Study of partial discharge and breakdown phenomena at triple junctions under various conditions of pressure and temperature

The presence of a triple junction constitutes a potential source of failure in many industrial applications. The reinforcement of the local electric field due to differences in relative permittivity facilitates the formation of partial discharges (PD) which weaken the insulation system and eventually lead to complete breakdown. Additionally, severe environmental conditions (temperature, pressure) associated with certain applications (e. g. nuclear or aeronautical sector) should be considered because of their influence on discharge phenomena occurring at triple junctions. In this study, the behaviour of partial discharge inception voltage (PDIV) and of breakdown (flash-over) voltage (BIV) is compared in the case of a triple junction with an aluminium oxide disc as a solid insulator when the system is heated up to 400 °C. While the PDIV decreases strongly for temperatures above 300 °C, this effect disappears for the BIV. It is proposed that this behaviour is due to the fact that relative permittivity of the aluminium oxide disc increases with temperature at low frequencies, but remains relatively stable at high frequencies, regardless of the temperature.