Illumination. CIE015:2004: Technical Report: Colorimetry. Vienna: 2004. International Commission on Illumination. CIE015:2004: Technical Report: Colorimetry. Vienna: 2004.
25.
go back to reference Gugelmin BP, Miguel LCM, Baratto Filho F, Cunha LFD, Correr GM, Gonzaga CC. Color stability of ceramic veneers luted with resin cements and pre-heated composites: 12 months follow-Up. Braz Dent J. 2020;31(1):69–77.PubMedCrossRef Gugelmin BP, Miguel LCM, Baratto Filho F, Cunha LFD, Correr GM, Gonzaga CC. Color stability of ceramic veneers luted with resin cements and pre-heated composites: 12 months follow-Up. Braz Dent J. 2020;31(1):69–77.PubMedCrossRef
26.
go back to reference Mundial AM. Declaración de Helsinki de la AMM Principios éticos para las investigaciones médicas en seres humanos. 2019. Mundial AM. Declaración de Helsinki de la AMM Principios éticos para las investigaciones médicas en seres humanos. 2019.
27.
go back to reference Kanat-Ertürk B. Color stability of CAD/CAM ceramics prepared with different surface finishing procedures. J Prosthodont. 2020;29(2):166–72.PubMedCrossRef Kanat-Ertürk B. Color stability of CAD/CAM ceramics prepared with different surface finishing procedures. J Prosthodont. 2020;29(2):166–72.PubMedCrossRef
28.
go back to reference Schulz KF, Altman DG, Moher D. CONSORT 2010 statement: updated guidelines for reporting parallel group randomised trials. Trials. 2010;11(1):1–8.CrossRef Schulz KF, Altman DG, Moher D. CONSORT 2010 statement: updated guidelines for reporting parallel group randomised trials. Trials. 2010;11(1):1–8.CrossRef
29.
go back to reference Alqahtani MQ, Chinelatti MA. Color stability of CAD/CAM materials versus direct resin composites: a systematic review. BMC Oral Health. 2019;19(1):5. Alqahtani MQ, Chinelatti MA. Color stability of CAD/CAM materials versus direct resin composites: a systematic review. BMC Oral Health. 2019;19(1):5.
30.
go back to reference Mohamed I, Ehab F, Rasha B. A comparison of color stability between hybrid ceramic and veneers: an in vitro study. Int Arab J Dent. 2019;10(1):3. Mohamed I, Ehab F, Rasha B. A comparison of color stability between hybrid ceramic and veneers: an in vitro study. Int Arab J Dent. 2019;10(1):3.
31.
go back to reference Jiang T, Ma L, Lv P, Zhao Y, Zhang Y. The effect of different staining solutions on the color stability of dental zirconia ceramics before and after polishing. J Prosthet Dent. 2021;126(4):576–83. Jiang T, Ma L, Lv P, Zhao Y, Zhang Y. The effect of different staining solutions on the color stability of dental zirconia ceramics before and after polishing. J Prosthet Dent. 2021;126(4):576–83.
32.
go back to reference Saba DA, Salama RA, Haridy R. Effect of different beverages on the color stability and microhardness of CAD/CAM hybrid versus feldspathic ceramic blocks: an in-vitro study. Futur Dent J. 2017;3:61–6.CrossRef Saba DA, Salama RA, Haridy R. Effect of different beverages on the color stability and microhardness of CAD/CAM hybrid versus feldspathic ceramic blocks: an in-vitro study. Futur Dent J. 2017;3:61–6.CrossRef
33.
go back to reference Albero A, Pascual A, Camps I, et al. Comparative characterization of a novel CAD/CAM polymer-infiltrated-ceramic-network. J Clin Exp Dent. 2015;7:e495–500.PubMedPubMedCentralCrossRef Albero A, Pascual A, Camps I, et al. Comparative characterization of a novel CAD/CAM polymer-infiltrated-ceramic-network. J Clin Exp Dent. 2015;7:e495–500.PubMedPubMedCentralCrossRef
34.
go back to reference Awad D, Stawarczyk B, Liebermann A, et al. Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness. J Prosthet Dent. 2015;113:534–40.PubMedCrossRef Awad D, Stawarczyk B, Liebermann A, et al. Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness. J Prosthet Dent. 2015;113:534–40.PubMedCrossRef
35.
go back to reference Facenda JC, Borba M, Corazza PH. A literature review on the new polymer-infiltrated ceramic-network material (PICN). J Esthet Restor Dent. 2018;30:281–6.PubMedCrossRef Facenda JC, Borba M, Corazza PH. A literature review on the new polymer-infiltrated ceramic-network material (PICN). J Esthet Restor Dent. 2018;30:281–6.PubMedCrossRef
36.
go back to reference Gawriolek M, Sikorska E, Ferreira LF, et al. Color and luminescence stability of selected dental materials in vitro. J Prosthodont. 2012;21:112–22.PubMedCrossRef Gawriolek M, Sikorska E, Ferreira LF, et al. Color and luminescence stability of selected dental materials in vitro. J Prosthodont. 2012;21:112–22.PubMedCrossRef
37.
go back to reference Barutçugil Ç, Bilgili D, Barutcigil K, Dündar A, Büyükkaplan US, Yilmaz B. Discoloration and translucency changes of CAD-CAM materials after exposure to beverages. J Prosthet Dent. 2019;122(4):325–31.PubMedCrossRef Barutçugil Ç, Bilgili D, Barutcigil K, Dündar A, Büyükkaplan US, Yilmaz B. Discoloration and translucency changes of CAD-CAM materials after exposure to beverages. J Prosthet Dent. 2019;122(4):325–31.PubMedCrossRef
38.
go back to reference Sen N, Us YO. Mechanical and optical properties of monolithic CAD-CAM restorative materials. J Prosthet Dent. 2018;119(4):593–9.PubMedCrossRef Sen N, Us YO. Mechanical and optical properties of monolithic CAD-CAM restorative materials. J Prosthet Dent. 2018;119(4):593–9.PubMedCrossRef
39.
go back to reference Lee YK. Influence of scattering/absorption characteristics on the color of resin composites. Dent Mater. 2007;23:124.PubMedCrossRef Lee YK. Influence of scattering/absorption characteristics on the color of resin composites. Dent Mater. 2007;23:124.PubMedCrossRef
40.
go back to reference Ferracane JL. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater. 2006;22:211–22.PubMedCrossRef Ferracane JL. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater. 2006;22:211–22.PubMedCrossRef
41.
go back to reference Liu C, Zhang Y, Wang Y. Effects of resin matrix on translucency and color stability of dental ceramics. J Prosthodontic Res. 2021;65(2):185–91. Liu C, Zhang Y, Wang Y. Effects of resin matrix on translucency and color stability of dental ceramics. J Prosthodontic Res. 2021;65(2):185–91.
42.
go back to reference Arif R, Yilmaz B, Johnston WM. In vitro color stainability and relative translucency of CAD-CAM restorative materials used for laminate veneers and complete crowns. J Prosthet Dent. 2019;122:160–6.PubMedCrossRef Arif R, Yilmaz B, Johnston WM. In vitro color stainability and relative translucency of CAD-CAM restorative materials used for laminate veneers and complete crowns. J Prosthet Dent. 2019;122:160–6.PubMedCrossRef
43.
go back to reference Al Amri MD, Labban N, Alhijji S, Alamri H, Iskandar M, Platt JA. In vitro evaluation of translucency and color stability of CAD/CAM polymer-infiltrated ceramic materials after accelerated aging. J Prosthodont. 2021;30:318–28.PubMedCrossRef Al Amri MD, Labban N, Alhijji S, Alamri H, Iskandar M, Platt JA. In vitro evaluation of translucency and color stability of CAD/CAM polymer-infiltrated ceramic materials after accelerated aging. J Prosthodont. 2021;30:318–28.PubMedCrossRef
44.
go back to reference Paolone G, Mandurino M, De Palma F, Mazzitelli C, Scotti N, Breschi L, Gherlone E, Cantatore G, Vichi A. Color stability of polymer-based composite CAD/CAM blocks: a systematic review. Polymers (Basel). 2023;15(2):464.PubMedCrossRef Paolone G, Mandurino M, De Palma F, Mazzitelli C, Scotti N, Breschi L, Gherlone E, Cantatore G, Vichi A. Color stability of polymer-based composite CAD/CAM blocks: a systematic review. Polymers (Basel). 2023;15(2):464.PubMedCrossRef
45.
go back to reference Peutzfeldt A, Garcia-Godoy F, Flury S, Eliades G, Lussi A. Influence of coating procedure on the performance of resin composite restorations after 2 years. Clin Oral Investig. 2019;23(8):3165–317. Peutzfeldt A, Garcia-Godoy F, Flury S, Eliades G, Lussi A. Influence of coating procedure on the performance of resin composite restorations after 2 years. Clin Oral Investig. 2019;23(8):3165–317.
46.
go back to reference Sarıkaya I, Yerliyurt K, Hayran Y. Effect of surface finishing on the colour stability and translucency of dental ceramics. BMC Oral Health. 2018;18:40.PubMedPubMedCentralCrossRef Sarıkaya I, Yerliyurt K, Hayran Y. Effect of surface finishing on the colour stability and translucency of dental ceramics. BMC Oral Health. 2018;18:40.PubMedPubMedCentralCrossRef
47.
go back to reference Stamenković DD, Tango RN, Todorović A, Karasan D, Sailer I, Paravina RD. Staining and aging-dependent changes in color of CAD-CAM materials. J Prosthet Dent. 2021;126(5):672–8.PubMedCrossRef Stamenković DD, Tango RN, Todorović A, Karasan D, Sailer I, Paravina RD. Staining and aging-dependent changes in color of CAD-CAM materials. J Prosthet Dent. 2021;126(5):672–8.PubMedCrossRef
48.
go back to reference Mansour CH, Kheiralla LS, Ghanem LA. Color stability and surface roughness of CAD/CAM ceramill composite and cerasmart endocrowns. J Dent Med Sci. 2018;17:13. Mansour CH, Kheiralla LS, Ghanem LA. Color stability and surface roughness of CAD/CAM ceramill composite and cerasmart endocrowns. J Dent Med Sci. 2018;17:13.
49.
go back to reference Kocak E, Ekren O, Johnston W, Ucar Y. Analysis of color differences in stained contemporary esthetic dental materials. J Prosthet Dent. 2021;126:438–45.PubMedCrossRef Kocak E, Ekren O, Johnston W, Ucar Y. Analysis of color differences in stained contemporary esthetic dental materials. J Prosthet Dent. 2021;126:438–45.PubMedCrossRef
Metadata
Title
Color stability of two different resin matrix ceramics: randomized clinical trial
Authors
Aliaa Ibrahim Mahrous
Aya A. Salama
Alshaimaa Ahmed Shabaan
Ahmed Abdou
Mohamed Mostafa Radwan
Publication date
01-12-2023
Publisher
BioMed Central
Published in
BMC Oral Health / Issue 1/2023
Electronic ISSN: 1472-6831
DOI
https://doi.org/10.1186/s12903-023-03364-6

Other articles of this Issue 1/2023

BMC Oral Health 1/2023 Go to the issue