Published in:
01-03-2017 | Ideas and Technical Innovations
A new method to precisely control the depth of percutaneous screws into the pedicle by counting the rotation number of the screw with low radiation exposure: technical note
Published in: European Spine Journal | Issue 3/2017
Login to get accessAbstract
Study design
Technique note.
Objectives
To report a new method for precisely controlling the depth of percutaneous pedicle screws (PPS)—without radiation exposure to surgeons and less fluoroscopy exposure to patients than with conventional methods.
Summary of background data
PPS is widely used in minimal invasive spine surgery; the advantages include reduced muscle damage, pain, and hospital stays. However, placement of PPS demands repeated checking with fluoroscopy. Thus, radiation exposure is considerable for both surgeons and patients.
Methods
The PPS depth was determined by counting rotations of the screws. The distance between screw threads can be measured for particular screws; thus, full rotations of the PPS results in the screw advancing in the pedicle the distance between screw threads. To fully insert screws into the pedicle, the number of full rotations is equal to the number of threads in the PPS.
Results
We applied this technique in 58 patients with thoracolumbar fracture. The position and depth of the screws was checked during the operation with the C-arm and after operation by anteroposterior X-ray film or computed tomography. No additional procedures were required to correct the screws; we observed no neurological deficits or malpositioning of the screws. In the screw placement procedure, the radiation exposure for surgeons is zero, and the patient is well protected from extensive radiation exposure.
Conclusions
This method of counting rotation of screws is a safe way to precisely determine the depth of PPS in the placement procedure.
Level of evidence
IV.