Abstract
Exfoliated graphite nanoplatelets (xGnPs) are platelet-like graphite nanocrystals with multi-graphene layers. They are promising materials for use as nanofillers in polymer composites due to their high conductivity, unique graphitized plane structure, and low manufacturing cost. Mixed polypropylene (PP)/xGnPs/carbon nanotube (CNT) composites were fabricated by a solution blending method. The soundproofing characteristics, mechanical properties, and physical morphologies of the composites were investigated at different filler loads with various nanomaterials. The tensile strength of the pure PP is 26.4 MPa. The PP/0.3 wt% xGnPs/0.5 wt% CNT composite had a tensile strength of 34.2 MPa, an increase of 29% relative to that of PP. Compared to PP, the composite material blocked an additional 3 dB of sound at frequencies between 520 Hz and 640 Hz. TEM images of the PP/xGnP/CNT composites showed that the CNTs were homogeneously dispersed and connected to the xGnP sheets in the PP matrix. The xGnP and CNT nanofillers formed 3D hybrid architectures that afforded remarkable improvements in mechanical and soundproofing properties.
Similar content being viewed by others
References
Tabuani, D., Ceccia, S., and Camino, G., “Polypropylene Nanocomposites, Study of the Influence of the Nanofiller Nature on Morphology and Material Properties,” Wiley Online Library, Vol. 301, No. 1, pp. 114–127, 2011.
Tang, C., Xiang, L., Su, J., Wang, K., Yang, C., Zhang, Q., and Fu, Q., “Largely Improved Tensile Properties of Chitosan Film Via Unique Synergistic Reinforcing Effect of Carbon Nanotube and Clay,” The Journal of Physical Chemistry B, Vol. 112, No. 13, pp. 3876–3881, 2008.
Yang, S. Y., Lin, W. N., Huang, Y. L., Tien, H. W., Wang, J. Y., Ma, C. C. M., Li, S. M., and Wang, Y. S., “Synergetic Effects of Graphene Platelets and Carbon Nanotubes on the Mechanical and Thermal Properties of Epoxy Composites,” Carbon, Vol. 49, No. 3, pp. 793–803, 2011.
Rath, T. and Li, Y., “Nanocomposites Based on Polystyrene-B-Poly (Ethylene-R-Butylene)-B-Polystyrene and Exfoliated Graphite Nanoplates: Effect of Nanoplatelet Loading on Morphology and Mechanical Properties,” Composites Part A: Applied Science and Manufacturing, Vol. 42, No. 12, pp. 1995–2002, 2011.
Jeon, S. H., Choi, W. C., Park, T. H., Kim, H. M., Jung, I. E., Baek, C. K., Seo, K. J., and Choi, B. H., “Development of a New Light-Weight Car Audio Using Polycarbonate/Acrylonitrile-Butadiene-Styrene Copolymer Composite Based Hybrid Material,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 1, pp. 85–96, 2012.
Lee, J. C., Hong, Y. S., Nan, R. G., Jang, M. K., Lee, C. S., Ahn, S. H., and Kang, Y. J., “Soundproofing Effect of Nano Particle Reinforced Polymer Composites,” Journal of Mechanical Science and Technology, Vol. 22, No. 8, pp. 1468–1474, 2008.
Yan, J., Lee, J., Lee, C., Kang, D., Kang, Y., and Ahn, S., “Soundproof Effect of Nanoclay Reinforced Polypropylene Composites,” The 18th International Conference on Composite Materials, Jeju, Korea, 2011.
An, J. E., Jeon, G. W., and Jeong, Y. G., “Preparation and Properties of Polypropylene Nanocomposites Reinforced with Exfoliated Graphene,” Fibers and Polymers, Vol. 13, No. 4, pp. 507–514, 2012.
Teng, C. C., Ma, C. C. M., Huang, Y. W., Yuen, S. M., Weng, C. C., Chen, C. H., and Su, S. F., “Effect of Mwcnt Content on Rheological and Dynamic Mechanical Properties of Multiwalled Carbon Nanotube/Polypropylene Composites,” Composites Part A: Applied Science and Manufacturing, Vol. 39, No. 12, pp. 1869–1875, 2008.
Kawasumi, M., Hasegawa, N., Kato, M., Usuki, A., and Okada, A., “Preparation and Mechanical Properties of Polypropylene-Clay Hybrids,” Macromolecules, Vol. 30, No. 20, pp. 6333–6338, 1997.
Seo, M. K. and Park, S. J., “Electrical Resistivity and Rheological Behaviors of Carbon Nanotubes-Filled Polypropylene Composites,” Chemical Physics Letters, Vol. 395, No. 1, pp. 44–48, 2004.
Kim, M. S., Lee, S. E., Lee, W. J., and Kim, C. G., “Mechanical Properties of Mwnt-Loaded Plain-Weave Glass/Epoxy Composites,” Advanced Composite Materials, Vol. 18, No. 3, pp. 209–219, 2009.
Xia, H., Wang, Q., Li, K., and Hu, G. H., “Preparation of Polypropylene/Carbon Nanotube Composite Powder with a Solid-State Mechanochemical Pulverization Process,” Journal of Applied Polymer Science, Vol. 93, No. 1, pp. 378–386, 2004.
Yoo, L. and Kim, H., “Conductivities of Graphite Fiber Composites with Single-Walled Carbon Nanotube Layers,” Int. J. Precis. Eng. Manuf., Vol. 12, No. 4, pp. 745–748, 2011.
Jose, M. V., Dean, D., Tyner, J., Price, G., and Nyairo, E., “Polypropylene/Carbon Nanotube Nanocomposite Fibers: Process-Morphology-Property Relationships,” Journal of Applied Polymer Science, Vol. 103, No. 6, pp. 3844–3850, 2007.
Du, J., Bai, J., and Cheng, H., “The Present Status and Key Problems of Carbon Nanotube Based Polymer Composites,” eXPRESS Polymer Letters, Vol. 1, No. 5, pp. 253–273, 2007.
Funck, A. and Kaminsky, W., “Polypropylene Carbon Nanotube Composites by in Situ Polymerization,” Composites Science and Technology, Vol. 67, No. 5, pp. 906–915, 2007.
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. B. T., and Ruoff, R. S., “Graphene-Based Composite Materials,” Nature, Vol. 442, No. 7100, pp. 282–286, 2006. 1
Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Wu, Y., Nguyen, S. B. T., and Ruoff, R. S., “Synthesis of Graphene-Based Nanosheets Via Chemical Reduction of Exfoliated Graphite Oxide,” Carbon, Vol. 45, No. 7, pp. 1558–1565, 2007.
Chen, G., Wu, D., Weng, W., and Wu, C., “Exfoliation of Graphite Flake and Its Nanocomposites,” Carbon, Vol. 41, pp. 579–625, 2003.
Kim, S., Seo, J., and Drzal, L. T., “Improvement of Electric Conductivity of Lldpe Based Nanocomposite by Paraffin Coating on Exfoliated Graphite Nanoplatelets,” Composites Part A: Applied Science and Manufacturing, Vol. 41, No. 5, pp. 581–587, 2010.
Kalaitzidou, K., Fukushima, H., and Drzal, L. T., “Mechanical Properties and Morphological Characterization of Exfoliated Graphite-Polypropylene Nanocomposites,” Composites Part A: Applied Science and Manufacturing, Vol. 38, No. 7, pp. 1675–1682, 2007.
Kumar, S., Sun, L., Caceres, S., Li, B., Wood, W., Perugini, A., Maguire, R., and Zhong, W., “Dynamic Synergy of Graphitic Nanoplatelets and Multi-Walled Carbon Nanotubes in Polyetherimide Nanocomposites,” Nanotechnology, Vol. 21, No. 10, Paper No. 105702, 2010.
King, J. A., Via, M. D., Morrison, F. A., Wiese, K. R., Beach, E. A., Cieslinski, M. J., and Bogucki, G. R., “Characterization of Exfoliated Graphite Nanoplatelets/Polycarbonate Composites: Electrical and Thermal Conductivity, and Tensile, Flexural, and Rheological Properties,” Journal of Composite Materials, Vol. 46, No. 9, pp. 1029–1039, 2011.
Tait, M., Pegoretti, A., Dorigato, A., and Kalaitzidou, K., “The Effect of Filler Type and Content and the Manufacturing Process on the Performance of Multifunctional Carbon/Poly-Lactide Composites,” Carbon, Vol. 49, No. 13, pp. 4280–4290, 2011.
ASTM D638-03, “Standard Test Method for Tensile Properties of Plastics,” 2003.
ASTM E1050-98, “Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System,” 2006.
Zhao, X., Zhang, Q., Chen, D., and Lu, P., “Enhanced Mechanical Properties of Graphene-Based Poly (Vinyl Alcohol) Composites,” Macromolecules, Vol. 43, No. 5, pp. 2357–2363, 2010.
Zhao, J., Wang, X. M., Chang, J., Yao, Y., and Cui, Q., “Sound Insulation Property of Wood -Waste Tire Rubber Composite,” Composites Science and Technology, Vol. 70, No. 14, pp. 2033–2038, 2010.
Fu, Q., Tang, C., Deng, H., and Zhang, Q., “Polymer Nanocomposites with Clay and Carbon Nanotubes, in: Mittal, V., Polymer Nanotube Nanocomposites: Synthesis, Properties, and Applications,” Scrivender Publishing LLC, pp. 83–112, 2010.
Levchenko, V., Mamunya, Y., Boiteux, G., Lebovka, M., Alcouffe, P., Seytre, G., and Lebedev, E., “Influence of Organo-Clay on Electrical and Mechanical Properties of Pp/Mwcnt/Oc Nanocomposites,” European Polymer Journal, Vol. 47, No. 7, pp. 1351–1360, 2011.
Hong, C. H., Lee, Y. B., Bae, J. W., Jho, J. Y., Nam, B. U., and Hwang, T. W., “Preparation and Mechanical Properties of Polypropylene/Clay Nanocomposites for Automotive Parts Application,” Journal of Applied Polymer Science, Vol. 98, No. 1, pp. 427–433, 2005.
Ma, J., Qi, Z., and Hu, Y., “Synthesis and Characterization of Polypropylene/Clay Nanocomposites,” Journal of Applied Polymer Science, Vol. 82, No. 14, pp. 3611–3617, 2001.
Zhang, Y. Q., Lee, J. H., Rhee, J. M., and Rhee, K. Y., “Polypropylene — Clay Nanocomposites Prepared by in Situ Grafting — Intercalating in Melt,” Composites Science and Technology, Vol. 64, No. 9, pp. 1383–1389, 2004.
Zhang, C., Tjiu, W. W., Liu, T., Lui, W. Y., Phang, I. Y., and Zhang, W. D., “Dramatically Enhanced Mechanical Performance of Nylon-6 Magnetic Composites with Nanostructured Hybrid One-Dimensional Carbon Nanotube-Two-Dimensional Clay Nanoplatelet Heterostructures,” The journal of physical chemistry B, Vol. 115, No. 13, pp. 3392–3399, 2011.
Seo, M. K. and Park, S. J., “Electrical Resistivity and Rheological Behaviors of Carbon Nanotubes-Filled Polypropylene Composites,” Chemical Physics Letters, Vol. 395, No. 1–3, pp. 44–48, 2004.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, MS., Yan, J., Kang, KM. et al. Soundproofing ability and mechanical properties of polypropylene/exfoliated graphite nanoplatelet/carbon nanotube (PP/xGnP/CNT) composite. Int. J. Precis. Eng. Manuf. 14, 1087–1092 (2013). https://doi.org/10.1007/s12541-013-0146-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-013-0146-3