Top

Published in:

01-12-2011 | Original Article

Accuracy of templates for navigated implantation made by rapid prototyping with DICOM datasets of cone beam computer tomography (CBCT)

Authors: Jochen Weitz, Herbert Deppe, Sebastian Stopp, Tim Lueth, Steffen Mueller, Bettina Hohlweg-Majert

Published in: Clinical Oral Investigations | Issue 6/2011

Abstract

The aim of this study is to evaluate the accuracy of a surgical template-aided implant placement produced by rapid prototyping using a DICOM dataset from cone beam computer tomography (CBCT). On the basis of CBCT scans (Sirona® Galileos), a total of ten models were produced using a rapid-prototyping three-dimensional printer. On the same patients, impressions were performed to compare fitting accuracy of both methods. From the models made by impression, templates were produced and accuracy was compared and analyzed with the rapid-prototyping model. Whereas templates made by conventional procedure had an excellent accuracy, the fitting accuracy of those produced by DICOM datasets was not sufficient. Deviations ranged between 2.0 and 3.5 mm, after modification of models between 1.4 and 3.1 mm. The findings of this study suggest that the accuracy of the low-dose Sirona Galileos® DICOM dataset seems to show a high deviation, which is not useable for accurate surgical transfer for example in implant surgery.

Carrafiello G, Dizonno M, Colli V, Strocchi S, Pozzi Taubert S, Leonardi A, Giorgianni A, Barresi M, Macchi A, Bracchi E, Conte L, Fugazzola C (2010) Comparative study of jaws with multislice computed tomography and cone-beam computed tomography. Radiol Med 115(4):600–611PubMedCrossRef

Mozzo P, Procacci C, Tacconi A, Martini PT, Andreis IA (1998) A new volumetric ct machine for dental imaging based on the cone-beam technique: preliminary results. Eur Radiol 8(9):1558–1564PubMedCrossRef

Broer N, Fuhrmann A, Bremert S, Schulze D, Kahl-Nieke B (2005) Evaluation of transversal slice imaging in the diagnosis of tooth displacement with special consideration of the upper canines. J Orofac Orthop 66(2):94–109PubMedCrossRef

Hagtvedt T, Aalokken TM, Notthellen J, Kolbenstvedt A (2003) A new low-dose ct examination compared with standard-dose CT in the diagnosis of acute sinusitis. Eur Radiol 13(5):976–980PubMed

Ludlow JB, Davies-Ludlow LE, Brooks SL (2003) Dosimetry of two extraoral direct digital imaging devices: NewTom cone beam CT and orthophos plus DS panoramic unit. Dentomaxillofac Radiol 32(4):229–234PubMedCrossRef

Ludlow JB, Ivanovic M (2008) Comparative dosimetry of dental CBCT devices and 64-slice ct for oral and maxillofacial radiology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 106(1):106–114PubMedCrossRef

Mah JK, Danforth RA, Bumann A, Hatcher D (2003) Radiation absorbed in maxillofacial imaging with a new dental computed tomography device. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 96(4):508–513PubMedCrossRef

Dreiseidler T, Neugebauer J, Ritter L, Lingohr T, Rothamel D, Mischkowski RA, Zoller JE (2009) Accuracy of a newly developed integrated system for dental implant planning. Clin Oral Implants Res 20(11):1191–1199PubMedCrossRef

Di Giacomo GA, Cury PR, de Araujo NS, Sendyk WR, Sendyk CL (2005) Clinical application of stereolithographic surgical guides for implant placement: preliminary results. J Periodontol 76(4):503–507PubMedCrossRef

10.

Ewers R, Schicho K, Truppe M, Seemann R, Reichwein A, Figl M, Wagner A (2004) Computer-aided navigation in dental implantology: 7 years of clinical experience. J Oral Maxillofac Surg 62(3):329–334PubMedCrossRef

11.

Mupparapu M, Singer SR (2004) Implant imaging for the dentist. J Can Dent Assoc 70(1):32PubMed

12.

Wagner A, Wanschitz F, Birkfellner W, Zauza K, Klug C, Schicho K, Kainberger F, Czerny C, Bergmann H, Ewers R (2003) Computer-aided placement of endosseous oral implants in patients after ablative tumour surgery: assessment of accuracy. Clin Oral Implants Res 14(3):340–348PubMedCrossRef

13.

Stopp S, Wolff T, Irlinger F, Lueth T (2008) A new method for printer calibration and contour accuracy manufacturing with 3D-print technology. Rapid Prototyping J 14(3):167–172CrossRef

14.

Stopp S, Deppe H, Lueth T (2007) Manufacturing drill templates for dental implantology using a 3D printer. In: Freysinger W, Weber S, Caversaccio M (eds) Computer aided surgery around the head cas-h 2007, 1st edn. Pro-Business, Innsbruck, pp 144–146

15.

Schneider D, Marquardt P, Zwahlen M, Jung RE (2009) A systematic review on the accuracy and the clinical outcome of computer-guided template-based implant dentistry. Clin Oral Implants Res 20(Suppl 4):73–86PubMedCrossRef

16.

Ito K, Gomi Y, Sato S, Arai Y, Shinoda K (2001) Clinical application of a new compact CT system to assess 3-D images for the preoperative treatment planning of implants in the posterior mandible a case report. Clin Oral Implants Res 12(5):539–542PubMedCrossRef

17.

Lofthag-Hansen S, Grondahl K, Ekestubbe A (2009) Cone-beam CT for preoperative implant planning in the posterior mandible: visibility of anatomic landmarks. Clin Implant Dent Relat Res 11(3):246–255PubMedCrossRef

18.

Sato S, Arai Y, Shinoda K, Ito K (2004) Clinical application of a new cone-beam computerized tomography system to assess multiple two-dimensional images for the preoperative treatment planning of maxillary implants: case reports. Quintessence Int 35(7):525–528PubMed

19.

Sanna AM, Molly L, van Steenberghe D (2007) Immediately loaded CAD–CAM manufactured fixed complete dentures using flapless implant placement procedures: a cohort study of consecutive patients. J Prosthet Dent 97(6):331–339PubMedCrossRef

20.

Sohmura T, Kusumoto N, Otani T, Yamada S, Wakabayashi K, Yatani H (2009) CAD/CAM fabrication and clinical application of surgical template and bone model in oral implant surgery. Clin Oral Implants Res 20(1):87–93PubMedCrossRef

21.

van Steenberghe D, Glauser R, Blomback U, Andersson M, Schutyser F, Pettersson A, Wendelhag I (2005) A computed tomographic scan-derived customized surgical template and fixed prosthesis for flapless surgery and immediate loading of implants in fully edentulous maxillae: a prospective multicenter study. Clin Implant Dent Relat Res 7(Suppl 1):S111–S120PubMedCrossRef

22.

Gebhardt A (2000) Industrielle rapid prototyping systeme Rapid prototyping—werkzeuge für die schnelle produktentstehung, 2nd edn. Hanser, Munich

23.

Wohlers T (2005) Rapid prototyping, tooling & manufacturing state of the industry. Fort Collins, Wohlers

24.

Dimitrov D, Schreve K, de Beer N (2006) Advances in three dimensional printing—state of the art and future perspectives. Rapid Prototyping J 12(3):136–147CrossRef

25.

Dimitrov D, van Wijck W, Schreve K, de Beer N (2006) Investigating the achievable accuracy of three dimensional printing. Rapid Prototyping J 12(1):42–52CrossRef

26.

Lambrecht JT, Berndt DC, Schumacher R, Zehnder M (2009) Generation of three-dimensional prototype models based on cone beam computed tomography. Int J Comput Assist Radiol Surg 4(2):175–180PubMedCrossRef

27.

Shahbazian M, Jacobs R, Wyatt J, Willems G, Pattijn V, Dhoore E, C VANL, Vinckier F (2010) Accuracy and surgical feasibility of a CBCT-based stereolithographic surgical guide aiding autotransplantation of teeth: in vitro validation. J Oral Rehabil. doi:10.1111/j.1365-2842.2010.02107.x

28.

Fortin T, Champleboux G, Bianchi S, Buatois H, Coudert JL (2002) Precision of transfer of preoperative planning for oral implants based on cone-beam CT-scan images through a robotic drilling machine. Clin Oral Implants Res 13(6):651–656PubMedCrossRef

29.

Kleinman A, Leyva F, Lozada J, Patel RD (2009) Loma Linda guide: a stereolithographically designed surgical template: technique paper. J Oral Implantol 35(5):238–244PubMedCrossRef

30.

Cheng AC, Tee-Khin N, Siew-Luen C, Lee H, Wee AG (2008) The management of a severely resorbed edentulous maxilla using a bone graft and a CAD/CAM-guided immediately loaded definitive implant prosthesis: a clinical report. J Prosthet Dent 99(2):85–90PubMedCrossRef

31.

Kusumoto N, Sohmura T, Yamada S, Wakabayashi K, Nakamura T, Yatani H (2006) Application of virtual reality force feedback haptic device for oral implant surgery. Clin Oral Implants Res 17(6):708–713PubMedCrossRef

32.

Stumpel LJ (2010) Deformation of stereolithographically produced surgical guides: an observational case series report. Clin Implant Dent Relat Res. doi:10.1111/j.1708-8208.2010.00268.x

33.

Stievenart M, Malevez C (2010) Rehabilitation of totally atrophied maxilla by means of four zygomatic implants and fixed prosthesis: a 6–40-month follow-up. Int J Oral Maxillofac Surg 39(4):358–363PubMedCrossRef

Title: Accuracy of templates for navigated implantation made by rapid prototyping with DICOM datasets of cone beam computer tomography (CBCT)
Authors: Jochen Weitz
Herbert Deppe
Sebastian Stopp
Tim Lueth
Steffen Mueller
Bettina Hohlweg-Majert
Publication date: 01-12-2011
Publisher: Springer-Verlag
Published in: Clinical Oral Investigations / Issue 6/2011
Print ISSN: 1432-6981
Electronic ISSN: 1436-3771
DOI: https://doi.org/10.1007/s00784-010-0468-9

At a glance: The STEP trials

Springer Medicine

Accuracy of templates for navigated implantation made by rapid prototyping with DICOM datasets of cone beam computer tomography (CBCT)

Abstract

At a glance: The STEP trials

Springer Medicine

Abstract

Please log in to get access to this content

Other articles of this Issue 6/2011

Clinician- and patient-reported long-term evaluation of screw- and cement-retained implant restorations: a 5-year prospective study

Stimulated and unstimulated saliva progesterone in menopausal women with oral dryness feeling

Sealing proximal surfaces with polyurethane tape: three-year evaluation

The effect of the post length and cusp coverage on the cycling and static load of endodontically treated maxillary premolars

Diffusion of peroxides through dentine in vitro with and without prior use of a desensitizing varnish

Histology and intramandibular course of the inferior alveolar nerve